COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - Mesh

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Announcement Announcement Now available: COMSOL 5.1 Update 2 428 0 1 month ago
Author Subject Views Replies Last Post
Giada Prova Giada Prova Setting pressure
5 , CFD , Physics , Solving , Results and visualization , Fluid Flow , Mesh
40 2 9 hours ago
Ash Smith Ash Smith Solving a coupled system of convection-diffusion equation
Definitions and operators , Application Builder , Solving , Physics , Mesh , 4.4 , 5.1 , 5
8 0 14 hours ago
Anna Rubin Anna Rubin Simulating strain due to lattice mismatch
5 , Physics , Mesh , Structural Mechanics , Definitions and operators
12 0 2 days ago
Mohamed Youssef Mohamed Youssef 3D Nanosecond Pulsed laser simulation
Laser , Mesh , Physics , Heat Transfer , 4.0a , Materials and functions
5,840 5 3 days ago
Giovanni Talei Franzesi Giovanni Talei Franzesi cardiovascular stent crimping (and expansion)
5.1 , Mesh , Structural Mechanics , nonlinear , Nonlinear Structural Materials Module , Solving
21 0 6 days ago
Goutham Goutham Laser Drilling on silicon carbide
laser drilling , Material removal , phase change , 3.5 , 3.5a , 4.1 , 4.2a , 4.2 , 4.3 , 4.3a , 4.3b , 4.4 , Materials and functions , Physics , Mesh , Geometry , Heat Transfer , Plasma Module
2,210 2 1 week ago
Bo Gong Bo Gong Meshing introduced spiky edges??
4.4 , Mesh , Geometry , AC/DC Module
28 0 1 week ago
Jane Li Jane Li modelling of membrane deformation and microvalves
5 , Structural Mechanics , Mesh , Geometry , Results and visualization , Microfluidics
16 0 1 week ago
Jane Li Jane Li modelling of membrane deformation and microvalves
5 , Structural Mechanics , Mesh , Geometry , Results and visualization , Microfluidics
13 0 1 week ago
Ezekiel Yorke Ezekiel Yorke Two Stream Simulation
5.1 , Mesh , Fluid Flow , Geometry , Physics , Solving
42 0 2 weeks ago
Ismail Isa Danfillo Ismail Isa Danfillo Creating edge and/or boundary seelection
5.1 , Geometry , Mesh
34 1 2 weeks ago
Albert Carles BrangarĂ­ Albert Carles BrangarĂ­ Mass conservation in deformed geometries
Concentration , Fluid Flow , Mesh , Physics , Geometry
37 0 2 weeks ago
Craig Vandervelden Craig Vandervelden Viewing mesh of an axisymmetric model in different planes
Mesh , Results and visualization , 5 , Geometry
44 1 2 weeks ago
Milad Zolfagharloo Koohi Milad Zolfagharloo Koohi How to model Surface Roughness in COMSOL 4.4?
Geometry , Mesh , Acoustics Module , MEMS , Structural Mechanics , RF Module
100 0 3 weeks ago
Montassar Sharif Montassar Sharif Vibrating sphere in water
Microfluidics , Structural Mechanics , 4.4 , FSI , Fluid Flow , CFD , Installation , Mesh , MEMS
101 1 3 weeks ago
Ashish Ashish Does size of Geometry affect the solution ?
RF Module , Mesh , Geometry , 4.3
215 5 3 weeks ago
Valerie Bentivegna Valerie Bentivegna Memory error
Mesh , 5.1 , Memory , Structural Mechanics , Geometry
61 0 3 weeks ago
Gomez_csula Gomez_csula Mathematical representation of the physics controlled mesh
Mesh , Fluid Flow
52 0 3 weeks ago
Bastien Sailler Bastien Sailler Deformed geometry at each time-step, if a condition is observed
4.4 , Definitions and operators , Geometry , Solving , Mesh
52 0 3 weeks ago
Onyekachukwu Nnodim Onyekachukwu Nnodim How do i find the centre of mass in a circular shape on COMSOL?
5.1 , 5 , 4.4 , Geometry , AC/DC Module , Mesh , LiveLink products , Fluid Flow
92 2 3 weeks ago
Shen Wang Shen Wang How to assign different meshes to different physics contained in one step?
5.1 , Mesh , Physics
29 0 3 weeks ago
Kavuri Dheeraj Kavuri Dheeraj How to simulate material removal?
Heat Transfer , Solving , Mesh
33 0 4 weeks ago
Onyekachukwu Nnodim Onyekachukwu Nnodim Current Injection and Potential Difference measurements
5 , Physics , Mesh , Solving , AC/DC Module , MEMS
43 0 4 weeks ago
Shai Asher Shai Asher Importing solid meshes
Fluid Flow , Mesh , Geometry
18 0 4 weeks ago
James Lee James Lee "Some geometric entities are missing" in Mesh-geometry converstion
5.1 , Geometry , Mesh
20 0 4 weeks ago

1 2 3 4 5 6 7 8 9 10
Rules and guidelines