User Presentations &
Poster Sessions

Over one hundred user presentations of multiphysics applications will be given at the conference. By attending these sessions, you can connect with your colleagues and learn from their experience using COMSOL Multiphysics. The program includes
moderated user presentation sessions and a grand poster session.
View the growing list of abstract submissions below. This list will be updated periodically.

Presentation sessions

Friday, November 4

Structural Mechanics-I
Transport Phenomena
Heat Transfer
MEMS-I
Poster Session

Saturday, November 5

MEMS-II
Acoustics and Electromagnetics
Bioengineering
Structural Mechanics-II
Poster Session

User Talks

Friday, November 4
Structural Mechanics-I Friday, November 4, 3:30pm - 4:45pm Room: Gokula 2
Heat Generation from Dielectric Loss, Internal Heat Generation and Vibration in COMSOL4.2 Multiphysics T. R. Jeba, B. Vins, and V. Ramamoorthy HCL Technologies
Micro Mechanical Exploration of Composites for Superior Properties R. C. Thiagarajan, and K. V. Chiranjeevi ATOA Scientific Technologies Private Limited Bangalore, India
Modeling and Simulation of MEMS Based 3D Vibrating Gyroscope for Mobile Robotics Applications M. Ramya, R. P. S. Valli, R. Vidya, G. Anju, and M. Alagappan PSG College of Technology Coimbatore Tamil Nadu, India
Multiscale Damage Detection in Conductive Composites R. C. Thiagarajan ATOA Scientific Technologies Private Limited, Bangalore, India
Back to top
Transport Phenomena Friday, November 4, 3:30pm - 4:45pm Room: Davos 2
Effect of Bed Diffusion and Operating Parameters on Char Combustion in the Context of Underground Coal Gasification S. Mahajani, and G. Samdani Indian Institute of Technology Bombay Mumbai, India
Electrowetting-On-Dielectric Induced Droplet Actuation in M x N Array of Electrode S. Sohail1, D. Das1, S. Das2, and K. Biswas1 1Electrical Engineering Department, IIT Kharagpur 2School of Medical Science and Technology, IIT Kharagpur
Finite Element Modeling of Freezing of Coffee Solution C. Anandharamakrishnan, R. Gopirajah, and N. Chhanwal Central Food Technological Research Institute Mysore Karnataka, India
Back to top
Heat Transfer Friday, November 4, 3:30pm - 4:45pm Room: Gokula 1
3-D Design, Electro-Thermal Simulation and Geometrical Optimization of Spiral Platinum Micro-Heaters for Low Power Gas Sensing Applications Using COMSOL 4.1 V. Bansal, D. Kumar, B. Prasad, and A. Gujjar Electronic Science Department
Modelling of limestome Calcination Using Joule Heating R. Kancharla, and M. Ramakrishna Padmasri Dr. B.V.Raju Institute of Technology Narsapur Medak Dist, AP, India
Multiphysics Modeling and Simulation of MEMS Based Thermal Bimorph Sensor Array for Automated Solar Energy Storage Applications K. Umapathi, V. K. Kanna, R. Gowthami, M. Alagappan, and A. Gupta PSG College of Technology Coimbatore Tamil Nadu, India
Simulation of Fast Response Thermocouple for the Nuclear Reactor Core K. Dusarlapudi1, B. K. Nashine2, D. Bai3, and C. S. Babu1 1KL University, Vaddeswaram, Guntur, Andhra Pradesh, India 2E.D&S.S, IGCAR Kalpakkam, India 3VIT, Vellore, India
Simulations of Polymer Based Micro Heater Operated at Low Voltage M. Gayake1, D. Bodas2, and S. A. Gangal1 1Department of Electronic science, University of Pune, India 2Centre for Nanobioscience, Agharkar Research Institute, India
Simulations of polymer based micro heater operated at low voltage Dhananjay Bodas1 Monika Gayake2 SA Gangal2 1Centre for Nanobioscience, Agharkar Research Institute 2Department of Electronic science, University of Pune
Back to top
MEMS-I Friday, November 4, 3:30pm - 4:45pm Room: Davos 1
Analysis of Thermoelastic Damping Effects on Microaccelerometers S. Saseendaran, and M. R. Baiju College of Engineering, Trivandrum, Kerala, India
Design and Characterization of a MEMS Varactor V. S. Nagaraja, N. Suma, and S. L. Pinjare Nitte Meenakshi Institute of Technology
Micromechanical Disk Resonator Based on Acoustic Impedance Mismatch Abhilash Amsanpally1, Srikanth Enjamuri2, Vikram Kumar Singh2, Dr.K.C.James Raju1 1Project Associate, University of Hyderabad, Hyderabad, Andhra Pradesh, India 2Student, M.Tech ICTechnology,University of Hyderabad, Hyderabad, Andhra Pradesh, India
Simulation of Nuclear Radiation based Energy Harvesting Device using Piezoelectric Transducer R. Prakash, K. M. V. Swamy, and B. G. Sheeparamatti Basaveshwara Engineering College Bagalkot, Karnataka, India
Design and Analysis of 3D Capacitive Accelerometer for Automotive Applications G. Vijila, S. Vijayakumar, M. Alagappan, and A. Gupta PSG College of Technology Coimbatore Tamil Nadu, India
Back to top
Saturday, November 5
MEMS-II Saturday, November 5, 10:45am - 12:15pm Room: Gokula 1
A Wide Range MEMS Vacuum Gauge Based on Knudsen’s Forces V. Sista, and E. Bhattarchaya Microelectronics and MEMS Lab Department of Electrical Engineering Indian Institute of technology Madras Chennai, India
Design and Analysis of Micro-tweezers with Alumina as Gripper Using COMSOL Multiphysics V. S. Selvakumar, M. S. Gowtham, M. Saravanan, S. Suganthi, and L. Sujatha Rajalakshmi Engineering College Chennai, India
Design of MEMS Based High Sensitivity and Fast Response Capacitive Humidity Sensor R. Karthick, S. P. K. Babu, A. R. Abirami, and S. Kalainila Periyar Maniammai University Periyar Nagar Vallam, Thanjavur Tamilnadu, India
Simulation of Thermal Sensor for Thermal Control of Sattelite Using COMSOL Multiphysics G. Mangalgiri BITS Pilani K K BIRLA GOA CAMPUS Zuarinagar Goa, India
Analsysis of 3d Pneumatic Solenoidal Microvalve using COMSOL as a analysis tool Suresh E1 1IIT Kanpur
FEM Based Estimation of Biological Interaction Using a Cantilever Array Sensor S. Logeshkumar, L. Lavanya, G. Anju, and M. Alagappan PSG College of Technology Coimbatore Tamil Nadu, India
Back to top
Acoustics and Electromagnetics Saturday, November 5, 10:45am - 12:15pm Room: Davos 1
Analysis and Optimization of Dual Arm, Center Excited, Surface Micro-machined Archimedean Spiral Antenna with Improved Wideband Characterestics G. Miranda1, N. S. Pamidighantam1, R. V. Iyer2, S. Shukla3, P. Suresh3, and P. M. Soundarajan3 1Department of Telecommunications, PESIT, Bangalore,Karnataka,India 2Department of Science and Humanities, PESIT, Bangalore,Karnataka,India 3DARE,Bangalore,Karnataka,India
Characterization of a Tonpilz Transducer and Performance Analysis for a MEMS-Transducer Array V. Vadde, and B. Lakshmi G PESIT
Efficient computation of Modulation Bandwidth of GaInAsP/InP Distributed Reflector (DR) Laser with Quantum Wire Structures Mahjabin Mibarak1 1Department of Applied physics and Electronics and Communication Engineering, University of Dhaka
Numerical Modelling of Wave Propagation in Particulate Composites P. S. K. Mylavarapu, and S. Boddapati Defence Metallurgical Research Laboratory
On the Simulation of Electromagnetic Forming Process of a Tube using Multiphysics Software S. Gawade1, P. P. Date2, and S. B. Sharma1 1Production Engineering. Dept. SGGS IE&T, Nanded, India 2Mechanical Engineering. Dept, IIT, Bombay, India
Structured Ultrasonic Metasurfaces R. C. Thiagarajan ATOA Scientific Technologies Private Limited Bangalore, India
Back to top
Bioengineering Saturday, November 5, 10:45am - 12:15pm Room: Gokula 2
Design, Simulation and Study of MEMS Based Micro-Needles and Micro-Pump for Biomedical Applications P. K. Podder, D. Mallick, D. P. Samajdar, and A. Bhattacharyya Institute of Radio Physics and Electronics University of Calcutta Kolkata West Bengal, India
Modeling of Articular Cartilage Growth Using COMSOL K. Manda, and A. Eriksson KTH Mechanics Royal Institute of Technology 100 44 Stockholm, Sweden
Numerical Study on Mechanical Properties of Stents with Different Materials during Stent Deployment with Balloon Expansion. P. Ghosh1, K. DasGupta1, D. Nag2, and A. Chanda1 1School of Bio Science & Engineering, Jadavpur University, Kolkata, West Bengal, India 2Mechanical Engineering Department, Jadavpur University, Kolkata, West Bengal, India
Simulation of MEMS based Flexible Flow Sensor for Biomedical Application D. Maji1, C. P. Ravikumar2, and S. Das1 1School of Medical Science and Technology, Indian Institute of Technology, Kharagpur, West Bengal, India 2Texas Instruments (India) Pvt. Ltd., Bangalore, India
Voltage and Capacitance analysis of EWOD system using COMSOL D. Das1, S. Sohail1, S. Das2, and K. Biswas1 1Electrical Engineering Department, IIT Kharagpur, India 2School of Medical Science and Technology, IIT Kharagpur, India
Back to top
Structural Mechanics-II Saturday, November 5, 10:45am - 12:15pm Room: Davos 2
Design and Analysis of Implantable Nanotube Based Sensor for Continuous Blood Pressure Monitoring M. Silambarasan, T. Prem Kumar, M. Alagappan, and G. Anju PSG College of Technology Coimbatore Tamil Nadu, India
Design and Finite Element Analysis of Electrothermal Compliant Microactuators A. R. Kalaiarasi, and S. H. Thilagar Annauniversity Chennai TamilNadu, India
Design and Simulation of 3D ZnO Nanowire Based Gas Sensors for Conductivity Studies N. Gouthami, D. Parthiban, M. Alagappan, and G. Anju PSG College of Technology Coimbatore Tamil Nadu, India
Effect of Workpiece Flatness and Surface Finish on the Contact Force of a Magnetic Gripper R. S. Wadhwa1, T. Lien1, and G. Monkman2 1NTNU Valgrinda, Inst. for produksjons- og kvalitetstek., Trondheim, Norway 2FH Regensburg, Regensburg, Germany
Experimentally Validated Finite Element Modeling of Compact Compliant Radially Deployable Actuator Puneet Singh1 1Multi-disciplinary and Multi-scale Device and Design (M2D2) Laboratory Department of Mechanical Engineering Indian Institute of Science, Bangalore, India
Back to top

Poster Session

3-D Design, Electro-Thermal Simulation and Geometrical Optimization of Spiral Micro-heaters for Low Power Gas Sensing Applications using COMSOL Multiphysics Dinesh Kumar1 Vineet Bansal1 Anil Gurjar1 Mukesh Kumar1 B.Prasad1 1Electronic Science Department,Kurukshetra University

A MEMS Condenser Microphone for Consumer Applications S. L. Pinjare, V. S. Nagaraj, S. N. Savitha, S. Kesari, M. S. Sagar, and K. R. Roshan Nitte Meenakshi Institute of Technology

Analysis of Magnetic Resonance in Metamaterial Structure C. Rajni1, and A. Marwaha2 1 Shaheed Bhagat Singh College of Engineering And Technology, Ferozepur, Punjab, India 2 Sant Longowal Institute of Engineering And Technology, Sangrur, Punjab, India

Behavioural Change on EM Exposure and its Modelling K. Singh, N. Kothari, and S. Choudhary Electronics and Communication Engineering Department Geetanjali Institute of Technical Studies Dabok, Udaipur Rajasthan, India

Centrifugal Stress Analysis on Small Cryogenic Turboexpander Bhaskar Rahul Nandi and Parthasarathi Ghosh Indian Institute of Technology, Khargpur

CFD Analysis of Argon Cell for Pyrochemical Processing S. Agarwal1, S. P. Ruhela1, B. Muralidharan1, B. P. Reddy2, B. K. Sharma1, K. Nagarajan2, C. A. Babu3, and K. K. Rajan1 1Fast Reactor Technology Group, Indira Gandhi Centre for Atomic Research 2Chemistry Group, Indira Gandhi Centre for Atomic Research 3HBNI & CDG, Indira Gandhi Centre for Atomic Research

Comparative Study of Different Piezo-Electric Materials Based Ultrasonic Transducer Model. P. Pattanaik, S. Mohapatra, S. K. Kamilla, and G. Bose SOA University Bhubaneswar Odisha, India

Computational Analysis of Presently Used and Alternative Forms of Thrust Reversers Deepanshu Srivastav1 and Sahil Malhotra2 1BE(Hons.) Chemical Engineering, BITS Pilani K K Birla Goa Campus 2BE(Hons.) Mechanical Engineering - MSc(Hons.) Economics, BITS Pilani K K Birla Goa Campus

Current Density, Electric Field and AC Loss Simulation of Mono Block and Single Layer Polygonal HTS Cable Using COMSOL Multiphysics G. Konar2, R. K. Mandal1, and N. Chakraborty2 1Electrical Engineering Department, Seacom Engineering College, Dhulagar,West Bengal, India 2Power Engineering Department, Jadavpur University, Kolkata, West Bengal, India

Design and Simulation of a Nano-Wire Based Piezoresistive Pressure Sensor S. A. Selvin, N. B. Moorthy, G. Anju, and M. Alagappan PSG College of Technology Coimbatore Tamil Nadu, India

Design and Simulation of a Valveless Polymeric Micropump for Drug Delivery Applications S. Babu1, and P. Manohar2 1Department of Electrical and Electronics Engineering, M S Ramaiah Institute of Technology, Bengaluru, Karnataka, India 2Department of Medical Electronics, M S Ramaiah Institute of Technology, Bengaluru, Karnataka, India

Design and Simulation of MEMS Based Electrothermal Micromirror for 3D Spatial Movement D. Mallick, and A. Bhattacharyya Institute of Radio Physics and Electronics University of Calcutta West Bengal, India

Design of a Miniaturized RF MEMS Based Single-Bit Phase Shifter A. Chakraborty, A. Kundu, S. Chatterjee, and B. Gupta Jadavpur University Kolkata West Bengal, India

Design of a RF MEMS Switch B. Mishra, M. P. S. Naidu, J. Raj, and Z. C. Alex VIT University Vellore Tamilnadu, India

Determination of Fundamental Frequency of a Thin Rectangular Perforated Plate using COMSOL Multiphysics SODISETTY V N B PRASAD1 BEJGAM RAGHAVENDRA2 1BITS PILANI K K BIRLA GOA CAMPUS 2BITS PILANI CAMPUS

Determination of Fundamental Frequency of a Thin Rectangular Perforated Plate using COMSOL Multiphysics S. V. N. B. Prasad, and B. Raghavendra BITS PILANI K K BIRLA GOA CAMPUS, India

Effect of Channel Width on Fuel Cell Performance Using 3D Modelling R. Pushpangadan, S. S. Dimble, and S. P. Duttagupta IIT Bombay Mumbai Maharasthra, India

Evaluation of Tensile Modulus of Carbon Nanotube Bundle Based Composite with Interface Using Finite Element Method M. S. Islam, F. O. Riktan, S. C. Chowdhury, M. M. R. Chowdhury, and S. Ahmed Bangladesh University of Engineering & Technology (BUET) Dhaka, Bangladesh

Experimental and Theoretical Investigation of Acoustic Metamaterial with Negative Bulk-Modulus N. R. Mahesh, and P. Nair SSN College of Engineering Chennai Tamil Nadu, India

FEM Study on the Effect of Metallic Interdigital Transducers on Surface Acoustic Wave(SAW) Velocity in SAW Devices A. K. Namdeo, and H. B. Nemade Department of Electronics and Electrical Engineering Indian Institute of Technology Guwahati Assam, India

Finite Element Analysis of Curved Cone Corrugated Ground Plane Conical Antenna R. Sharma, and A. Marwaha SLIET, Longowal, Sangrur Punjab, India

Finite Element Modeling of Volume Expansion of Bun During Baking Process N. Chhanwal, D. Indrani, and C. Anandharamakrishnan Central Food Technological Research Institute Mysore Karnataka, India

Heat Transfer Modeling and Analysis of a Rotary Regenerative Air Pre-heater R. K. Krishna, R. Ramachandran, and P. Srinivasan Birla Institute of Technology and Science Pilani Rajasthan, India

Intraplate Stress Analysis by COMSOL Multiphysics G. Swetha, G. Pavankumar, and A. Manglik National Geophysical Research Institute Hyderabad Andhra Pradesh, India

Lab on Chip for Detection of E.coli Cell Using Capacitance Modulation S. Gupta Visvesvaraya National Institute of Technology Nagpur Maharashtra, India

Measurement of Pressure in Fluid Pipeline by COMSOL Multiphysics and MEMS Layer Installation and Data Transfer of Pressure to Remote Maintenance System using a Wide Band Transceiver. N. Vallavan Institute for Energy Studies

MEMS Electrostatic Comb Actuator: A Comparison of Different Structure Designs and Materials using COMSOL 3.5a S. Kapoor1, D. Aggarwal2, and A. Gujjar1 1University Institute of Engineering and Technology, Kurukshetra University, Kurukshetra, Haryana, India. 2Electronics Science Department, University Institute of Engineering and Technology, Kurukshetra University, Haryana, India.

MEMS Resonator for RF Applications V. Harshey Visvesvaraya National Institute of Technology Nagpur Maharashtra, India

Modeling and Simulation of Circular and Square Diaphragm Absolute Micro Pressure Sensors using COMSOL M. Sundaram1, A. Simha2, S M. Kulkarni3, and S. Bhat4 1Department of ICE, Manipal Institute of Technology, Manipal, India 2Department of Mechatronics, National Institute of Technology, Suratkal, India 3Department of Mechanical, National Institute of Technology, Suratkal, India 4Department of E&C, Manipal Institute of Technology, Manipal, India

Modeling of Dehydration of Mushroom Using Finite Element Method C. Anandharamakrishnan1, A. Choudhary2, and R. Gopirajah 1 1Human Resource Development,CSIR-Central Food Technological Research Institute, Mysore, India 2Manipal Institute of Technology, Manipal, Karnataka, India

Modeling, Fabrication and Characterization of a MEMS Based Micropump for a Gas Analyser K. Ganeshan1, and V. Palanisamy2 1Annauniversity of Technology Coimbatore,Tamilnadu,India 2Info Institute of Technology Coimbatore, Tamilnadu, India

Multiphysics Modeling of Implantable Micro-Electrode for Diagnostic and Therapeutic Applications in Neural Disorders H. W. Ferose, R. G. Prasath, M. Alagappan, and G. Anju . PSG College of Technology Coimbatore Tamil Nadu, India

Optimization of the Design Parameters of a Piezoelectric Actuator G. Srivastava1, R. Sharma1, A. Goswami2, A. Phani2, and R. K. Dwivedi1 1Jaypee Institute of Information Technology, India 2Indian Institute of Science, India

Optimized Design of Shielded Microstrip Lines using Adaptive Finite Element Method P. Kakria1, A. Marwaha1, and M. S. Manna2 1Electronics & Communication department, SLIET Longowal, Distt. Sangrur, Punjab, India. 2Electrical & Instrumentation department, SLIET Longowal, Distt. Sangrur, Punjab, India.

Simulation Based Approach to Fluorescence Diffuse Optical Tomography R. Singh, and I. Jose BITS Pilani Goa Campus Goa, India

Study of Subwavelength Gratings to Understand Their Polarization Behaviour M. G. Sridharan1, A. Prabhakar2, and S. Bhattacharya2 1Photonics Group, Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India 2Department of Electrical Engineering, Indian Institute of Technology Madras, Chennai, India

Theoretical Study of Surface Plasmon Soliton Interaction with Non Linear Kerr Effect in Metal Dielectric Medium M. Durai, and T. Alagesan Presidency College, Chennai, Tamilnadu, India

Three-dimensional Simulations of Metamaterials at Optical Frequencies Govind Dayal Singh and S. Anantha Ramakrishna Department of Physics, Indian Institute of Technology Kanpur 208016, India

Two-Dimensional Quasi–Static Analysis For Induction Motor with Faulty Rotor M. Manna, and S. Miglani SLIET Sangrur Punjab, India

Vocal folds: 2D/3D hybrid model P. George, D. Cook, and M. Julias Division of Engineering, New York University Abu Dhabi, UAE

Back to top