How to provide a pulsed input???

Topics: AC/DC Module

Thread index  |  Previous thread  |  Next thread  |  Start a new discussion

RSS FeedRSS feed   |   Email notificationsTurn on email notifications   |   6 Replies   Last post: October 4, 2012 5:48am UTC
Muthuraman Chinnadurai

Muthuraman Chinnadurai

October 3, 2012 7:05am UTC

How to provide a pulsed input???

Hello,
Am working on AC/DC module and would be grateful if you guys could help me for my problem.
My issue is to give an pulsed input of 1200v with duration of 10^(-9)second.

Thanks in advance.

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Li-ion

Li-ion

October 3, 2012 8:03am UTC in response to Muthuraman Chinnadurai

Re: How to provide a pulsed input???

Hi,

You can use "step" function of COMSOL:

step1(t-t_start)*1200-step1(t-t_start-dt_pulse)*1200

t_start= instant that you want to impose the pulse
dt_pulse=1e-9
Set the size of transition zone of "step" function, time step enough small (<1e-9)

Regards,

Dinh

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Muthuraman Chinnadurai

Muthuraman Chinnadurai

October 3, 2012 8:20am UTC in response to Li-ion

Re: How to provide a pulsed input???

Thank you very much for reply Mr.Dinh
Since am totally new to comsol i would love the opportunity of receiving further assistance.
I had designed a model which include a circular dielectric material and two electrodes ?(Positive & ground)
All i know about applying voltage is to enter 1200 in the equation which appears when i click Electric potential under Electrostatics.May i kindly request your esteemed self to add more details such as where to enter the values etc.
Thank you.

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Muthuraman Chinnadurai

Muthuraman Chinnadurai

October 3, 2012 4:04pm UTC in response to Muthuraman Chinnadurai

Re: How to provide a pulsed input???

may i know where to find the step function?

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Muthuraman Chinnadurai

Muthuraman Chinnadurai

October 3, 2012 4:28pm UTC in response to Li-ion

Re: How to provide a pulsed input???

May i know where to find the step function?

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Ivar Kjelberg

Ivar Kjelberg

October 3, 2012 4:54pm UTC in response to Muthuraman Chinnadurai

Re: How to provide a pulsed input???

Hi

in v4 under Definitions - Functions you find several predefined functions, and several have "smoothing " options for the else sharp edges, check the sub nodes of the functions

--
Good luck
Ivar

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Muthuraman Chinnadurai

Muthuraman Chinnadurai

October 4, 2012 5:48am UTC in response to Ivar Kjelberg

Re: How to provide a pulsed input???

Thank you sir!!!!

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse


Rules and guidelines