Batteries, Fuel Cells, and Electrochemical Processes
|
Application of COMSOL Multiphysics in the Simulation of Magnesium Refining and Production
X. Guan1 E. Gratz1 U. Pal1 1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA |
|
Comparison Between Turbulent and Laminar Bubbly-Flow for Modeling H2/H2O Separation
E. Amores Vera1 J. Rodríguez Ruiz1 1Centro Nacional del Hidrógeno, Puertollano, Spain |
|
Constructing COMSOL Models of a Bacteriological Fuel Cell
R. Coker1 J. Mansell1 1NASA - Marshall Space Flight Center, Huntsville, AL, USA |
|
Current Density Distribution and Material Removal Behavior on the Graphite/Iron-matrix Interface in Cast Iron Under Pulse Electrochemical Machining Conditions
O. Weber1 R. Kollmannsperger2 D. Bähre2 1Center for Mechatronics and Automatization, Saarbrücken, Germany 2Institute of Production Engineering, Saarland University, Saarbrücken, Germany |
|
Design and Simulation of MEMS Based Piezoelectric Vibration Energy Harvesting System
M. C. B. Kumar1 D. B. Prabhu1 R. Akila1 A. Gupta1 M. Alagappan1 1PSG College of Technology, Coimbatore, Tamil nadu, India |
|
Design and Simulation of Sensors to Detect Methanol
C. K. Subramaniam1 Muthuraja1 1School of Electronics Engineering, VIT University, Vellore, Tamil Nadu, India |
|
Dynamic Simulation of Electrochemical Etching of Silicon with COMSOL
A. Ivanov1 U. Mescheder1 1Furtwangen University, Furtwangen, Germany |
|
Electrochemical Impedance Spectroscopy of a LiFePO4/Li Half-Cell
M. Cugnet1 I. Baghdadi1 M. Perrin1 1INES - CEA, Grenoble, France |
|
Heat Pipe Assisted Thermal Management of an HT PEMFC Stack
E. Firat1 G. Bandlamudi1 M. Crisogianni1 P. Beckhaus1 A. Heinzel1 1Centre for Fuel Cell Technology (ZBT), Duisburg,NRW, Germany |
|
Kinetic Investigation of a Mechanism for Generating Microstructures on Polycrystalline Substrates Using an Electroplating Process
T. Soares1 H. Mozaffari2 H. Reinecke1 1Universität Freiburg, Freiburg im Breisgau, BW, Germany 2Hochschule Furtwangen, Tuttlingen, BW, Germany |
|
Low Pt Cathodes for High Performance PEMFCs: Modeling and Experiments
F. Daouda1 J. Hamelin1 P. Benard1 S. Kumar Natarajan 1 1Insitut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada |
|
Modeling a Non-Flooding Hybrid Polymer Electrolyte Fuel Cell and Related Diffusion-Migration-Reaction Systems
B.E. McNealy1 J.L. Hertz1 1University of Delaware, Newark, DE, USA |
|
Modeling an Enzyme Based Electrochemical Blood Glucose Sensor with COMSOL Multiphysics
S. Mackintosh1 J. Rodgers1 S.P. Blythe1 1Lifescan Scotland, Inverness, Scotland |
|
Modeling of HTPEM Fuel Cell Start-Up Process by Using COMSOL Multiphysics
Y. Wang1 D. Uwe Sauer1 1Electrochemical Energy Conversion and Storage Systems, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Aachen, Germany |
|
Modeling of Lead-acid Flow Battery
M. N. Nandanwar1 S. K. Gupta1 1Indian Institute of Science, Bangalore, India |
|
Modeling of Supercapacitor
G. Madabattula1 S. K. Gupta1 1Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India |
|
Modeling Proton Transport in Hydrophobic Polymeric Electrolytes
M. Andrews1 1Caribbean Industrial Research Institute, Calibration Laboratory, University of the West Indies, St. Augustine, Trinidad and Tobago |
|
Modeling the Behavior of a Polymer Electrolyte Membrane within a Fuel Cell Using COMSOL
S. Beharry1 1University of the West Indies, St. Augustine, Trinidad and Tobago |
|
Modeling the Effect of Discrete Distributions of Platinum Particles in the PEM Fuel Cell Catalyst Layer
C.F. Cetinbas1 A.K. Prasad2 S.G. Advani1 1Center for Fuel Cell Research, Department of Mechanical Engineering, University of Delaware, Newark, DE, USA 2University of Delaware, Newark, DE, USA |
|
Multiphysics Simulation of a Circular-Planar Anode-Supported Solid Oxide Fuel Cell
K. Daneshvar1 A. Fantino1 C. Cristiani1 G. Dotelli1 R. Pelosato1 M. Santarelli2 1Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Milano, Italy 2Politecnico di Torino, Dipartimento di Energetica, Torino, Italy |
|
Multiphysics Simulation of the Electrochemical Finishing of Micro Bores
M. Hackert-Oschätzchen1 M. Kowalick1 G. Meichsner2 A. Schubert12 1Chemnitz University of Technology, Chemnitz, Germany 2Fraunhofer Institute for Machine Tools and Forming Technology IWU, Chemnitz, Germany |
|
Numerical Modeling of Pit Growth in Microstructure
S. Qidwai1 N. Kota2 V. DeGiorgi1 1Naval Research Laboratory, Washington, DC, USA 2Science Applications International Corporation, Washington, DC, USA |
|
Numerical Simulation of Electrolyte-Supported Planar Button Solid Oxide Fuel Cell
A. Aman1 R. Gentile1 Y. Chen1 X. Huang2 Y. Xu1 N. Orlovskaya1 1Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL, USA 2Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA |
|
Optimizing Fuel Cell Design with COMSOL Multiphysics
Chin-Hsien Cheng1 1Renewable Energy RD Center, Chung-Hsin Electric & Machinery, Taiwan |
|
Parametric Study of Electrolyte-Supported Planar Button Solid Oxide Fuel Cell
A. Aman1 R. Gentile1 Y. Xu1 N. Orlovskaya1 1Department of Mechanical, Materials and Aerospace Engineering, University of Central Florida, Orlando, FL, USA |
|
Simulation of Current Density for Electroplating on Silicon Using a Hull Cell
F. Lima1 U. Mescheder1 H. Reinecke3 1Hochschule Furtwangen University, Furtwangen, Baden-Wuerttemberg, Germany 3Institut für Mikrosystemtechnik, Freiburg im Breisgau, Baden-Wuerttemberg, Germany |
|
Study of Tertiary Current Distributions on the Wafer in a Plating Cell
L. Tong1 1Keisoku Engineering System Co., Ltd,. Chiyoda-ku, Tokyo, Japan |
|
Tertiary Current Distributions on the Wafer in a Plating Cell
L. Tong1 1Keisoku Engineering System Co., Tokyo, Japan |
|
Three Dimensional Modeling of PEM Fuel Cells with Current Collection from the Gas Diffusion Layer
R. Pushpangadan1 A. Soman2 Arundas R.2 N. G. Thoppan2 S. P. Duttagupta1 1Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India 2College of Engineering, Munnar, Kerala, India |
Share it on Social Media:
