Computational Fluid Dynamics
|
3-Dimensional Blood Cooling Model inside a Carotid Bifurcation
R. Sikorski1 T. Merrill1 1Rowan University, Glassboro, NJ, USA |
|
3D Modeling of Fracture Flow in Core Samples Using μ-CT Data
S. Hoyer1 U. Exner2 M. Voorn1 A. Rath3 1Department of Geodynamics and Sedimentology, University of Vienna, Austria 2Museum of Natural History, Vienna, Austria 3OMV ESG-D Production Geology, Vienna, Austria |
|
3D Modeling of Urban Areas for Built Environment Applications Using COMSOL
J. van Schijndel1 1Eindhoven University of Technology, Eindhoven, The Netherlands |
|
3D Simulation of Air-Glass Heat Exchange in a Set of Vials
G. Mongatti1 A. Borelli1 1Marchesini Group, Pianoro, Italy |
|
A Computational Approach for Optimizing the First Flyer Using COMSOL Multiphysics
A.H. Aziz1 H. Pourzand1 A.K. Singh1 1Pennsylvania State University, University Park, PA, USA |
|
A Coulomb Stress Model to Simulate Induced Seismicity Due to Fluid Injection and Withdrawal in Deep Boreholes
G. Perillo1 G. De Natale2 C. Troise2 A. Troiano2 M.G. Di Giuseppe2 A. Tramelli2 1University of Naples Parthenope, Naples, Italy 2INGV, Osservatorio Vesuviano, Naples, Italy |
|
A Multiphysics Approach to the Modeling of Biological Prosthetic Heart Valves
A. Avanzini1 D. Battini1 M. Berardi1 1Università degli Studi di Brescia, Brescia, Italy |
|
A Parametric Study of Shock Wave Simulations with Help of COMSOL Multiphysics
F. Ferrero1 R. Meyer1 M. Kluge1 V. Schröder1 1BAM Federal Institute for Materials Research and Testing, Berlin, Germany |
|
A Simplified Numerical Model for Simulating Sliding Door and Surgical Staff Movement in an Operating Theater
C. Balocco1 1Dipartimento di Energetica, Università di Firenze, Firenze, Italy |
|
A Theoretical Model for the Control of Color Degradation and Microbial Spoilage Occurring in Food Convective Drying
S. Curcio1 M. Aversa1 1University of Calabria, Department of Engineering Modeling, Rende, Cosenza, Italy |
|
Advancements in Carbon Dioxide and Water Vapor Separations Using COMSOL
J. Knox1 K. Kittredge1 R.F. Coker1 R. Cummings1 C.F. Gomez1 1NASA - Marshall Space Flight Center, Huntsville, AL, USA |
|
Application of COMSOL Multiphysics in the Simulation of Magnesium Refining and Production
X. Guan1 E. Gratz1 U. Pal1 1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA |
|
Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations
J. van Schijndel1 C. van Dronkelaar1 1Eindhoven University of Technology, Eindhoven, The Netherlands |
|
Assessment of Anterior Spinal Artery Blood Flow following Spinal Cord Injury
M. Alshareef1 A. Alshareef2 V. Krishna3 M. Kindy3 T. Shazly4 1College of Medicine, Medical University of South Carolina, Charleston, SC, USA 2Department of Biomedical Engineering, Duke University, Durham, NC, USA 3Department of Neurosurgery, Medical University of South Carolina, Charleston, SC, USA 4Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA |
|
Building Energy Simulation Using the Finite Element Method
J. van Schijndel1 1Eindhoven University of Technology, Eindhoven, The Netherlands |
|
Calibration of MHD Flow Meter using COMSOL Multiphysics
S. Sahu1 R. P .Bhattachryay1 E. R. Kumar1 1Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India. |
|
Comparative Numerical Studies of Scramjet Inlet Performance Using k-ε Turbulence Model with Adaptive Grids
V. Gopal1 R. Kolluru1 1BMS College of Engineering, Bangalore, Karnataka, India |
|
Comparison Between Turbulent and Laminar Bubbly-Flow for Modeling H2/H2O Separation
E. Amores Vera1 J. Rodríguez Ruiz1 1Centro Nacional del Hidrógeno, Puertollano, Spain |
|
Computational Modeling and Simulation of the Human Duodenum
B. Hari1 S. Bakalis1 P. Fryer1 1The University of Birmingham, School of Chemical Engineering, Edgbaston, Birmingham, United Kingdom |
|
Computationally Assisted Design and Experimental Validation of a Novel ‘Flow-Focussed’ Microfluidics Chip for Generating Monodisperse Microbubbles
M. Conneely1 V. Hegde2 H. Rolfsnes1 A. Mason2 D. McLean1 C. Main1 F.J.D. Smith2 W.H.I. McLean2 P.A. Campbell1 1Carnegie Physics Laboratory, University of Dundee, Dundee, Scotland, United Kingdom 2Division of Molecular Medicine, University of Dundee, Dundee, Scotland, United Kingdom |
|
COMSOL Computational Fluid Dynamics for Microreactors Used in Volatile Organic Compounds Catalytic Elimination
M. Olea1 S. Odiba1 S. Hodgson1 A. Adgar1 1School of Science and Engineering, Teesside University, Middlesbrough, United Kingdom |
|
COMSOL Multiphysics: Innovative Design and Engineering
S. Wang1 1Department of Mechanical Engineering, Kun Shan University of Technology, Tainan, Taiwan |
|
COMSOL Simulations for Steady State Thermal Hydraulics Analyses of ORNL’s High Flux Isotope Reactor
P.K. Jain1 V.B. Khane2 J.D. Freels1 1Oak Ridge National Laboratory, Oak Ridge, TN, USA 2Missouri University of Science and Technology, Rolla, MO, USA |
|
Coupled Electric-Thermal-Fluid Analysis of High Voltage Bushing
G. Eriksson1 1ABB, Corporate Research, Västerås, Sweden |
|
Coupling Heat Transfer in Heat Pipe Arrays with Subsurface Porous Media Flow for Long Time Predictions of Solar Rechargeable Geothermal Systems
P. Oberdorfer1 R. Hu1 M. Azizur Rahman1 E. Holzbecher1 M. Sauter1 P. Pärisch2 1Applied Geology, Geoscience Centre, University of Göttingen, Göttingen, Germany 2Institute for Solar Energy Research Hameln/Emmerthal (ISFH), Emmerthal, Germany |
|
Cryogenic Heat Sink for Helium Gas Cooled Superconducting Power Devices
L. Graber1 N.G. Suttell1 D. Shah1 D.G. Crook1 C.H. Kim1 J. Ordonez1 S. Pamidi1 1Center for Advanced Power Systems, Florida State University, Tallahassee, FL, USA |
|
Deposition of Submicron Charged Spherical Particles in the Trachea of the Human Airways
H.O. Åkerstedt1 1Luleå University of Technology, Luleå, Sweden |
|
Design and Simulation of Piezoelectric Micropump and Microvalve based Drug Delivery System
D. Samajdar1 P. Podder1 A. Bhattacharyya1 S. Sen1 1Institute of Radio Physics and Electronics, University of Calcutta, Kolkata, WB, India |
|
Design of a Controlled Dosing Scheme for Liquids using a Venturi
M. Dagaonkar1 V. Kumaran1 R. Venkataraghavan1 D. C. Franklin1 1Unilever R&D, Bangalore, Karnataka, India |
|
Determination and Verification of the Forchheimer Coefficients for Ceramic Foam Filters using COMSOL CFD Modeling
M.W. Kennedy1 K. Zhang1 J.A. Bakken1 R.E. Aune1 1Norwegian University of Science and Technology, Trondheim, Norway |
|
Dynamics of a Sessile Droplet Evaporation
G. Marinaro1 A. Accardo1 E. Di Fabrizio1 1Istituto Italiano di Tecnologia, Nanostructures Department, Genova, Italy |
|
Evaluation of Internal Electrical Heater for Pipe Temperature Control Using FEA Model
B. Xu1 M. Heydrich1 S. Edmondson1 A. Jahangir 1 1ShawCor Ltd., Toronto, ON, Canada |
|
Experimental Validation of Model of Electro-Chemical-Mechanical Planarization (ECMP) of Copper
J. Ebert1 S. Ghosal1 A. Emami-Naeini1 1SC Solutions, Sunnyvale, CA, USA |
|
Flare System Pressure Drop Calculations Using COMSOL
K. Alhazza1 B. Albusairi1 H. Kamal1 H.M.S. Lababiedi1 A.A. Abbas2 1Kuwait University, Kuwait City, Kuwait 2Petrochemical Industries Company, Kuwait City, Kuwait |
|
Flow of Dry Foam in a Pipe
M. Divakaran1 S. K. Gupta1 1Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India |
|
Fracture-Matrix Flow Partitioning and Cross Flow: Numerical Modeling of Laboratory Fractured Core Flood
R. Sanaee1 G.F. Oluyemi1 M. Hossain1 B.M. Oyeneyin1 1Robert Gordon University, Aberdeen, United Kingdom |
|
Geometric Modeling and Numerical Simulation of Airfoil Shapes Using Integrated MATLAB® and COMSOL Multiphysics
A. Safari1 H. Lemu G.1 H. Severson1 1University of Stavanger, Stavanger, Norway |
|
Geometric Optimization of Micromixers
M. Jain1 A. Rao1 K. Nandakumar1 1Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA |
|
Gravitational Collapse of Rectangular Granular Piles
M.H. Babaei1 T. Dabros2 S.B. Savage3 1Ocean, Coastal, and River Engineering, National Research Council of Canada, Ottawa, ON, Canada 2Natural Resources Canada, CanmetENERGY, Devon, AB, Canada 3Department of Civil Engineering & Applied Mechanics, McGill University, Montreal, QC, Canada |
|
Heat Transfer Modeling of Steam Methane Reforming
E. Carcadea1 M. Varlam1 I. Stefanescu1 1National Research Institute for Isotopic & Cryogenic Technologies, Rm.Vâlcea, Romania |
|
Innovating New Products using Multiphysics Modeling
|
|
Investigation of Blade Profiles of Vertical Axis Wind Turbine by Numerical Simulation
S. Yoshioka1 1Ritsumeikan University, Kusatsu City, Shiga, Japan |
|
Irrotational Motion of an Incompressible Fluid Past a Wing Section in an Unbounded Region
J. Russell1 1Florida Institute of Technology, Melbourne, FL, USA |
|
Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration
M. Courtois1 M. Carin2 P. LeMasson2 S. Gaied 1 1ArcelorMittal, Global R&D, Montataire, France 2LIMATB Laboratory, Université de Bretagne Sud, Lorient, France |
|
Low Pt Cathodes for High Performance PEMFCs: Modeling and Experiments
F. Daouda1 J. Hamelin1 P. Benard1 S. Kumar Natarajan 1 1Insitut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada |
|
Miscible Viscous Fingering: Application in Chromatographic Columns and Aquifers
S. Pramanik1 G. L. Kulukuru1 M. Mishra1 1Indian Institute of Technology Ropar, Rupnagar, Punjab, India |
|
Modeling Fluid-Induced Porous Scaffold Deformation
J. Podichetty Thribhuvan1 S.V. Madihally1 1Oklahoma State University, Stillwater, OK, USA |
|
Modeling Large-Scale Mine Dewatering by Using Subsurface Flow Module in COMSOL Multiphysics
J. Molinero1 A. Nardi1 P. Trinchero1 1Amphos 21, Barcelona, Spain |
|
Modeling Magnetic Configurations for Improved Separations of Magnetic and Non-Magnetic Materials
S. Khushrushahi1 T.A. Hatton1 M. Zahn1 1Massachusetts Institute of Technology, Cambridge, MA, USA |
|
Modeling of HTPEM Fuel Cell Start-Up Process by Using COMSOL Multiphysics
Y. Wang1 D. Uwe Sauer1 1Electrochemical Energy Conversion and Storage Systems, Institute for Power Electronics and Electrical Drives (ISEA), RWTH Aachen University, Aachen, Germany |
|
Modeling of Laminar Flow Static Mixers
N. Elabbasi1 X. Liu1 S. Brown1 M. Vidal2 M. Pappalardo2 1Veryst Engineering LLC, Needham, MA, USA 2Nordson EFD, East Providence, RI, USA |
|
Modeling of the Reduction Stage during the Continuous Refining of Copper in a Packed Bed Reactor
F. Mansilla1 L. Voisin 2 1Advanced Mining Technology Center, Chile University, Santiago, Chile 2Department of Mining Engineering, Advanced Mining Technology Center, Chile University, Santiago, Chile |
|
Modeling Pit Lake Flooding After Mine Closure
S. Jordana1 A. Nardi1 1Amphos 21, Barcelona, Spain |
|
Modeling Void Drainage with Thin Film Dynamics
J.J. Gangloff Jr.1 W.R. Hwang2 S.G. Advani1 1Center for Composite Materials, Department of Mechanical Engineering, University of Delaware, Newark, DE, USA 2School of Mechanical Engineering, Gyeongsang National University, Jinju, Gyeongsangnam-do, Korea |
|
Modelling and Simulation of Single Phase Fluid Flow and Heat Transfer in Packed Beds using COMSOL Multiphysics
S. Sachdev1 S. Pareek1 B. Mahadevan1 A. Deshpande1 1Department of Chemical Engineering, BITS Pilani Goa Campus, Zuarinagar, Goa, India |
|
Multiphysics Modeling of a Metal Foam
B. Chinè 13 M. Monno2 1Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy 2Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy 3Instituto Tecnologico de Costa Rica, Cartago, Costa Rica |
|
Multiphysics Process Simulation of Static Magnetic Fields in High Power Laser Beam Welding of Aluminum
M. Bachmann1 V. Avilov1 A. Gumenyuk1 M. Rethmeier1 1BAM Federal Institute for Materials Research and Testing, Berlin, Germany |
|
Multiphysics Simulation of a Circular-Planar Anode-Supported Solid Oxide Fuel Cell
K. Daneshvar1 A. Fantino1 C. Cristiani1 G. Dotelli1 R. Pelosato1 M. Santarelli2 1Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Milano, Italy 2Politecnico di Torino, Dipartimento di Energetica, Torino, Italy |
|
Multiphysics Simulations of Granular Sludge on the Optimization of Effluent Treatment Plant
S. Gunsekaran 1 R. C. Thiagarajan1 1ATOA Scientific Technologies Private Limited, Bangalore, India |
|
Numerical Analysis of Conjugate Heat Transfer in Foams
N. Bianco1 R. Capuano1 W.K.S. Chiu2 S. Cunsolo1 V. Naso1 M. Oliviero1 1DETEC, Università degli Studi Federico II, Napoli, Italy 2Department of Mechanical Engineering, University of Connecticut, Storrs, CT, USA |
|
Numerical Aspects of the Implementation of Artificial Boundary Conditions for Laminar Fluid-Structure Interactions
C. Boeckle1 P. Wittwer1 1University of Geneva, Geneva, Switzerland |
|
Numerical Investigation of Non-Newtonian Laminar Flow in a Curved Tube with Insert
A. Kadyyrov1 1Research Center for Power Engineering Problems, KSC, RAS, Russia |
|
Numerical Investigation of the Convective Heat Transfer Enhancement in Coiled Tubes
L. Cattani1 1Dipartimento di Ingegneria Industriale, Università degli Studi di Parma, Parma, Italy |
|
Numerical Modeling and Performance Optimization Study of a Diaphragm Pump for Medical Application
I. Lupelli1 P. Gaudio1 A. Malizia1 R. Quaranta1 1Department of Industrial Engineering, University of Rome “Tor Vergata”, Roma, Italy |
|
Numerical Modeling of Powder Flow During Coaxial Laser Direct Metal Deposition: Comparison Between Ti-6Al-4V Alloy and 316L Stainless Steel
S. Morville1 M. Carin1 D. Carron1 P. Le Masson1 M. Gharbi2 P. Peyre2 R. Fabbro2 1Université de Bretagne-Sud/UEB-LIMATB, Lorient, France 2PIMM, Arts et Métiers ParisTech, Paris, France |
|
Numerical Simulation of Oil Recovery by Polymer Injection using COMSOL
J. Wegner1 L. Ganzer1 1Clausthal University of Technology, Clausthal, Germany |
|
Numerical Study and Simulation in COMSOL Multiphysics of the Dilution Process during Dust Sampling in Dry Machining
B. Wenga-Ntcheping1 A. Djebara1 R. Kamguem1 J. Kouam1 V. Songmene1 1University of Quebec-École de Technologie Supérieure, Montreal, Canada |
|
Numerical Study of a DC Electromagnetic Liquid Metal Pump: Limits of the Model
N. Kandev1 1Institut de recherche d'Hydro-Québec, Shawinigan, QC, Canada |
|
Numerical Study of Navier-Stokes Equations in Supersonic Flow over a Double Wedge Airfoil using Adaptive Grids
V. Gopal1 R. Kolluru1 1BMS College of Engineering, Bangalore, Karnataka, India. |
|
Particle Tracing: Analysis of Airborne Infection Risks in Operating Theatres
P. Apell1 S. Hjalmarsson1 T. Lindberg1 I. Wernström1 Y. Tarakonov1 A. Erichsen Andersson2 M. Karlsteen1 1Department of Applied Physics, Chalmers University of Technology, Göteborg, Sweden 2Sahlgrenska University Hospital, Department of Anesthesia, Surgery and Intensive Care, Göteborg, Sweden |
|
Passive Cooling of Power Electronics: Heat in the Box
M. Berger1 W. Schernus1 1West Coast University of Applied Sciences, Heide, Germany |
|
Pore-Scale Simulation of Two-Phase Flow with Heat Transfer Through Dual-Permeability Porous Medium
H.A. Akhlaghi Amiri1 A.A. Hamouda1 1University of Stavanger, Stavanger, Rogaland, Norway |
|
Possibility of Implicit LES for Two-Dimensional Incompressible Lid-Driven Cavity Flow Based on COMSOL Multiphysics
M. Hashiguchi1 1Keisoku Engineering System Co., Ltd. Chiyoda-ku, Tokyo, Japan |
|
Predicting the Retention Time of Nuclear Reaction Products in the PSI Recoil Chamber Using COMSOL Multiphysics
R. Dressler1 R. Eichler1 1Paul Scherrer Institute, Villigen, Switzerland |
|
Pressure Drop CFD Modeling in Spacer-Filled Channels for TFF Ultrafiltration
Y. Zou1 1EMD Millipore Corporation, Bedford, MA USA |
|
Simplified Numerical Model of an Axial Impeller
A.-M. Georgescu1 S.-C. Georgescu2 1Hydraulics and Environmental Protection Department, Technical University of Civil Engineering, Bucharest, Romania 2Hydraulics Department, University “Politehnica”, Bucharest, Romania |
|
Simulation and Analysis of Two Fans Air Speed Match Design in Off-Road Mine Tract Generator Using COMSOL
Y. Shen1 D. Wu1 1Beijing University of Science & Technology, Beijing, China |
|
Solar Cell Cooling and Heat Recovery in a Concentrated Photovoltaic System
M. Cozzini1 1Fondazione Bruno Kessler (FBK), Renewable Energies and Environmental Technologies (REET) Unit, Trento, Italy |
|
The Use of CFD to Simulate Turbulent Flows in Laboratory and Full Scale Flocculation Processes
A.H. Ito1 O.T. Kaminata 1 S.R. Lautenschlager1 1State University of Maringá, Maringá, Paraná, Brazil |
|
Thermal Adversity in Solid-State Lighting
T. Dreeben1 1OSRAM SYLVANIA, Beverly, MA, USA |
|
Thermal and Fluid Dynamics Studies Applied to Steel Industry
G. Tracanelli1 M. Culos1 1Studio di Ingegneria Industriale Tracanelli, San Vito al Tagliamento, Italy |
|
Thermal Hydraulic Study for Heavy Liquid Metal Flows using COMSOL Multiphysics
K. T. Sandeep1 S. Sahu1 V. C. Chaudhari1 R. P. Bhattacharyay1 E. R. Kumar1 1Institute for Plasma Research, Gandhinagar, Gujarat, India |
|
Thermo-Fluid Dynamics FEM Simulation of Advanced Water Cold Plates for Power Electronics
N. Delmonte1 F. Giuliani1 P. Cova1 1Dipartimento di Ingegneria dell'Informazione, Università degli Studi di Parma, Parma, Italy |
|
Thermo-Fluid Dynamics of Flue Gas in Heat Accumulation Stoves: Study Cases
D. Rossi1 P. Scotton1 1University of Padova, Department of Geosciences, Padova, Italy |
|
Turbulent Bounded Flows for Oil & Gas Industry with COMSOL CFD Module
A. Fadel1 G. Fontana1 1Isoil Impianti, Albano S. Alessandro, Italy |
|
Turbulent Compressible Flow in a Slender Tube
K.O. Lund1 C.M. Lord2 1Kurt Lund Consulting, Del Mar, CA, USA 2Lord Engineering Corp., Encinitas, CA, USA |
|
Two Dimensional Blood Shear Modeling in a Blood Cooling Catheter
R. Sikorski1 B. Chapman1 T. Merrill1 1Rowan University, Glassboro, NJ, USA |
|
Two-Phase Flow and Multiphysics Simulations in COMSOL
|
|
Using a Level-Set Model to Estimate Dwell Time in a Vacuum Dewatering Process for Paper
K. Rezk1 1Department of Energy, Environmental and Building Technology, Karlstad University, Kronoparken, Sweden |
|
Using CFD to Predict the Performance of Innovative Wind Power Generators
D. Allaei1 1Sheer Wind Inc., Chaska, MN, USA |
|
Ventilation System of a Microwave Assisted Drying Kiln
A.-G. Ghiaus1 M.-A. Istrate1 A. Georgescu1 1Technical University of Civil Engineering, Bucharest, Romania |
|
Wind Flow Modeling of Area Surrounding the Case Western Reserve University Wind Turbine
M. Fernandes1 D. Matthiesen1 1Case Western Reserve University, Cleveland, OH, USA |
Share it on Social Media:
