Program

COMSOL Conference User Presentations

User Presentations

Over 150 presentations on multiphysics simulation will be given at the conference by our users. By attending these sessions, you can connect with your colleagues and learn from their experience using COMSOL Multiphysics. The program includes moderated user presentation sessions and a grand poster session.

As abstracts are reviewed and assigned to a session, they will be added to these proceedings.

Proceedings

AC/DC Electromagnetics

Friday, November 14, 10:45am - 12:15pm
Room: Grand Victoria 2
Carbon Steel Pipeline Wall Thickness Measurement Using Pulsed Eddy Current Technique
S. Roy1, T. V. Shyam2, B. S. V. G. Sharma2, S. K. Pradhan1
1Atomic Energy Regulatory Board
2Bhabha Atomic Research Centre
Design and Analysis of an Electrostatic Precipitator for a Diesel Particulate Filter
MANOJ.S1, Mr.R.giri2, Mr.V.s.selvakumar1
1Assistant professor, Rajalakshmi engineering college,chennai
2Associate professor, Rajalakshmi engineering college, chennai
Estimation of Critical Parameters of Drop-Drop Electrocoalescence using Multiple Drops System
Sonali Shirish Kulkarni1, Aman Chheda2, Vinay A. Juvekar1
1Indian Institute of Technology, Bombay, Powai, Mumbai-400 076, India
2Institute of Chemical Technology, Matunga, Mumbai-400 019, India
Radially and Tangentially Magnetized PM BLDC Motor - A Comparative Analysis Using Finite Element Method
K. S. Shinoy
Vikram Sarabhai Space Centre, Thiruvananthapuram, Kerala, India

Acoustics & Vibrations

Thursday, November 13, 4:00pm - 5:00pm
Room: Arabica
Effect of Length on the Acoustic Performance of Tuned Extended Concentric Tube Resonator
D. Neihguk, A. Prasad
Mahindra & Mahindra Ltd., Chennai, Tamil Nadu, India
Seismic Control of a Structure using Laminated Rubber Bearings
Ruban Sugumar1, Chandra Shekhar Kumar2, Tushar K. Datta3
1Sharda University, Greater Noida, U. P. India
2MVN University, Palwal, U. P. India
3Indian Institute of Technology
Vibro-Acoustic Analysis of Motorcycle Engine under Combustion Load
U. Mohite, N. Bhatia
Mahindra Two Wheelers Ltd., Pune, Maharashtra, India

Batteries & Fuel Cells

Thursday, November 13, 4:00pm - 5:00pm
Room: Board Room 2
A Comparative Study of the Basic Flow Field Designs for High Temperature Proton Exchange Membrane Fuel Cells
A. Lele1, N. Lodha1, R. Srivastava1, A. Pandey2, A. Paul3
1CSIR - National Chemical Laboratory, Pune, Maharashtra, India
2Reliance Industries Ltd., Reliance Technology Group, Navi Mumbai, Maharashtra, India
3CSIR - Central Electrochemical Research Institute, Karaikudi, Tamil Nadu, India
Computational Multiphysics to Optimize Humidification Chamber for a Novel PEM Fuel Cell Power System Used in Automobile Application
M. Raja
Tata Motors, Bengaluru, Karnataka, India
Sensitivity Analysis for High Temperature Proton Exchange Membrane Fuel Cell
A. Lele1, N. Lodha1, R. Srivastava1, U. Bipinlal1, A. Pandey2, A. Paul3
1CSIR - National Chemical Laboratory, Pune, Maharashtra, India
2Reliance Industries Ltd., Reliance Technology Group, Navi Mumbai, Maharashtra, India
3CSIR - Central Electrochemical Research Institute, Chennai, Tamil Nadu, India

Bioscience & Bioengineering

Friday, November 14, 10:45am - 12:15pm
Room: Arabica
Comparative Study on 3D Modeling Of Breast Cancer Using NIR-FDOT
S. Peter
Christ University, Bengaluru, Karnataka, India
Modeling and Simulation of Drug Release through Polymer Matrices
Dr. V. Runkana1, A. Pareek1, P. Arora2
1TRDDC, Tata Consultancy Services, Pune, Maharashtra, India
2Indian Institute of Technology Delhi, New Delhi, Delhi, India
Multiphysics Modeling of a Grain Storage Chamber
P. Guha, P. Sharma, V. Malhotra, S. Mishra
CSIR - Central Scientific Instruments Organisation, Chandigarh, India

Numerical Simulation of Blood Flow in a Straight Artery under the Influence of Magnetic Field
G. C. Shit1, A. Sinha1, A. Mondal1, Sreeparna Majee1
1Department of Mathematics, Jadavpur University, Kolkata – 700032, India
Smart Chest Belt for Cardiac Health Monitoring
M.Vijayalakshmi1, RajC.Thiagarajan1
1ATOA SCIENTIFIC TECHNOLOGIES PVT LTD, 204 Regent Prime, 48 Whitefield Main Road, Whitefield, Bangalore 560066, India.

Computational Fluid Dynamics

Friday, November 14, 10:45am - 12:15pm
Room: Grand Victoria 1
An Overview of Impellers, Velocity Profile and Reactor Design
P. Patel1, P. Vaidya1, G. Singh2
1Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
2Indian Oil Corporation Limited, Faridabad, Haryana, India
Effect of Magnetic Field on MR-Fluid in Ball End Magnetorheological Finishing
H. Garg, V. S. Negi, A. S. Kharola, R. Sharma
CSIR - Central Scientific Instruments Organization, Chandigarh, India
Modelling and Simulation of Pressure Seals
R. P. Ruby1, G. Kulkarni2, U. Kanade1
1Noumenon Multiphysics Pvt. Ltd., Pune, Maharashtra, India
2Oneirix Engineering Laboratories Pvt. Ltd., Pune, Maharashtra, India
Network-of-Zones Model for Stirred Tank with Fractal Impeller
G. M. Mule, A. A. Kulkarni
CSIR - National Chemical Laboratory, Pune, Maharashtra, India
Optimization of Orifice Type Aerostatic Thrust Bearing Design using Genetic Algorithm
N. C. Murmu, P. Samanta
CSIR - Central Mechanical Engineering Research Institute, Durgapur, West Bengal, India

Electromagnetic Heating

Thursday, November 13, 4:00pm - 5:00pm
Room: Board Room 1
Electric Field Calculations for AC and DC Applications of Water Controlled Cable Termination
T. Karmokar, Dr. R. Pietsch
HIGHVOLT Prüftechnik Dresden GmbH, Dresden, Sachsen, Germany
Numerical Prediction of Weld Bead Geometry in Plasma Arc Welding of Titanium Sheets using COMSOL®
V.Dhinakaran1, S. Khope1, N. S. Shanmugam 1, K. Sankaranarayanasamy1
1Department of Mechanical Engineering,National Institute of Technology,Tiruchirappalli 620 015 Tamil Nadu, India
Simulation and experimentalSimulation and Experimental Validation of Direct Heating of Dhruva Fuel Rod for β heat treatment
B.Patidar1, A.P.Tiwari1, V. Patidar1, M.M.Hussain1, K.K.Abdulla1
1Bhabha Atomic Research Centre,Mumbai,Maharashatra,India

Heat Transfer with Phase Change

Thursday, November 13, 4:00pm - 5:00pm
Room: Grand Victoria 1
Estimation of Tungsten Melt-Zone Size Occurred during Transient Heat Loads
Y. Patil, S. S. Khirwadkar, S. Belsare
Institute for Plasma Research, Gandhinagar, Ahmedabad, India
Micromechanical Design of Novel Thermal Composites for Temperature Dependent Thermal Conductivity
RajC.Thiagarajan1
1ATOA Scientific Technologies Pvt Ltd, Bangalore 560066, India.
Numerical Modeling of the Near-Subsurface Temperature Distributions in Presence of Time Varying Air Temperature in the Boundary Condition and Space Varying Temperature for the Initial Condition
M. Ravi, D. V. Ramana, R. N. Singh
CSIR - National Geophysical Research Institute, Hyderabad, Telangana, India
Virtual Pharmacokinetic Model of Human Eye
L. Murtomäki1, S. Kotha2
1Aalto University, Greater Helsinki, Finland
2University Of Helsinki, Helsinki, Finland

MEMS & Piezoelectric devices

Friday, November 14, 10:45am - 12:15pm
Room: Board Room 2
Cancer Detection using Coagulation Therapy with Coaxial Antenna
Shaik Mohammed Ali1, Arpana Kumari jha1, Sakuntala Mahapatra1, Millee Panigrahi1
1National MEMS design centre, Dept of Electronics and Telecommunication engg, Trident Academy of Technology,Bhubaneswar-751024
Design and Analysis of Fluid Structure Interaction for Elbow Shaped Micro Piping System
VALLURU SAI PAVAN RAJESH1
1St. Mary's Group of Institutions, Jawarharlal Nehru Technological University-Hyderabad
Design and Characterization of MEMS Based Accelerometers for Various Applications
R. Singh1, M. Singh2
1National Institute of Technology Karnataka, Surathkal, Karnataka, India
2Indian Institute of Technology Delhi, New Delhi, Delhi, India
Modeling and Simulation of High Sensitivity CMOS Pressure Sensor Using Free Boundary Circular Diaphragm embedded on Ring Channel Shaped MOSFET
STEFFY JOY1, TEENU TOM1
1Rajagiri School of Engineering and Technology, Ernakulam, Kerala, India
Simulation of a Voltage Controlled Resistor Mimicking the Geometry of a MOSFET Device having Graphite Channel
M. Bhattacharjee, N. Mandal, H. Nemade, D. Bandyopadhyay
Indian Institute of Technology Guwahati, Guwahati, Assam, India

Simulation of Motion of a Slider upon a Stator due to Frictional Force using COMSOL Multiphysics®
H. B. Nemade1
1Indian institute of Technology Guwahati, India

Microfluidics

Friday, November 14, 10:45am - 12:15pm
Room: Robusta
Computational Study on Transition of Oil-Water Flow Morphology due to Sudden Contraction in Microfluidic Channel
J. Chaudhuri, S. Timung, T. K. Mandal, D. Bandyopadhyay
Indian Institute of Technology Guwahati, Guwahati, Assam, India
Estimation of Fluid Pressure in the Process of Magneto-rheological Flow Finishing
S. Chothe, P. Ranjan, Dr. P. M. Pawar, A. B. Shinde
SVERI's College of Engineering, Pandharpur, Maharashtra, India
Hydrodynamic flow focusing for microfluidic cell sorting chip
N. Mehendale1, D. Paul1
1Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
Numerical Investigation of Micronozzle Performance for Various Nozzle Geometries
P. A. Haris, T. Ramesh
National Institute of Technology Tiruchirappalli, Tiruchirappalli, Tamil Nadu, India

Poster Session

Thursday, November 13, 6:30pm - 8:00pm
Room: Grand Victoria Lobby
Tunable Fano-Resonance in Terahertz Metamaterials
B. R. Sangala1, H. Surdi1, P. Deshmukh1, G. Rana2, A. V. Gopal1, S. S. Prabhu1
1Department of Condensed Matter Physics, Tata Institute of Fundamental Research, Mumbai, Maharashtra, India.
2Department of Electrical Engineering, IIT Bombay, Mumbai, Maharashtra, India.
A numerical study of momentum and forced convection heat transfer around two cylinders with obstructions arranged in tandem
E. Tejaswini1, B. Sreenivasulu1, L. S .Neeharika1, Y. N. Pranita1
1Gayatri Vidya Parishad College Of Engineering,Visakhapatnam,Andhra Pradesh,India
A Parametric Study of the Tube Deformation during Electromagnetic Forming Through a Coupled Magnetic-Structural Finite Element Model
A. Kapil
1 Indian Institute of Technology Hyderabad,Telangana,India
A Study of Thermal Stress distribution produced during MEMS Packaging
Vaibhav Sharma1, A.K Jayanthy2, Jujan Gandha Baruah3, J.Vijay Prabhu4, Krishna Balakrishnan5
1 Electronics and Instrumentation Department, SRM University, ntra College Rd, Potheri, Guduvancheri, Tamil Nadu, India
2Electronics and Instrumentation Department, SRM University, ntra College Rd, Potheri, Guduvancheri, Tamil Nadu, India
3Professror,Department Of Electronics and Instrumentation, Faculty of Engineering and Technology,SRM University, Chennai
4Professror,Department Of Electronics and Instrumentation, Faculty of Engineering and Technology,SRM University, Chennai
5Professror,Department Of Electronics and Instrumentation, Faculty of Engineering and Technology,SRM University, Chennai
Acoustic Analysis of Mufflers with Internal Perforated Pipes
R. Anand1, M. R. SARATHCHANDRADAS2
1Sree Chitra Thirunal College of Engineering, Pappanamcode, Thiruvananthapuram, Kerala, India
2Sree Chitra Thirunal College of Engineering, Pappanamcode, Thiruvananthapuram, Kerala, India
Acoustic Energy Harvesting using Helmholtz Resonator with tapered neck
M. A. Pillai1, D. Ezhilarasi1
1Department of Instrumentation and Control Engg, National Institute of Technology Tiruchirappalli, Tamilnadu, India
Analysis of a Planar Inverted-F mobile handset Antenna with reduced radiation towards human head
C. Anandan1
1Cochin University of Science and Technology, Cochin, Kerala, INDIA
Analysis of Cost Effective Vertical Axis Wind Turbine(CEVAWT)
H. Shaikh1, A. Arjun1, R. Kumbhar2
1SVERI'S College Of Engg., Pandharpur, Maharashtra, India
[2
WIL Walchandnagar, Pandharpur, Maharashtra, India
Analysis of Flow in a Microfluidic Device: Pressure Drop, RTD and Mixing
Amol Kulkarni1
1NCL, Pune, Maharashtra, India
Carbon Nanotube based Mass Sensor using Atomic Resolution Nanomechanical Resonators
M. Roshini1, G. B. Priyanga1, K. C. Devi1
1PSG College of Technology,Coimbatore, Tamil Nadu,India
CFD Analysis of microchannel heat sink with elliptical pin fins using COMSOL Multiphysics®
S. Jadhav1, P. M. Pawar1
SVERI College of Engineering,Pandharpur, Solapur, Maharashtra, India
Commercial Special Fibers for Sensing Applications
G. Latha1, P. Nair1
SSN College of Engineering, ain Road,anna Nagar, Chennai, Tamil Nadu, India
Computational Fluid Dynamics (CFD) Simulation of Multiphase Flow in Biogas Digester
V. S. Kshirsagar1, P. M. Pawar1
1Department of Civil Engineering, SVERI’s College of Engineering, Pandharpur, Solapur, Maharastra, India
COMSOL Multiphysics® Modelling for Li-ion Battery Ageing
P. Singh1, Neeta Khare2, P.K. Chaturvedi3
1Banasthali University, Banasthali, Rajasthan, India
2EOS Energy Storage, 214, Fernwood Avenue, Edison, NJ, USA
3SRM University, Ghaziabad,Uttar Pardesh, India
Design and analysis of micromixer for enhancing its mixing performance
S. Ghadge1, N. Misal1, A. Shinde1
1Sveris college of engineering,Pandharpur, Maharashtra, India
Design and Characterization of MOEMS Optical Tweezers
J. A. Andrews1, R. Chaubey1, G. Dwivedi1, V. Dwivedi1, N. Sagar1
1National MEMS Design Center, Department of Applied Physics, Shri G S Institute of Technology & Science, Indore, MP India
Design and Multiphysics Analysis of MEMS Capacitive Microphone
N. J. Krishnapriya, M. R. Baiju
1National MEMS Design Centre, Electronics and Communication Department, College Of Engineering Trivandrum,KERALA,INDIA
Design and Optimization of cholesterol biosensor
N. M. Sundaram1, M. Alagappan1
1PSG College of Technology Coimbatore, Tamil Nadu India
Design and simulation of heat analysis of magnetic nanoparticles by external magnetic field for hyperthermia and biomedical applications
N.M. Sundaram1, M. Sneha1, R. Sakthi Vishnu1, M. Alagappan1
1Biomedical Engineering, PSG College of Technology Coimbatore, Tamil Nadu, India
Design and Strain Analysis of Artificial Femoral Head & Stem
N. M. Sundaram1, R. Nithya2, M. Sneha1, A. Kandaswamy1
1Department of Biomedical Engineering, PSG College of Technology, Coimbatore 641004
2Department of Biomedical Engineering, Dr N G P Institute of Technology, Coimbatore 641048
Design and Validation of Micro-pump with Various Viscoelastic Diaphragm Configurations
S .J. Shinde1, P.M. Pawar1
1SVERI's College of engineering, Pandharpur,Maharashtra, India
Design of a Ultra -low Pressure Sensor
P. M. Singru .1, P. Patil1
1BITS PILANI K.K. BIRLA GOA, India
Design of MEMS based 4-Bit Shift Register
V. B. MATH1, B. G. SHEEPARAMATTI1, A. C. KATAGERI1
1 BASAVESHWAR ENGINEERING COLLEGE, BAGALKOT-587102, KARNATAKA, INDIA
Design, Fabrication & Simulation of Microchannel Network for MEMS
V. Jain1, A. K. Sharma2, P. Kumar2
1Thapar University, Patiala, Punjab, India
2Indian Institute of Technology, Roorkee, India
Determination of the Fundamental Resonant Modes of a Polysilicon H-Beam using COMSOL Multiphysics®
T. THOMAS1, M. SUNDARAM1, R. BEJGAM2
1BITS, Pilani Campus, Vidya Vihar, Pilani, Rajasthan, India
2BITS, Pilani Campus, Vidya Vihar, Pilani, Rajasthan, India
Dispersion analysis in coaxial cables at high frequencies.
S. C. Hegde1
VIT University,Vellore,Tamil Nadu, India
Dynamic simulation of interface shapes during chemical vapor deposition
J.V. Jayaramakrishna 1, S. K. Thamida1
1National Institute of Technology, Warangal, Andhra Pradesh, India
Electrowetting and Droplet Transport in Digital Microfluidic Chips for Mixing Applications
S. F. Azam1
1IIT Hyderabad, Hyderabad, Telangana, INDIA
Extraction of COM Parameters and Quality Factor of One Port SAW Resonator using FEM Based Simulation
A. K. Namdeo1, H. B. Nemade1
1Department of Electronics and Electrical Engineering, Indian Institute of Technology Guwahati, Guwahati, India
fabrication and analysis of microchamber
D. Shinde1, N. D. Misal2
1Sveris college of engineering,Pandharpur, Maharashtra, India
2Sveris college of engineering,Pandharpur, Maharashtra, India
Investigation on MEMS based Thermal Sensor for Cancer Detection
A. V. lakshmi1, K. C. devi1
1PSG College of Technology,Coimbatore,Tamilnadu,India
Low Cost All Optical Swept Source for Optical Communication Applications
Joseph Thomas Andrews1, Sonam Chaurasiya1, Om Prakash Chaudhary1, Deeksha Agarwal1
1National MEMS Design, Department of Applied Physics, Shri G S Institute of Technology & Science, Indore MP, India
MEMS Based Silicon Load cell for weighing applications
D. Chauhan1, B. D. Pant2
1Electronic Science Department, Kurukshetra University, Kurukshetra, Haryana, India
2MEMS & Microsensors Group, CSIR-CEERI, Pilani, Rajsthan, India
MEMS based Tactile Sensors for Robotic Surgery
V. Nivethitha1, S. P. Rakavi1, K.C. Devi1
1PSG College Of Technology, Coimbatore, TamilNadu, India.
Modeling and Simulation of High Sensitivity CMOS Pressure Sensor Using Free Boundary Circular Diaphragm embedded on Ring Channel Shaped MOSFET.
S. Joy1, T. Tom1
1Rajagiri School of Engineering and Technology,Kochi,Kerala,India
Modelling of Rotating Magnetic Field Eddy current probe for inspection of tubular metallic components
T. V. Shyam1, B. S. V. G. Sharma1, K. Madhusoodanan1
1Bhabha Atomic Research Centre, Mumbai, Maharashtra, India
Modelling and Simulation of MR Dampers using COMSOL Multiphysics®
Y. M. Khedkar1, S. B. Joshi2, P. M. Pawar3, B. P. Ronge4
1Mechanical Engineering Department, SVERI's College of Engineering,Pandharpur, District Solapur, Maharashtra, India
2Brahmdevdada Mane Polytechnic,Belati, Solapur, Maharashtra, India
3 SVERI's College of Engineering, Pandharpur, District Solapur, Maharashtra, India
4 SVERI's College of Engineering,Pandharpur, District Solapur, Maharashtra, India
Optimization and Simulation of MEMS based Thermal Sensor for Performance of Transformer Oil
V. Vijayalakshmi1, K. C. Devi1
1PSG College of Technology, Coimbatore, Tamilnadu, India
Optimum design for Magneto rheological Brake using COMSOL Multiphysics®
J. Thanikachalam1, P. Nagaraj2
1Department of Mechanical Engineering, Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India
2 Department of Mechanical Engineering, Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India
Prediction of temperature and thermal stress in plasma sprayed coatings
M. Raja , G. Hiremath, K. Ramachandran, P.V.A. Padmanabhan, T.K. Thiyagarajan4
1Karunya University, Coimbatore, Tamil Nadu, India
2Karunya University, Coimbatore, Tamil Nadu, India
3Bharathiar University, Coimbatore, Tamil Nadu, India
4L & PT Division, Bhabha Atomic Research Centre, Mumbai, Maharashtra, India
Simulation of Cellular Traction Force based Deflection of PDMS Micropillars
J. Wala, D. Maji, S. Dhara, S. Das
1School of Medical Science and Technology, Indian Institute of Technology Kharagpur, West Bengal, India
Simulation of Fluid Flow Through 2D Micropumps Using Fluid Structure Interaction
R. R. Gidde1, P. M. Pawar1, R. Balasubramaniam2
1SVERI's College of Engineering, Pandharpur, Maharashtra, India
2Bhabha Atomic Research Centre (BARC) , Mumbai, Maharashtra, India
Simulation of MEMS based Pressure Sensor for Diagnosing Sleep Disorder
J. Vijitha, S. Shiva Priya, K.C. Devi
1PSG College of Technology, Coimbatore, Tamilnadu, India
Study Of Pull-in Voltage In MEMS Actuators
P. D. Hanasi1, B. G. Sheeparamatti1, B. B. Kirankumar 1
1Basaveshwar Engineering College Bagalkot 587102, Karnataka, India
Surface Acoustic Wave based MEMS Resonator
S .DIXIT, R. C. JAIN
1JIIT ,NOIDA, U.P, INDIA
Thermal Simulation of FCBGA Package with Heat Sink
M. R. Naik1
1NMIT, Govindpura, Gollahalli, Yelahanaka, Bengaluru, Karnataka, India
Trapping DNA Molecules in Fluids Using Electrokinetic Effects Generated by Different Electrode Geometries
S. Ghonge 1, S. Kapur 2, S. Banerjee 1
1 Department of Physics, Birla Institute of Technology and Science, Pilani, Hyderabad Campus, Andhra Pradesh, India.
2 Department of Biological Sciences, Birla Institute of Technology and Science, Pilani, Hyderabad Campus, Andhra Pradesh, India.
Vibration Analysis of Rectangular perforated plates by COMSOL Multiphysics®
B.Raghavendra1
1 SRM University & BITS Pilani University, Chennai, Tamil Nadu, India

RF, Optics, Photonics, Semiconductors

Thursday, November 13, 4:00pm - 5:00pm
Room: Boulaingerie
Design of RF Power Couplers for Accelerator Cavities
R. Kumar, P. Singh
Bhabha Atomic Research Centre, Mumbai, Maharashtra, India
NUMERICAL MODELING OF P-i-N SOLAR CELL
J.J.Mahakud1, D. Sengupta1
1Institute Of Technical Education & Research, Sikhya O Anusandhan University, Bhubaneswar, Odisha
Plasmonics based Keys for image encryption that uses exclusive OR logic operation
N. K. Nishchal1, Areeba Fatima1, Isha Mehra1, Dhirendra Kumar1
1Indian Institute of Technology Patna
Temperature and Acceleration Sensitivities of a Dual Cavity Fabry-Perot Interferometer
R. K. Banyal
Indian Institute of Astrophysics, Bengaluru, Karnataka, India

Structual Mechanics

Friday, November 14, 10:45am - 12:15pm
Room: Boulaingerie
Effects of Solvers on Finite Element Analysis in COMSOL Multiphysics®
C. Ravi
Siemens Technology and Services Private Limited, Bengaluru, Karnataka, India
Finite Element Modeling and Simulation of Impact Velocity during Magnetic Pulse Welding
A. Kapil, A. Sharma
Indian Institute of Technology Hyderabad, Hyderabad, Telangana, India
Fluid Structure Interaction (FSI) of Double Curvature Arch Dam under seismic loading by the application of Added mass technique and Acoustic Elements.
R.MANIKANDAN1, PARBIN SULTANA2
1National Institute of Technology-Silchar,ASSAM,INDIA
2Assistant Professor,National Institute of Technology-Silchar,ASSAM,INDIA
On the geometric nonlinearity effects of polymeric plates on structural performance
Kiran.Vakkund1, RajC.Thiagarajan1
1ATOA SCIENTIFIC TECHNOLOGIES PVT LTD, 204 Regent Prime, 48 Whitefield Main Road, Whitefield, Bangalore 560066, India.
Utilization of COMSOL Multiphysics® Java API for the Integration of Composite Material Module with a Customized User Interface
R. Malav
Indian Institute of Technology Madras, Chennai, Tamil Nadu, India

GOLD SPONSORS

    
ATOA Scientific Technologies Continuum Blue Cycloid System Private Limit    
    

SILVER SPONSORS

    
Noumenon Multiphysics
    

MEDIA SPONSORS

    
Auto Tech Review DailyCADCAM Design World IOP Publishing
EM      
Privacy Policy Trademarks Contact