Tips & Tricks

Bethany Moatts | March 22, 2013

Looking for ways to cut down on the time and computer memory required to run your simulation? Does your model exhibit some form of symmetry — axial symmetry, lines or planes of symmetry, or antisymmetry for example? Or perhaps your model exhibits periodicity? If you answered yes to those questions, you’re in luck. You can model symmetry or periodicity in COMSOL Multiphysics easily by either using a 1D or 2D axisymmetric dimensional simulation or by incorporating boundary conditions that represent […]

Read more ⇢

Article Categories

Walter Frei | March 20, 2013

There is sometimes a need to include data from other simulation packages into a COMSOL Multiphysics model. There are a variety of ways in which this can be done, but one of the easiest approaches is to read in the point cloud data via a spreadsheet format text file. In this blog post, we walk through the steps of reading in such data, and using it in a COMSOL model.

Read more ⇢

Article Categories

Bjorn Sjodin | March 19, 2013

For a transient simulation, imagine if you could simply insert a virtual sensor in a model at a certain location and then monitor the evolution of a field value over time while solving. In COMSOL Multiphysics you can do just that by using Probes. You define a probe in the Model Builder tree right under the Model Definitions node. Measuring the value at a point is not the only thing you can do with probes, but in this blog post […]

Read more ⇢

Article Categories

Valerio Marra | January 14, 2013

We have written several blog posts on postprocessing already, but none detailing postprocessing for CFD. Postprocessing has always been an important part of my teachings, as you learn how to use COMSOL Multiphysics while also gaining insight into the physics at hand. I would like to share with you part of the classwork I proposed when teaching a CFD training course not long ago.

Read more ⇢

Article Categories

Bethany Moatts | November 2, 2012

I’m back on the blog with the latest installment in the Postprocessing and Visualization Videos series. The two-part video shown here covers “Basic Visualization”. Chapter 1 and 2 will give you an overview of COMSOL’s visualization tools so that you can optimize how you view your model, both while setting up your physics and while postprocessing. I explain two tricks in the video that I’d like to draw your attention to in particular.

Read more ⇢

Article Categories

Niklas Rom | October 11, 2012

Oftentimes when you are working with devices with internal fluid flow, the imported CAD design represents the vessel material. The inside is plainly void. This may leave you clueless since it is inside where you want to create a volume mesh for the flow equations. How can you solve this meshing problem in COMSOL?

Read more ⇢

Article Categories

David Kan | September 25, 2012

I give a lot of COMSOL workshops — about 20 so far this year. These are great events and they include hands-on minicourses, which allow me to connect with the audience. One topic that I often spend a few minutes on might surprise you: icons. The icons, especially those found at the nodes in the Model Builder, are packed with useful information. They’re easy to miss because they’re small, but knowing what they mean can be a big help.

Read more ⇢

Article Categories

Bethany Moatts | August 28, 2012

Would you like to plot your own expressions in COMSOL? Have you ever wanted the power to measure parameters from your virtual model at whatever point you’d like, just as you would in a physical model? This new postprocessing tutorial video duo explains how to create 1D plots in COMSOL.

Read more ⇢

Article Categories

Bethany Moatts | August 7, 2012

As promised, I’m back to introduce to you the second tutorial video in the new postprocessing blog series. This video covers the basics of creating plots, including some useful ways you can tweak and customize your plots. For example, have you ever wanted to improve the resolution of a plot, add or modify titles and axis labels, standardize the color bars over multiple graphs in one plot group, modify a deformation plot’s scaling, or view multiple plots in the COMSOL […]

Read more ⇢

Article Categories

Niklas Rom | August 2, 2012

It has been some time since we’ve had the “Tips & Tricks” column in COMSOL News. Many people have asked me for tips on how to use COMSOL Multiphysics, so I figured I would share some with you here on the blog. The first in this new series of tips and tricks explains how you can create high-resolution images of COMSOL models.

Read more ⇢

Article Categories

Bethany Moatts | July 31, 2012

Are you getting the most out of your simulations? There’s a wealth of options for creating plots and animations and for computing and exporting data in COMSOL, odds are you will find some neat features here. We want to get you off to a good start, so I’ve begun a series of tutorial videos covering a wide variety of topics in postprocessing. This tutorial series is suited for new and experienced users alike. You will get to learn the basics […]

Read more ⇢

Article Categories