-
Filter by Topic
Most Popular
All Topics
- List all discussions
Facebook
Twitter
Delicious
Digg
Stumbleupon
More services...hi
|
Thread index | Previous thread | Next thread | Start a new discussion |
RSS feed |
Turn on email notifications |
2 Replies
Last post: August 11, 2010 1:08pm UTC
July 30, 2010 8:42pm UTC
hi
hi
i'm trying to use comsol for wind turbine , how can i make the blade moving in the air tunnel by the wind force
cheers
Reply | Reply with Quote | Send private message | Report Abuse
August 11, 2010 1:07pm UTC in response to MOHAMED MOHAMED
Re: hi
Hi MOHAMED,
Regarding wind turbine application the generator should have a minimal
reluctance torque and require to be direct-driven to lessen mechanical losses in the application.
For this objective the stator winding is wound around a slotless ring core. The rotor disc has
18 surface installed magnet poles.
--
Jessica Leahy
http://CollectWealth.ws
Reply | Reply with Quote | Send private message | Report Abuse
August 11, 2010 1:08pm UTC in response to MOHAMED MOHAMED
Re: hi
Hi MOHAMED,
Regarding wind turbine application the generator should have a minimal
reluctance torque and require to be direct-driven to lessen mechanical losses in the application.
For this objective the stator winding is wound around a slotless ring core. The rotor disc has
18 surface installed magnet poles.
--
Jessica Leahy
http://CollectWealth.ws
Reply | Reply with Quote | Send private message | Report Abuse
Rules and guidelines
