Reading Deformation graph

Topics: no topics

Thread index  |  Previous thread  |  Next thread  |  Start a new discussion

RSS FeedRSS feed   |   Email notificationsTurn on email notifications   |   3 Replies   Last post: January 7, 2013 7:24am UTC
Gagandeep Singh

Gagandeep Singh

January 2, 2013 7:41am UTC

Reading Deformation graph


I am getting a coloured graph for deformation in microgripper.
Now I want to get the values of deformation at different point(x,y,z) (instead of graph)

please let me know how to get that in comsol.

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Ivar Kjelberg

Ivar Kjelberg

January 2, 2013 8:29am UTC in response to Gagandeep Singh

Re: Reading Deformation graph

Hi

3D or 2D color views are not relaay there to do measurements but to give nice views, to get a eformation, its better to use line graphs along an edge or a "data set - cut line" and ask for the displacement u,v,w or disp

In 2D views you can set contour gaph ontop or you can add the "more - minmax points" on your graph

If you are new to COMCOL its worth to play several of the video presentationson the main site, there are many trics too learn, and use the help ;) i.e. "results" video

--
Good luck
Ivar

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Gagandeep Singh

Gagandeep Singh

January 7, 2013 6:04am UTC in response to Ivar Kjelberg

Re: Reading Deformation graph

Hi Ivar,
Thanks for reply....

Actually I have checked videos available on comsol website but i didnt get anything related to generate a graph or table from simulation.
please share any document or procedure regarding that.Meanwhile i will be finding out in comsol help documentation

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Ivar Kjelberg

Ivar Kjelberg

January 7, 2013 7:24am UTC in response to Gagandeep Singh

Re: Reading Deformation graph

Hi

sure you do not find your solution in one of these ?

www.comsol.eu/video/167/
www.comsol.eu/video/371/
www.comsol.eu/video/375/
www.comsol.eu/video/395/
www.comsol.eu/video/397/
www.comsol.eu/video/425/
www.comsol.eu/video/427/
...
--
Good luck
Ivar

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse


Rules and guidelines