Settings for simulating static or rf field between metallic contacts

Thread index  |  Previous thread  |  Next thread  |  Start a new discussion

RSS FeedRSS feed   |   Email notificationsTurn on email notifications   |   1 Reply   Last post: April 4, 2013 9:03pm UTC
moka

moka

April 4, 2013 7:43pm UTC

Settings for simulating static or rf field between metallic contacts

Hi, I'm a new Comsol user and I'm interested to simulate the 2d field between two electrodes on a substrate. The electrodes can work at low but also at high frequencies. I've been able to draw the metallic contacts on top of the substrate but I don't know how to put a voltage between the two contacts in order to create an electric field between them. Can someone give me an hint?
Thanks

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse

Ivar Kjelberg

Ivar Kjelberg

April 4, 2013 9:03pm UTC in response to moka

Re: Settings for simulating static or rf field between metallic contacts

Hi

check the lumped Terminal / Ports BC's (Boundary conditions). And take a look at some of the model library models, as well as the videos on the main web site, these are great to learn from

--
Good luck
Ivar

Reply  |  Reply with Quote  |  Send private message  |  Report Abuse


Rules and guidelines