Program

COMSOL Conference User Presentations

User Presentations

Over 150 presentations on multiphysics simulation will be given at the conference by our users. By attending these sessions, you can connect with your colleagues and learn from their experience using COMSOL Multiphysics. The program includes moderated user presentation sessions and a grand poster session.

Proceedings

Acoustics and Vibrations

Thursday, October 9, 1:00pm - 2:30pm
Room: Commonwealth Ballroom 1
Moderator: Sushil Bharatan, Invensense Inc
Modal Analysis of Functionally-Graded Metal-Ceramic Composite Plates
E. Gutierrez-Miravete1, W. L. Saunders II2, K. Pendley3
1Rensselaer at Hartford, Hartford, CT, USA
2General Dynamics Electric Boat, Groton, CT, USA
3United Technologies - Pratt & Whitney, East Hartford, CT, USA
An Improved Loudspeaker Frequency Response by Using a Structure of Rigid Absorptive Panel in a Vented Cabinet
R. Balistreri1
1Community Light & Sound Inc., Chester, PA, USA
COMSOL Multiphysics® Simulation of Ultrasonic Energy in Cleaning Tanks
L. Zhong1
1Seagate Technology, Bloomington, MN, USA
Characterization of the Process of Ultrasound Driven Dispersion of Nanoparticles in High Viscosity Liquids
P. Pasumarty1, H. Choi1
1Clemson University, Clemson, SC, USA
Understanding Logging-While-Drilling Transducers with COMSOL Multiphysics® Software
R. Jiang1, L. Mei1, X. Liu2, H. Li2, Q. Zhang1
1The Pennsylvania State University, University Park, PA, USA
2China Oilfield Services Limited, Yanshan, Hebei, China
Simulation of a New PZT Energy Harvester with a Lower Resonance Frequency Using COMSOL Multiphysics® Software
H. Elbahr1, T. Ali1,2, A. Badawi1, S. Sedky1
1Zewail City of Science and Technology - Cairo, Cairo, Egypt
2Cairo University, Cairo, Egypt

Batteries and Fuel Cells

Thursday, October 9, 1:00pm - 2:30pm
Room: Salon F
Moderator: Badri Ramamurthi, GE Global Research Center
CFD Modeling and Analysis of a Planar Anode Supported Intermediate Temperature Solid Oxide Fuel Cell
N. Lemcoff1, M. Tweedie2
1Rensselaer Polytechnic Institute Hartford, Hartford, CT, USA
2Enthone, West Haven, CT, USA
A Single Particle Thermal Model for Lithium Ion Batteries
R. Painter1, S. Berryhill1, L. Sharpe1, S. K. Hargrove1
1Tennessee State University, Nashville, TN, USA
Topology Optimization of Lithium-Ion Battery Electrode Microstructure Morphology for Reduction of Damage Accumulation and Longevity of Battery Life
P. Clarke1, R. Abedi1
1University of Tennessee Space Institute, Tullahoma, TN, USA
Impact of Electrode Surface/Volume Ratio on Li-ion Battery Performance
S. Das1, J. Li2, R. Hui1
1University of Kansas, Lawrence, KS, USA
2Kansas State University, Manhattan, KS, USA

Bioscience and Bioengineering

Thursday, October 9, 1:00pm - 2:30pm
Room: Commonwealth Ballroom 4
Moderator: Steven Conrad, Louisiana State University Health
Blood Flow Patterns in a Patient Specific Right Coronary Artery with Multiple Stenoses
B. Liu1
1Department of Mathematics, Monmouth University, West Long Branch, NJ, USA
Simulations of Heat and Mass Transport during Biomass Conversion Processes Using 3D Biomass Particle Models with Resolved Microstructure
P. N. Ciesielski1, D. Robichaud1, M. Nimlos1, B. Donohoe1, M. Crowley1, T. Foust1
1National Renewable Energy Labratory, Golden, Colorado, USA
Updated Results of Singlet Oxygen Modeling Incorporating Local Vascular Diffusion for PDT
R. Penjweini1, M. M. Kim1, T. C. Zhu1
1Department of Radiation Oncology, University of Pennsylvania, Philadelphia, PA
Computational Model to Analyze the Failure of Arterial Function Recovery After Surgical Revascularization due to Micro-Vascular Dysfunction
K. Cluff1, H. Mehraein1, B. Jayakumar2
1Bioengineering, Wichita State University, Wichita, KS, USA
2Industrial and Manufacturing Engineering, Wichita State University, Wichita, KS, USA
Modeling of Hydrogel-Based Controlled Drug Delivery System for Breast Cancer Treatment
K. Cluff1, L. Saeeednia2, H. Mehraein 1, R. Asmatulu2
1Department of Bioengineering, Wichita State University, Wichita, KS, USA
2Department of Mechanical Engineering, Wichita State University, Wichita, KS, USA
Finite Element Modeling of Vasoreactivity Using COMSOL Multiphysics® Software
J. Parikh1, A. Kapela1, N. Tsoukias1
1Florida International University, Miami, FL, USA

CFD and Microfluidics

Thursday, October 9, 2:45pm - 4:15pm
Room: Commonwealth Ballroom 2
Moderator: Shaun Berry, MIT Lincoln Laboratory
Increasing Heat Transfer in Microchannels with SAW
S. Berry1
1MIT Lincoln Laboratory, Lexington, MA, USA
Estimation of Hydraulic Conductivity for a Heterogeneous Unsaturated Soil Using Electrical Resistivity and Level-Set Methods
T. K. Chou1, M. Chouteau1, J. S. Dubé2
1École Polytechnique de Montréal, Montréal, QC, Canada
2École de Technologie Supérieure, Montréal, QC, Canada
A Dual Continuum Model for Groundwater Flow in Karst Aquifers
R. Painter1, S. Berryhill1, T. Byl1, L. Sharpe1
1Tennessee State University, Nashville, TN, USA
Fluid Leakage Across a Pressure Seal
R. P. Ruby1, G. Kulkarni2, U. Kanade1
1Noumenon Multiphysics Pvt. Ltd., Pune, Maharashtra, India
2Oneirix Engineering Laboratories Pvt. Ltd., Pune, Maharashtra, India
Simulation of Droplet Impingement on a Solid Surface by the Level Set Method
J. Hu1, R. Jia1, K. Wan2, X. Xiong3
1Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
2Mechanical and Industrial Engineering, Northeastern University, Boston, MA, USA
3Department of Electrical Engineering, University of Bridgeport, Bridgeport, CT, USA

Computational Fluid Dynamics

Thursday, October 9, 1:00pm - 2:30pm
Room: Commonwealth Ballroom 2
Moderator: Robert F. Coker, National Aeronautics and Space Administration (NASA), Marshall Space Flight Cent
A Computational Fluid Dynamics Study of Fluid Catalytic Cracking Cyclones
I. Abu-Mahfouz1, J. W. McTernan2
1Pennsylvania State University - Harrisburg, Middletown, PA, USA
2Buell Division of Fisher-Klosterman Inc., Lebanon, PA, USA
CFD Simulation of Internal Flow Field of Dual-mode Scramjet
C. Butcher1, K. Yu1
1University of Maryland, College Park, MD, USA
Comparison of Different Passive Oil-Water Mixing Schemes in a Flow Loop
A. Chaudhuri1
1Los Alamos National Lab, Los Alamos, NM, USA
Drag Fluctuations of a Fully Deployed Flow Actuator Embedded inside Turbulent Boundary Layer Flow
A. Elzawawy1
1Vaughn College of Aeronautics and Technology, Flushing, NY, USA
Study of the Process, Design, and Operating Parameters Effect on the Efficiency of the Process Mill
A. K. Farouk1
1University of Stavanger, Sandness, Rogaland, Norway

Conjugate Heat Transfer

Thursday, October 9, 2:45pm - 4:15pm
Room: Commonwealth Ballroom 3
Moderator: Layla Mayboudi, Bombardier Transportation
Baffle Design: Tube-in-Shell Electrical Gas Heaters
K. Lund1, S. Lord2
1Kurt Lund Consulting, San Diego, CA, USA
2SML Associates, Encinitas, CA, USA
Influence of Axial Conduction in the Design of a Compact Recuperator for Catalytic Combustor Based Portable Power Generation
A. N. Smith1, H. Nochetto2, C. M. Waits2
1U.S. Naval Academy, Annapolis, MD, USA
2U.S. Army Research Lab, Adelphi, MD, USA
A Computational Study on Thermal Conductivity Measurements of High Temperature Liquid Materials
X. Ye1, R. W. Hyers1
1University of Massachusetts - Amherst, Amherst, MA, USA
Numerical Investigation of Heat Transfer of Aluminum Metal Foam Subjected to Pulsating Flow
A. Bayomy1, M. Z. Saghir1
1Ryerson University, Toronto, Ontario, Canada
Heat Transfer in Crossflow Heat Exchangers for Application with Microreactors
R. Pryor1
1Pryor Knowledge Systems, Inc., Bloomfield Hills, MI, USA

Electric and Magnetic Fields

Thursday, October 9, 1:00pm - 2:30pm
Room: Charles River West
Moderator: Kris Carlson, Beth Israel Deaconess Medical Center
Finite Element Modeling of Conventional and Pulsed Eddy Current Probes for CANDU® Fuel Channel Inspection
M. Luloff1, J. Morelli1, T. W. Krause2
1Department of Physics, Engineering Physics & Astronomy, Queen's University, Kingston, ON, Canada
2Department of Physics, Royal Military College of Canada, Kingston, ON, Canada
Use of FEM in the Design of an HTS Insert Coil for a High Field NMR Magnet
E. Bosque1
1Applied Superconductivity Center, National High Magnetic Field Laboratory, Tallahassee, FL, USA
Prediction of Magnetic Fields, Eddy Currents, and Loads in a Tokamak During a Disruption for Alcator C-Mod’s Advanced Outer Divertor
J. Doody1, B. Lipschultz2, R. Granetz1, W. Beck1, L. Zhou1, J. Irby1
1Massachusetts Institute of Technology, Plasma Science and Fusion Center, Cambridge, MA, USA
2York Plasma Institute, University of York, Heslington, York, UK
Simulation of Normal and Cancerous T-cell Membrane Electroporation
O. Henao1, V. Gómez1, I. De la Pava1, J. Sánchez1
1Grupo Fisiología Celular y Aplicada, Universidad Tecnológica de Pereira, Pereira, Risaralda, Colombia
Conductivity Estimation of Breast Cancer Using Microwave Imaging and Frechet Mean Estimate of Covariance
A. Jeremic1, E. Khoshrowshahli2
1Electrical & Computer Engineering, McMaster University, Hamilton, ON, Canada
2Biomedical Engineering, McMaster University, Hamilton, ON, Canada
Magnetorheological Fluid Based Braking System Using L-shaped Disks
M. Hajiyan1, S. Mahmud1, H. Abdullah1
1University of Guelph, Guelph, Ontario, Canada

Electromagnetic Heating

Thursday, October 9, 2:45pm - 4:15pm
Room: Charles River West
Electric Resistance Welding Process in Tube Manufacturing: Comparison Between a Numerical Model and a Set of Plant Trials
C. Cincunegui1, P. Marino1, D. Tieppo1, E. Martinez1
1Tenaris, Campana, Buenos Aires, Argentina
Strong Localization and Rapid Time Scales of Superheating and in Solid-State Nanopores
E. Levine1, G. Nagashima1, D. Hoogerheide1, M. Burns2, J. Golovchenko1
1Harvard University, Cambridge, MA, USA
2Rowland Institute at Harvard University, Cambridge, MA, USA
Modeling the Effect of Headspace Steam on Microwave Heating of Mashed Potato
J. Chen1, K. Pitchai1, D. Jones1, J. Subbiah1
1University of Nebraska-Lincoln, Lincoln, NE, USA
Microwave Exposure System for In Vitro and In Vivo Studies
C. Nadovich1, 2, W. D. Jemison2, J. A. Stoute3, C. Spadafora4
1Lafayette College, Easton, PA, USA
2Clarkson University, Potsdam, NY, USA
3Pennsylvania State University, Hershey, PA, USA
4INDICASAT AIP, Ciudad del Saber, Panama

Multiphysics Model of an Impedance Heating System
A. Daouk1, H. Saari1, O. E. Petel1
1Carleton University, Ottawa, ON, Canada

Flow in Porous Media

Thursday, October 9, 2:45pm - 4:15pm
Room: Salon F
Moderator: James Knox, NASA
Advancements in Carbon Dioxide and Water Vapor Separations Using COMSOL Multiphysics® Software
J. Knox1, R. F. Coker1, C. F. Gomez1, R. Schunk1, R. Cummings1
1NASA Marshall Space Flight Center, Huntsville, AL, USA
An Approach to Modeling Vacuum Desorption
C. F. Gomez1, R. Schunk1, R. Coker1, J. Knox1
1NASA Marshall Space Flight Center, Huntsville, AL, USA
Boundary Value Effects on Migration Patterns in Hydraulically Fractured Shale Formations
T. Aseeperi1
1Ralph. E Martin Department of Chemical Engineering, University of Arkansas, Fayetteville, AR, USA
Numerical Study of Flux Models for CO2 - Enhanced Natural Gas Recovery and Potential CO2 Storage in Shale Gas Reservoirs
N. Prajapati1, P. Mills1
1Texas A&M University - Kingsville, Kingsville, TX, USA
Full System Modeling and Validation of the Carbon Dioxide Removal Assembly
R. Coker1, J. Knox1
1NASA Marshall Space Flight Center, Huntsville, AL, USA
Direct Modeling of Packed Bed Channeling
R. Schunk1, J. Knox1, R. Coker1
1NASA Marshall Space Flight Center, Huntsville, AL, USA

Heat Transfer and Phase Change

Thursday, October 9, 1:00pm - 2:30pm
Room: Commonwealth Ballroom 3
Moderator: Ron Tosh, NIST
Design of a Counter Flow Plate Fin Heat Exchanger
R. Jia1, J. Hu1, X. Xiong2
1Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
2Department of Electrical and Computer Engineering, University of Bridgeport, Bridgeport, CT, USA
Design of an Automated Thermal Cycler for Long-term Phase Change Material Phase Transition Stability Studies
D. Groulx1, A. C. Kheirabadi1
1Mechanical Engineering, Dalhousie University, Halifax, Nova Scotia, Canada
Heat Transfer for Manganin Shunt Resistors in Metering Applications
S. N. Misti1, M. Birkett1, D. Bell1, R. Penlington1
1Northumbria University, Newcastle upon Tyne, Tyne and Wear, UK
Thermal Analysis of Additive Manufacturing
S. Yushanov1, J. S. Crompton1, K. C. Koppenhoefer1
1AltaSim Technologies, LLC, Columbus, OH, USA
Thermal Modeling in a Historical Building – Improving Thermal Comfort Through the Siting of a Passive Mass of Phase Change Material
D. Groulx1, F. Herbinger1, L. Desgrosseilliers1
1Mechanical Engineering, Dalhousie University, Halifax, Nova Scotia, Canada
Verification of the Numerical Simulation of Permafrost Using COMSOL Multiphysics® Software
E. Dagher1, G. Su1, T. S. Nguyen1
1Canadian Nuclear Safety Commission, Ottawa, ON, Canada

MEMS and Microfluidics

Thursday, October 9, 1:00pm - 2:30pm
Room: Salon G
Moderator: Stephen Bart, MKS Instruments, Inc.
Design and Simulation of High-Throughput Microfluidic Droplet Dispenser for Lab-on-a-Chip Applications
C. Jin1, X. Xiong2, P. Patra1, R. Zhu1, J. Hu3
1Department of Biomedical Engineering, University of Bridgeport, Bridgeport, CT, USA
2Department of Electrical and Computer Engineering, University of Bridgeport, Bridgeport, CT, USA
3Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
Digital Microfluidic Droplet Adapter for Interconnection of Biochips
R. Zhu1, X. Xiong2, P. Patra1, C. Jin1, Junling Hu3
1Department of Biomedical Engineering, University of Bridgeport, Bridgeport, CT, USA
2Department of Electrical and Computer Engineering, University of Bridgeport, Bridgeport, CT, USA
3Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
Effect of Substrate Contact Angle on Ink Transfer in Flexographic Printing
F. E. Hizir1, D. E. Hardt1
1Massachusetts Institute of Technology, Cambridge, MA, USA
Simulation of Gravity-Driven Flow through a Microfluidic Device on a Rocker Platform
B. Srinivasan1, J. Hickman1, M. Shuler2
1University of Central Florida, Orlando, FL, USA
2Cornell University, Ithaca, NY, USA
Simulation of Mass Transfer in a Microfluidic Experiment Using the Moving Mesh Method
K. Weisbrod1, R. Roberts1, R. Chamberlin1, S. Yarbro1
1Los Alamos National Lab, Los Alamos, NM, USA
Simulations of Micropumps Based on Tilted Flexible Structures
M. J. Hancock1, N. H. Elabbasi1, M. C. Demirel2
1Veryst Engineering, LLC, Needham, MA, USA
2The Pennsylvania State University, University Park, PA, USA

MEMS and Nanotechnology

Thursday, October 9, 2:45pm - 4:15pm
Room: Salon G
CVD Graphene Growth Mechanism on Nickel Thin Films
K. Al-Shurman1, H. Naseem2
1The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
2Department of Electrical Engineering, University of Arkansas, Fayetteville, AR, USA
FEM Correlation and Shock Analysis of a VNC MEMS Mirror Segment
E. Aguayo1
1Newton, LLC, Bowie, MD, USA
Finite Element Analysis of Transient Ballistic-Diffusive Heat Transfer in Multi-Dimensional Structures
S. Hamian1, T. Yamada2, M. Faghri3, K. Park1
1University of Utah, Salt Lake City, UT, USA
2Lund University, Lund, Sweden
3University of Rhode Island, Kingston, RI, USA
Modeling and Simulation of Dual Application Capacitive MEMS Sensor
A. Ravi1, R. Krishna1, J. Christen1
1Arizona State University, Tempe, AZ, USA
Platform Isolation Using Out-of-Plane Complaint Mechanisms
A. Arevalo1, E. Rawashdeh1, I. G. Foulds2
1Computer, Electrical & Mathematical Sciences & Engineering Division (CEMSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
2School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada
Simulation of a Polyimide Based Micromirror
A. Arevalo1, S. Ilyas2, M. I. Younis2, I. G. Foulds3
1Computer, Electrical & Mathematical Sciences & Engineering Division (CEMSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
2Physical Sciences & Engineering (PSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
3University of British Columbia, Vancouver, BC, Canada

Multiphysics I

Thursday, October 9, 1:00pm - 2:30pm
Room: Charles River East
Moderator: Greg Sowa, Graftech
Evaluation of Novel Wing Design for UAV
P. K. Bahumanyam1
1University of Alabama in Huntsville, Huntsville, AL, USA
Implementation of a Viscoelastic Material Model to Simulate Relaxation in Glass Transition
Z. Zheng1, R. Zhang1
1Corning Incorporated, Corning, NY, USA
Modeling Flow and Deformation During Salt-Assisted Puffing of Single Rice Kernels
T. Gulati1, A. K. Datta1
1Cornell University, Ithaca, NY, USA
Simulating Wear in Disc Brakes
N. H. Elabbasi1, M. J. Hancock1, S. B. Brown1
1Veryst Engineering, LLC, Needham, MA, USA
Structural Optimization AISHa Ion Source
F. Noto1, M. Piscopo1, L. Celona1, D. Cittadino1, S. Gammino1, G. Cuttone1, G. Gallo1, G. Schillaci1, C. Campisano2, L. Lo Nigro3, G. Costa3, A. Campisano4
1Laboratorio Nazionale del Sud, Santa Sofia, Catania, Italy
2Gravina di Catania, Sicily, Italy
3Trinacria, Canalicchio, Catania, Italy
4Unico Informatica, li Battiati, Catania, Italy
Thermal-Electrical Study of an Ultra-fast Disconnect Switch with a Piezoelectric Actuator
L. Graber1, C. Widener1, S. Smith1, M. Steurer1
1Center for Advanced Power Systems (CAPS), Florida State University, Tallahassee, FL, USA

Multiphysics II

Thursday, October 9, 2:45pm - 4:15pm
Room: Charles River East
Moderator: Raghunathan Kuppuswamy, General Motors
COMSOL Multiphysics® Simulations of Graphene Chemical Vapor Deposition (CVD) Growth
K. M. Al-shurman1, H. Naseem1
1The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
Thermal Study of Valve Regulated Lead Acid Batteries and Electronics Chamber Used in Stand-Alone Street Lighting Applications
D. Groulx1, J. Skaalum1, T. Jamieson1
1Mechanical Engineering, Dalhousie University, Halifax, NS, Canada
Calibration of a Geothermal Energy Pile Model
R. Caulk1, J. McCartney2, E. Ghazanfari1
1University of Vermont, Burlington, VT, USA
2University of Colorado, Boulder, CO, USA
Modeling of Oligomerization of Ethylene in a Falling Film Reactor for the Production of Linear Alpha Olefins
A. A. Mohammed1, S. K. Fateen1, T. S. Ahmed1, T. M. Moustafa1
1Department of Chemical Engineering, Cairo University, Giza, Egypt
Optimization Module Enables Hybrid Experimental-Numerical Algorithm for 3D Particle Image Velocimetry
M. Sigurdson1, C. Meinhart1, I. Mezic1
1UC Santa Barbara, Santa Barbara, CA, USA
Effect of a High Frequency Field on the Electric Double Layer Surrounding a Biomolecule in a Fluid
M. Riou1, C. Maedler1, S. Erramilli1, P. Mohanty1
1Boston University, Boston, MA, USA

Optics, Photonics, & Semiconductors

Thursday, October 9, 1:00pm - 2:30pm
Room: Salon H
Antenna and Plasmonic Properties of Scanning Probe Tips at Optical and Terahertz Regimes
A. Haidary1, P. Grütter1, Y. Miyahara 1
1McGill University, Montreal, QC, Canada
Methods to Optimize Plasmonic Structure Integrated Single-Photon Detector Designs
M. Csete1, G. Szekeres1, B. Banhelyi2, A. Szenes1, T. Csendes2, G. Szabo1
1Department of Optics and Quantum Electronics, University of Szeged, Szeged, Hungary
2Department of Computational Optimization, University of Szeged, Szeged, Hungary
Numerical Simulation of Thermal Runaway in a THz GaAs Photoconductor
S. Sarodia1,2, W. Zhang2, E. Brown2
1Centerville High School, Dayton, OH, USA
2Wright State University, Dayton, OH, USA
Optimized Nano-Structure of a Si Solar Cell for Enhanced Carrier Collection Using the Semiconductor Module
N. M. Mangan1, E. Johlin1, J. P. Mailoa1, J. C. Grossman1, T. Buonassisi1
1Massachusetts Institute of Technology, Cambridge, MA, USA
Periodically Poled Lithium Niobate Waveguides for Quantum Frequency Conversion
J. Toney1, J. Retz1, V. Stenger1, A. Pollick1, P. Pontius1, S. Sriram1
1SRICO, Inc., Columbus, OH, USA

RF and Microwave Engineering

Thursday, October 9, 2:45pm - 4:15pm
Room: Salon H
Moderator: Jose Ernesto Rayas-Sanchez, ITESO
A Design-of-Experiments Approach to FEM Uncertainty Analysis for Optimizing Magnetic Resonance Imaging RF Coil Design
J. T. Fong1, N. A. Heckert1, J. J. Filliben1, L. Ma1, K. F. Stupic2, K. E. Keenan2, S. E. Russek2
1NIST, Gaithersburg, MD, USA
2NIST, Boulder, CO, USA
Electromagnetic Well Logs Simulated with the COMSOL® RF Module on a Cluster
D. Swaminathan1, G. Minerbo1, K. Pathak1
1Drilling and Production Group, Schlumberger, Houston, TX, USA
FEM Analysis of Elliptical Type Coaxial Open-Ended Probe for Dielectric Measurement
H. Arab1, C. Akyel1
1Ecole Polytechnique of Montreal, Montreal, QC, Canada
Reliable Full-Wave EM Simulation of a Single-Layer SIW Interconnect with Transitions to Microstrip Lines
J. L. Chavez-Hurtado1, J. E. Rayas-Sanchez1, Z. Brito-Brito1
1ITESO - The Jesuit University of Guadalajara, Tlaquepaque, Jalisco, Mexico

Structural Mechanics

Thursday, October 9, 2:45pm - 4:15pm
Room: Commonwealth Ballroom I
Moderator: Mehdi Amiri, Technical Data Analysis Inc.
Deformation of Stamp Features with Slanted Walls During Microcontact Printing
F. E. Hizir1, D. E. Hardt1
1Massachusetts Institute of Technology, Cambridge, MA, USA
Pit to Crack Transition Modeling in Corrosion-Fatigue of Aluminum Alloys
M. Amiri1, A. Arcari1, L. Airoldi1, M. Naderi1, N. Iyyer1
1Technical Data Analysis, Inc., Falls Church, VA, USA
Sensitivity of the Compression-Softening Effect to Mesh Imperfections in Compressed Flexures
S. Saha1, A. Ramirez1, C. DiBiasio2, M. Culpepper1
1Massachusetts Institute of Technology, Cambridge, MA, USA
2Charles Stark Draper Laboratory Inc., Cambridge, MA, USA
Simulation of Microstructured Rolling-Sliding Contacts
M. Weschta1, S. Tremmel1, S. Wartzack1
1Engineering Design, Friedrich-Alexander-University Erlangen-Nürnberg (FAU), Erlangen, Bavaria, Germany
Small-Scale Yielding Models for Fracture Mechanics
K. C. Koppenhoefer1, J. Thomas1, J. S. Crompton1
1AltaSim Technologies, LLC, Columbus, OH, USA
Structural Mechanics Modeling of 3D Printed Thermoplastic Electroplated Parts
C. Herzfeld1
1SPAWAR Systems Center (SSC) ATLANTIC, Charleston, SC, USA

Transport Phenomena

Thursday, October 9, 2:45pm - 4:15pm
Room: Commonwealth Ballroom 4
Analysis of Mash Tun Flow: Recommendations for Homebrewers
E. Gutierrez-Miravete1, C. J. Walsh2
1Rensselaer at Hartford, Hartford, CT, USA
2General Dynamics-Electric Boat, Groton, CT, USA
Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions
A. Nanduri1, P. L. Mills1
1Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
Fresh Produce Safety During Hydrocooling: An Engineering Model
A. Warning1, A. Datta1
1Cornell University, Ithaca, NY, USA
H2SO4 Catalysis: Perspective and Opportunities for Reducing SO2 Emissions
P. L. Mills1, A. Nagaraj2
1Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
2Department of Environmental Engineering, Texas A&M University, Kingsville, TX, USA
Multiscale Model of Human Pathogen Growth on Fresh Produce
A. Warning1, A. Datta1
1Cornell University, Ithaca, NY, USA
Stochastic Diffusion of Calcium Ions Through a Nanopore in the Cell Membrane Created by Electroporation
O. Henao1, V. Gómez1, I. De La Pava1, J. Sánchez 1
1Grupo Fisiología Celular y Aplicada, Universidad Tecnológica de Pereira, Pereira, Risaralda, Colombia

Poster Session

Thursday, October 9, 6:00pm - 7:00pm
2D Simulation of Cardiac Tissue
S. Esfahani1
1University of South Florida, Tampa, FL, USA
3D COMSOL Multiphysics® Model of a Plate Heat Exchanger to Support a Laboratory Teaching Environment
N. Medeiros1, W. Clark1
1Worcester Polytechnic Institute, Worcester, MA, USA
3D Multiphysics Analyses to Support Low Enriched Uranium (LEU) Conversion of HFIR
P. K. Jain1, J. D. Freels1
1Oak Ridge National Laboratory, Oak Ridge, TN, USA
A CFD Analysis of the Operating Conditions of a Multitube Pd Membrane for H2 Purification
B. Castro-Dominguez1, R. Ma1, A. G. Dixon1, Y. H. Ma1
1Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, MA, USA
A Computational Study on Thermal Conductivity Measurements of High Temperature Liquid Materials
X. Ye1, R. W. Hyers1
1University of Massachusetts - Amherst, Amherst, MA, USA
A Three Dimensional (3D) Thermo-Hydro-Mechanical Model for Microwave Drying
T. Gulati1, H. Zhu1, A. K. Datta1
1Department of Biological & Environmental Engineering, Cornell University, Ithaca, NY, USA
AC Electrothermal Characterization of Doped-Si Heated Microcantilevers Using Frequency-Domain Finite Element Analysis
K. Park1, S. Hamian1, A. M. Gauffreau2, T. Walsh2
1Mechanical Engineering Department, University of Utah, Salt Lake City, UT, USA
2Department of Mechanical, Industrial & Systems Engineering, University of Rhode Island, Kingston, RI, USA
An Improved Loudspeaker Frequency Response by Using a Structure of Rigid Absorptive Panel in a Vented Cabinet
R. Balistreri1
1Community Light & Sound Inc., Chester, PA, USA
Analysis of Heat Transfer in a Complex Three Dimensional Structure Fabricated by Additive Manufacturing
C. Settle1, K. Hoshino1
1Biomedical Engineering Department, University of Connecticut, Storrs, CT, USA
Antenna and Plasmonic Properties of Scanning Probe Tips at Optical and Terahertz Regimes
A. Haidary1, P. Grütter1, Y. Miyahara 1
1McGill University, Montreal, QC, Canada
Biofluid–Structural Interaction in Abdominal Aortic Aneurysm for Predicting Timeline to Rupture: The Effect of Hypertension and Aorta Wall Material Properties
K. Cluff1, H. Mehraein1, G. Jayakumar2
1Bioengineering, Wichita State University, Wichita, KS, USA
2Industrial and Manufacturing Engineering, Wichita State University, Wichita, KS, USA
Boundary Value Effects on Migration Patterns in Hydraulically Fractured Shale Formations
T. Aseeperi1
1Ralph. E Martin Department of Chemical Engineering, University of Arkansas, Fayetteville, AR, USA
CFD Simulation of Internal Flow Field of Dual-mode Scramjet
C. Butcher1, K. Yu1
1University of Maryland, College Park, MD, USA
Comparison of Different Passive Oil-Water Mixing Schemes in a Flow Loop
A. Chaudhuri1
1Los Alamos National Lab, Los Alamos, NM, USA
COMSOL Multiphysics® Models Combined with Experiments to Teach PID Controller Tuning
W. Clark1
1Chemical Engineering Department, Worcester Polytechnic Institute, Worcester, MA, USA
COMSOL Multiphysics® Simulation of 3D Single-Phase Transport in a Random Packed Bed of Spheres
A. Dixon1
1Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA
COMSOL Multiphysics® Simulation of Heat Generation from Hydrogen/Deuterium Loading of Nickel Alloy Nanoparticles
G. Miley1, A. Osouf1, B. Stunkard1, T. Patel1, E. Ziehm 1, A. Krishnamurthy1, K. J. Kim1
1University of Illinois, Champaign, IL, USA
COMSOL Multiphysics® Simulations of Graphene Chemical Vapor Deposition (CVD) Growth
K. M. Al-shurman1, H. Naseem1
1The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
COMSOL Multiphysics® Software for Simulation of Surface Response to Excitation Method for Manufacturing Process Performance Monitoring
H. Fekrmandi1, N. Miniello1, R. Kiflemariam1, I. Nur Tansel1
1Mechanical & Materials Engineering Department, Florida International University, Miami, FL, USA
COMSOL Multiphysics® Software: Time-Lapse Electrical Resistivity Inversion
T. K. Chou1, M. Chouteau1, M. J. Yi2
1Department of Civil, Geological & Mining Engineering, École Polytechnique de Montréal, Montreal, QC, Canada
2Korea Institute of Geoscience and Mineral Resources, Daejeon, South Korea
Convective Cooling of Electronic Components
J. S. Crompton1, H. Singh1, K. Koppenhoefer1
1AltaSim Technologies, LLC, Columbus, OH, USA
CVD Graphene Growth Mechanism on Nickel Thin Films
K. Al-Shurman1, H. Naseem2
1The Institute for Nanoscience & Engineering, University of Arkansas, Fayetteville, AR, USA
2Department of Electrical Engineering, University of Arkansas, Fayetteville, AR, USA
Delamination of Sub-Crustal Lithosphere
P. Vincent1, E. Humphreys2
1Oregon State University, Corvallis, OR, USA
2University of Oregon, Eugene, OR, USA
Design of Multiple Ground System for Maternal Defibrillation
A. Jeremic1, E. Khoshrowshahli2
1Electrical & Computer Engineering, McMaster University, Hamilton, ON, Canada
2Biomedical Engineering, McMaster University, Hamilton, ON, Canada
Design of Precision Magnetic Fields for Fundamental Neutron Symmetries
M. Higginson-Rollins1, C. Crawford2
1Department of Electrical & Computer Engineering, University of Kentucky, Lexington, KY, USA
2Department of Physics & Astronomy, University of Kentucky, Lexington, KY, USA
Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions
A. Nanduri1, P. L. Mills1
1Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
Drag Fluctuations of a Fully Deployed Flow Actuator Embedded inside Turbulent Boundary Layer Flow
A. Elzawawy1
1Vaughn College of Aeronautics and Technology, Flushing, NY, USA
Embedded Microfluidic/Thermoelectric Generation System for Self-Cooling of Electronic Devices
R. Kiflemariam1, H. Fekramandi1, C. Lin1
1Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA
Enhanced Transient Modeling of Hybrid Photovoltaic Air (PVT) Module
R. Kiflemariam1, M. Almaz1, F. Zevallos1, C. Lin1
1Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA
Evaluation of Instability of a Low-salinity Density-dependent Flow in a Porous Medium
Y. T. Habtemichael1, R. T. Kiflemariam2, H. R. Fuentes1
1Department of Civil and Environmental Engineering, Florida International University, Miami, FL, USA
2Department of Mechanical and Materials Engineering, Florida International University, Miami, FL, USA
Fast Biofluid Transport of High Conductive Liquids Using AC Electrothermal Phenomenon, A Study on Substrate Characteristics
A. Salari1, C. Dalton1
1University of Calgary, Calgary, AB, Canada
FEM Simulation of Magnetically Triggered Hydrogel Micro Particles as Advanced Drug Carriers
O. Yassine1, M. Kavaldzhiev1, J. Kosel1, Q. Li1, A. Alfadhel1, A. Zaher1
1Electrical Engineering Division, CEMSE Group, King Abdullah University of Science and Technology, Thuwal, Saudi Arabia
Finite Element Modeling for Inspection of CANDU® Steam Generators
S. G. Mokros1, P. R. Underhill2, J. Morelli1, T. W. Krause2
1Department of Physics, Engineering Physics & Astronomy, Queen's University, Kingston, ON, Canada
2Department of Physics, Royal Military College of Canada, Kingston, ON, Canada
Finite Element Modeling of Conventional and Pulsed Eddy Current Probes for CANDU® Fuel Channel Inspection
M. Luloff1, J. Morelli1, T. W. Krause2
1Department of Physics, Engineering Physics & Astronomy, Queen's University, Kingston, ON, Canada
2Department of Physics, Royal Military College of Canada, Kingston, ON, Canada
Finite Element Modeling of Vasoreactivity Using COMSOL Multiphysics® Software
J. Parikh1, A. Kapela1, N. Tsoukias1
1Florida International University, Miami, FL, USA
Flow Focusing Droplet Generation Using Linear Vibration
A. Salari1, C. Dalton1
1Department of Electrical & Computer Engineering, University of Calgary, Calgary, AB, Canada
Fluid Leakage Across a Pressure Seal
R. P. Ruby1, G. Kulkarni2, U. Kanade1
1Noumenon Multiphysics Pvt. Ltd., Pune, Maharashtra, India
2Oneirix Engineering Laboratories Pvt. Ltd., Pune, Maharashtra, India
Fresh Produce Safety During Hydrocooling: An Engineering Model
A. Warning1, A. Datta1
1Cornell University, Ithaca, NY, USA
Generating Simulated Data for Spot Heating/IR Camera Analysis of Coal Slag Surfaces
M. Silva1, T. Ring1
1Department of Chemical Engineering, University of Utah, Salt Lake City, UT, USA
Geomagnetic Modeling with COMSOL Multiphysics® Software
G. Ha1, S. S. Kim1, J. H. Kim1
1Chungnam National University, Daejeon, Korea
Heat Transfer in Crossflow Heat Exchangers for Application with Microreactors
R. Pryor1
1Pryor Knowledge Systems, Inc., Bloomfield Hills, MI, USA
High Frequency Resonators Using Exotic Nano-materials
B. Panchapakesan1, M. Loeian1
1Department of Mechanical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA
Hydrophone Acoustic Receiver Modeling: Turbulent Flow Modeling and Acoustic Analysis
D. Groulx1, A. Bharath1, S. Campbell1
1Department of Mechanical Engineering, Dalhousie University, Halifax, NS, Canada
Improving Intranasal Drug Delivery to the Olfactory Region Using Magnetophoretic Guidance
J. Xi1, Z. Zhang1, X. Si2, H. Nanda3, A. Ayoola3
1Mechanical & Biomedical Engineering, Central Michigan University, Mt. Pleasant, MI, USA
2Mechanical Engineering, California Baptist University, Riverside, CA, USA
3Calvin College, Grand Rapids, MI, USA
Magnetorheological Fluid Based Braking System Using L-shaped Disks
M. Hajiyan1, S. Mahmud1, H. Abdullah1
1University of Guelph, Guelph, Ontario, Canada
Magnetostatic-Magnon Sensors for Microwave Microscopy of Biological Structures
E. Hollander1, E. O. Kamenetskii1, R. Shavit1
1Microwave Magnetic Laboratory, Department of Electrical and Computer Engineering, Ben Gurion University of the Negev, Beer Sheva, Israel
Mean Flow Augmented Acoustics in Rocket Systems
S. Fischbach1
1NASA Marshall Space Flight Center / Jacobs ESSSA Group, Huntsville, AL, USA
Modeling Flow and Deformation During Salt-Assisted Puffing of Single Rice Kernels
T. Gulati1, A. K. Datta1
1Cornell University, Ithaca, NY, USA
Modeling Heat and Moisture Transport During Hydration of Cement-Based Materials in Semi-Adiabatic Conditions
E. Hernandez-Bautista1,2, D. Bentz1, S. Sandoval-Torres2, P. Cano-Barrita2
1National Institute of Standards and Technology, Gaithersburg, MD, USA
2Instituto Politécnico Nacional/CIIDIR Unidad Oaxaca, Oaxaca, México
Modeling Integrated Thermoelectric Generator-Photovoltaic Thermal (TEG-PVT) System
R. Kiflemariam1, M. Almaz1, C. Lin1
1Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA
Modeling Mechanical Property Changes During Heating of Carrot Tissue - A Microscale Approach
S. Kadam1, A. K. Datta1
1Department of Biological & Environmental Engineering, Cornell University, Ithaca, NY, USA
Modeling of a Multilayered Propellant Extrusion in Concentric Cylinders
S. Durand1,3, C. Dubois1, P. Lafleur1, V. Panchal2, D. Park2, D. Lepage3, P. Paradis3
1École Polytechnique de Montréal, Montréal, QC, Canada
2US Army ARDEC, Picatinny Arsenal, NJ, USA
3General Dynamics OTS Canada Valleyfield, Valleyfield, QC, Canada
Modeling of Asphaltenes and Oil Shale Pyrolysis
J. P. Mmbaga1, F. Munoz2, S. Dhir1, R. Gupta1, R. E. Hayes1, M. Toledo2
1University of Alberta, Edmonton, AB, Canada
2Departamento de Ingenieria Mecanica, Universidad Tecnica Federico Santa Maria, Valparaiso, Chile
Modeling of Directional Dependence in Nanowire Flow Sensor
A. Piyadasa1,3, P. Gao1,2,3
1Department of Physics, University of Connecticut, Storrs, CT, USA
2Department of Materials Science & Engineering, University of Connecticut, Storrs, CT, USA
3Institute of Materials Sciences, University of Connecticut, Storrs, CT, USA
Modeling of Packed Bed Reactors: Hydrogen Production by the Steam Reforming of Methane and Glycerol
A. Dixon1, B. MacDonald1, A. Olm1
1Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA
Modeling the Effect of a Water Tree Inside a Tape Shield and Concentric Neutral Cables
K. Burkes1,2, E. Makram2, R. Hadidi2
1Department of Electrical Engineering, Clemson University, Clemson, SC, USA
2Savannah River National Lab, R&D Instrumentation, Aiken, SC, USA
Multiphysics: Fluid Mixing/Brine Pool Formation for Economic Geology Applications
C. Schardt1
1University of Minnesota-Duluth, Duluth, MN, USA
Multiscale Model of Human Pathogen Growth on Fresh Produce
A. Warning1, A. Datta1
1Cornell University, Ithaca, NY, USA
Numerical and Experimental Studies of a Capillary Channel
M. Xu1, Z. Wu1, X. Wang1
1Tsinghua University, Beijing, China
Numerical Measurement Method of Complex Permittivity for a Powdered Material Using a Conical Coaxial Probe
H. Arab1, C. Akyel1
1Ecole Polytechnique of Montreal, Montréal, QC, Canada
Numerical Simulation of Carbon Steel Corrosion Exposed to Flowing NaCl Solutions Through an Annular Duct
A. Soliz1, K. Mayrhofer1, L. Caceres2
1Department of Interface Chemistry & Surface Engineering, Max-Planck-Institut für Eisenforschung, Düsseldorf, Germany
2Department of Chemical Engineering, University of Antofagasta, Antofagasta, Chile
Numerical Simulation of Thermal Runaway in a THz GaAs Photoconductor
S. Sarodia1,2, W. Zhang2, E. Brown2
1Centerville High School, Dayton, OH, USA
2Wright State University, Dayton, OH, USA
Numerical Study of Flux Models for CO2 - Enhanced Natural Gas Recovery and Potential CO2 Storage in Shale Gas Reservoirs
N. Prajapati1, P. Mills1
1Texas A&M University - Kingsville, Kingsville, TX, USA
Optimization Module Enables Hybrid Experimental-Numerical Algorithm for 3D Particle Image Velocimetry
M. Sigurdson1, C. Meinhart1, I. Mezic1
1UC Santa Barbara, Santa Barbara, CA, USA
Platform Isolation Using Out-of-Plane Complaint Mechanisms
A. Arevalo1, E. Rawashdeh1, I. G. Foulds2
1Computer, Electrical & Mathematical Sciences & Engineering Division (CEMSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
2School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada
Prediction of Magnetic Fields, Eddy Currents, and Loads in a Tokamak During a Disruption for Alcator C-Mod’s Advanced Outer Divertor
J. Doody1, B. Lipschultz2, R. Granetz1, W. Beck1, L. Zhou1, J. Irby1
1Massachusetts Institute of Technology, Plasma Science and Fusion Center, Cambridge, MA, USA
2York Plasma Institute, University of York, Heslington, York, UK
Pulsed Power Accelerator Design with COMSOL Multiphysics® Software
D. Reisman1
1Sandia National Laboratories, Albuquerque, NM, USA
Simulation and Experimental Analysis of Drug Release Rates from Magnetic Nanocomposite Spheres
L. Saeeednia1, H. Mehraein2, F. Abedin1, K. Cluff2, R. Asmatulu1
1Department of Mechanical Engineering, Wichita State University, Wichita, KS, USA
2Department of Bioengineering, Wichita State University, Wichita, KS, USA
Simulation of a Polyimide Based Micromirror
A. Arevalo1, S. Ilyas2, M. I. Younis2, I. G. Foulds3
1Computer, Electrical & Mathematical Sciences & Engineering Division (CEMSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
2Physical Sciences & Engineering (PSE), King Abdullah University of Science & Technology, Thuwal, Saudi Arabia
3University of British Columbia, Vancouver, BC, Canada
Simulation of Microwave Heating of Frozen Pie
F. Chen1, T. Gulati1, H. Zhu1, A. K. Datta1
1Cornell University, Ithaca, NY, USA
Simulation of the Temperature Profile During Welding with COMSOL Multiphysics® Software Using Rosenthal's Approach
A. Lecoanet1, D. G. Ivey1, H. Henein1
1Department of Chemical & Materials Engineering, University of Alberta, Edmonton, AB, Canada
Simulations of Heat and Mass Transport during Biomass Conversion Processes Using 3D Biomass Particle Models with Resolved Microstructure
P. N. Ciesielski1, D. Robichaud1, M. Nimlos1, B. Donohoe1, M. Crowley1, T. Foust1
1National Renewable Energy Labratory, Golden, Colorado, USA
Solving Calcium Spatiotemporal Diffusion Using COMSOL Multiphysics® Software
L. Garber1,2, G. S. B. Williams2, W. J. Lederer2
1Fischell Department of Bioengineering, University of Maryland, Baltimore, MD, USA
2Center for Biomedical Engineering & Technology, University of Maryland, Baltimore, MD, USA
Static and Dynamic Deformations of a Reed Valve Immersed in Hydraulic Fluid
A. Chaudhuri1
1Los Alamos National Lab, Los Alamos, NM, USA
Structural Optimization AISHa Ion Source
F. Noto1, M. Piscopo1, L. Celona1, D. Cittadino1, S. Gammino1, G. Cuttone1, G. Gallo1, G. Schillaci1, C. Campisano2, L. Lo Nigro3, G. Costa3, A. Campisano4
1Laboratorio Nazionale del Sud, Santa Sofia, Catania, Italy
2Gravina di Catania, Sicily, Italy
3Trinacria, Canalicchio, Catania, Italy
4Unico Informatica, li Battiati, Catania, Italy
Study of the Process, Design, and Operating Parameters Effect on the Efficiency of the Process Mill
A. K. Farouk1
1University of Stavanger, Sandness, Rogaland, Norway
The Effect of Space Charge due to the Auto-Ionization of Neutral, Hydrogenic States in Point-Contact Germanium Detectors at MilliKelvin Temperatures
D. Faiez1, N. Mirabolfathi1, B. Sadoulet1, K. M. Sundqvist2
1Department of Physics, University of California, Berkeley, CA, USA
2Department of Electrical & Computer Engineering, Texas A&M University, College Station, TX, USA
The Effects of a Superparamagnetic Ground on the EMI Response of a Target
A. T. Clark1
1Research & Development, WM Robots LLC, Colmar, PA, USA
Thermal and Electrical Modeling of Carbon Heating Film for Infrared Radiation
E. Khamsehashari1, Y. Audet1
1Department of Electrical Engineering, Ecole Polytechnique de Montreal, Montreal, QC, Canada
Thermal-Electrical Study of an Ultra-fast Disconnect Switch with a Piezoelectric Actuator
L. Graber1, C. Widener1, S. Smith1, M. Steurer1
1Center for Advanced Power Systems (CAPS), Florida State University, Tallahassee, FL, USA
Transport-Kinetic Interactions for SO2 Oxidation to SO3 in Particulate and Monolith Catalysts
P. L. Mills1, A. Nagaraj2
1Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA
2Department of Environmental Engineering, Texas A&M University, Kingsville, TX, USA
Tri-Axial Square Helmholtz Coils System to Generate Uniform Magnetic Field Volume
A. F. Restrepo1, E. Franco1, C. R. Pinedo1
1Universidad del Valle, Cali, Valle del Cauca, Colombia
Tuning Sensitivity to Ectopeptidase Rates in the Rat Hippocampus Using Numerical Simulations
Y. Ou1, S. Weber1
1University of Pittsburgh, Pittsburgh, PA, USA
Understanding Logging-While-Drilling Transducers with COMSOL Multiphysics® Software
R. Jiang1, L. Mei1, X. Liu2, H. Li2, Q. Zhang1
1The Pennsylvania State University, University Park, PA, USA
2China Oilfield Services Limited, Yanshan, Hebei, China
Use of FEM in the Design of an HTS Insert Coil for a High Field NMR Magnet
E. Bosque1
1Applied Superconductivity Center, National High Magnetic Field Laboratory, Tallahassee, FL, USA

GOLD SPONSORS

    
Altasim Continuum Blue MatWeb.com Veryst Engineering  
    

SILVER SPONSORS

    
Mercury Learning and Information Microway Noumenon Multiphysics Numerical Design
Pryor Knowledge Systems Simpleware    
    

MEDIA SPONSORS

    
3D CAD Portal Chemical Engineering Progress Desktop Engineering
Design World IEEE Spectrum IOP Publishing Microwave Journal
NASA Tech Briefs Physics Today R&D  
Privacy Policy Trademarks Contact