
Acoustics and Vibrations
|
A Study into the Acoustic and Vibrational Effects of Carbon Fiber Reinforced Plastic as a Sole Manufacturing Material for Acoustic Guitars
J. O'Donnell1 G. McRobbie1 1University of the West of Scotland, Paisley, Scotland, United Kingdom |
|
A Study of the Effects of Mounting Supports, and Dissipation on a Piezoelectric Quartz Double-Ended Tuning Fork Gyroscope
G. Choi1 Y. Yong1 1Rutgers University, New Brunswick, NJ, USA |
|
Acoustic-Structure Interaction Modeling of Piezoelectric Transducer in Fluid Medium
V.M. Acosta1 E. Riera1 G. Rodriguez1 A. Pinto1 A. Cardoni2 J.A. Gallego-Juárez1 1Power Ultrasonics Group, CSIC, Serrano, Madrid, Spain 2Pusonics, Arganda del Rey, Madrid, Spain |
|
Acoustical Design of Stethoscope for Improved Performance
C. Thiagarajan1 Gururajan R.2 A. H. Baig2 Prema S.3 1ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, Karnataka India 2University of Southern Queensland, Toowoomba Qld 4350, Australia. 3RMK Engineering College, Chennai, Tamil Nadu, India |
|
Calibration of Ultrasonic Testing for Faults Detection in Stone Masonry
M. Usai1 S. Carcangiu1 G. Concu2 1Department of Electrical and Electronic Engineering, University of Cagliari, Cagliari, Italy 2Department of Civil Engineering, Environmental and Architecture, University of Cagliari, Cagliari, Italy |
|
COMSOL Analysis of Acoustic Streaming and Microparticle Acoustophoresis
H. Bruus1 P.B. Muller1 R. Barnkob1 M.J.H. Jensen2 1Technical University of Denmark, Kongens Lyngby, Denmark 2COMSOL, Kongens Lyngby, Denmark |
|
Designing Materials for Mechanical Invisibility Cloaks
P. Olsson1 F. Larsson1 A. Khlopotin1 S. Razanica1 1Chalmers University of Technology, Gothenburg, Sweden |
|
Earth Pressure as a Boundary Condition to Bridge Piers and Abutments
M. Quinn1 D. Whitlow1 O.D.S. Taylor1 M.H. McKenna1 1 Engineer Resource and Development Center, United States Army Corps of Engineers, Vicksburg, MS, USA |
|
Effects of Fluid and Structural Forces on the Dynamic Performance of High Speed Rotating Impellers.
C. Thiagarajan1 G. Shenoy2 B. S. Shenoy3 1ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, India. 2Department of Mechanical & Manufacturing Engineering, Manipal Institute of technology, Manipal, India 3Department of Aeronautical & Automobile Engineering, Manipal Institute of Technology, Manipal, India |
|
Glass Plates Noise Transmission Suppression by Means of Distributed Piezoelectric Composite Actuators Shunted by an Active Circuit
K. Novakova12 P. Mokry2 1Research Centre for Special Optics and Optoelectronic Systems (TOPTEC), Institute of Plasma Physics, Academy of Sciences of the Czech Republic, Turnov, Czech Republic 2Institute of Mechatronics and Computer Engineering, Technical University of Liberec, Liberec, Czech Republic |
|
Innovating New Products using Multiphysics Modeling
|
|
Mathematical Model for Prediction of Transmission Loss for Clay Brick Walls
J. Ratnieks1 A. Jakovics1 J. Klavins1 1Laboratory for Modeling Technological and Environmental Processes, University of Latvia, Riga, Latvia |
|
Modeling Acoustic Waveguides for Ear Impedance Measurements
R. Sisto1 L. Cerini1 D. Mambro2 A. Moleti2 F. Sanjust1 1INAIL Research, Monteporzio Catone, Italy 2Università di Roma, Tor Vergata, Italy |
|
Modeling and Experimental Verification of the Power Transfer and Thermal Characteristics of Piezoelectric Transformers Subjected to Combined Mechanical and Electrical Loading
S. Tuncdemir1 W.M. Bradley2 1Solid State Ceramics, Williamsport, PA, USA 2QorTek, Williamsport, PA, USA |
|
Modeling Low Frequency Axial Fluid Acoustic Modes in Continuous Loop Piping Systems
E. Gutierrez-Miravete1 E.R. Marderness2 1Rensselaer Polytechnic Institute, Hartford, CT, USA 2General Dynamics-Electric Boat, Groton, CT, USA |
|
Modeling of a Jecklin Disk for Stereophonic Recordings
G. McRobbie1 1University of the West of Scotland, Paisley, Renfrewshire, UK |
|
Modeling of Ultrasonic Fatigue-Life Testing Machine
D. Dimitrov1 V. Mihailov1 B. Kostov1 1Technical University of Varna, Varna, Bulgaria |
|
Modeling Thermal Bridging at Interface Conditions: Analysis of Solutions for Reducing Thermal Bridges Effects on Building Energy Consumption
C. Balocco1 E. Marmonti1 1Dipartimento di Energetica, Università di Firenze, Firenze, Italy |
|
Modelization of Photoacoustic Trace Gases Sensors
B. Parvitte1 C. Risser1 R. Vallon1 V. Zéninari1 1GSMA - Université de Reims, Reims, France |
|
Multiphysics Simulations in the Ultrasonic Industry
P.A. Colombo1 1DepQuest, Dalmine, Italy |
|
Nondestructive Testing of Composites Using Model Based Design
E. Nesvijski1 1ACOUSTICS@MBD CONSULTANTS, LLC, Westborough, MA, USA |
|
Numerical Simulation of Phonon Dispersion Relations for Phononic Crystals
G. Zhu1 E.M. Dede1 1Toyota Research Institute of North America, Ann Arbor, MI, USA |
|
Optimal Placement of Piezoelectric Plates to Control Multimode Vibrations of Rotating Beam
F. Botta1 D. Dini2 S. Gentili1 G. Cerri1 1Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Roma Tre, Roma, Italy 2Department of Mechanical Engineering, Imperial College London, London, United Kingdom |
|
Orientation of Piezoelectric Crystals and Acoustic Wave Propagation
G. Zhang1 1Clemson University, Clemson, SC, USA |
|
Piezoelectric Buzzer Optimization for Micropumps
A. Garcia1 A. Marcus1 F. Tejo1 C. Precker1 C. Moreira2 1Universidade Federal de Campina Grande, Campina Grande, PB, Brazil 2Instituto Federal de Alagoas, Maceio, AL, Brazil |
|
Quartz Transducer Modeling for Development of BAW Resonators
L.B.M. Silva1 E.J.P. Santos1 1Laboratory for Devices and Nanostructures, Electronics and Systems Department, Universidade Federal de Pernambuco, Recife, PE, Brasil |
|
Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator
B. Li1 J.H. You1 1Southern Methodist University, Dallas, TX, USA |
|
Simulation of an Ultrasonic Immersion Test for the Characterization of Anisotropic Materials
A. Castellano1 P. Foti1 A. Fraddosio1 S. Marzano1 M.D. Piccioni1 D. Scardigno1 1DICAR, Politecnico di Bari, Bari, Italy |
|
Simulation of Impact Damage in a Composite Plate and Its Detection
V. Pavelko1 I. Pavelko1 M. Smolyaninovs1 H. Pffeifer2 M. Wevers2 1Riga Technical University, Riga, Latvia 2Catholic University Leuven, Leuven, Belgium |
|
Thermal Analysis of a Piezo-Disk Ultrasound Probe
L. Spicci1 M. Cati1 1Esaote, Firenze, Italy |
|
Thermo-Acoustic Analysis of an Advanced Lean Injection System in a Tubular Combustor Configuration
A. Giusti1 A. Andreini1 B. Facchini1 F. Turrini2 Ignazio Vitale2 1Department of Energy Engineering, University of Florence, Florence, Italy 2Avio, Turin, Italy |
|
Thermoacoustic Analysis of Combustion Instability Importing RANS Data
G. Campa1 E. Cosatto2 S. Camporeale1 1Politecnico di Bari, Bari, Italy 2Ansaldo Energia, Genova, Italy |
|
Toward an Evaluation of the Tonal Colouring of the Japanese koto using COMSOL Multiphysics and Acoustics Module
K. Coaldrake1 1The University of Adelaide, Adelaide City, South Australia, Australia |
|
Towards Rotordynamic Analysis with COMSOL Multiphysics
M. Karlsson1 1ÅF, Stockholm, Sweden |
|
Two- and Three-Dimensional Holey Phononic Crystals with Unit Cells of Resonators
Y.F. Wang12 Y.S. Wang1 L. Wang2 1Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing, China 2Department of Mechanical Engineering, Østfold University College, Halden, Norway |
|
Vibration and Acoustic Analysis of a Trussed Railroad Bridge under Moving Loads
R. Costley1 H. Diaz-Alvarez1 M. McKenna1 A. Miller1 1U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA |
Share it on Social Media:

