Multiphysics
|
3D Simulations of an Injection Test Done Into an Unsaturated Porous and Fractured Limestone
A. Thoraval1 Y. Guglielmi2 F. Cappa3 1INERIS, Nancy, France 2CEREGE, Aix-en-Provence, France 3GEOAZUR, Valbonne, France |
|
A Mathematical Tool for Studying Drug Delivery to the Eye in Case of Glaucoma
P. Silva1 J.A. Ferreira2 P. de Oliveira2 1Coimbra Institute of Engineering, CMUC, Coimbra, Portugal 2Department of Mathematics University of Coimbra, CMUC, Coimbra, Portugal |
|
A Model of Electric Field Assisted Capillarity for the Fabrication of Hollow Microstructures
C. Tonry1 M. K. Patel1 C. Bailey1 M. P.Y. Desmuliez2 W. Yu3 1Computational Mechanics and Reliability Group (CMRG), School of Computing and Mathematical Sciences, University of Greenwich, London, United Kingdom 2Microsystems Engineering Centre (MISCEC, School of Engineering & Physical Sciences, Heriot Watt University, Earl Mountbatten Building, Edinburgh, United Kingdom 3State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, Jilin, China |
|
A Multiscale-Multiphysics Model for Axon Pathfinding Simulation, the Example of the Olfactory System
G. Naldi1 G. Aletti1 P. Causin1 1Dipartimento di Matematica ‘F. Enriques’, Università degli Studi di Milano, Milano, Italy |
|
Acoustic-Structure Interaction Modeling of Piezoelectric Transducer in Fluid Medium
V.M. Acosta1 E. Riera1 G. Rodriguez1 A. Pinto1 A. Cardoni2 J.A. Gallego-Juárez1 1Power Ultrasonics Group, CSIC, Serrano, Madrid, Spain 2Pusonics, Arganda del Rey, Madrid, Spain |
|
Acoustical Design of Stethoscope for Improved Performance
C. Thiagarajan1 Gururajan R.2 A. H. Baig2 Prema S.3 1ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, Karnataka India 2University of Southern Queensland, Toowoomba Qld 4350, Australia. 3RMK Engineering College, Chennai, Tamil Nadu, India |
|
Ampacity Simulation of a High Voltage Cable Used in Offshore Wind Farms
E. Pelster1 1Wenger Engineering, Ulm, Germany |
|
An Integrated Numerical-Experimental Approach for Heat Transfer Analysis of Industrial Furnaces
G. Petrone1 A. Adorisio2 S. Adorisio2 M. Calderisi3 A. Cecchi3 M. Scionti1 F. Turchi3 1BE CAE & Test, Catania, Italy 2Gadda Industrie, Ivrea, Italy 3Laboratori Archa, Pisa, Italy |
|
Analysis & Design Optimization of Laterally Driven PolySilicon Electro-thermal Microgripper for Micro-objects Manipulation
T. Pahwa1 S. Gupta1 V. Bansal1 R. Narwal1 B. Prasad1 D. Kumar1 1Electronic Science Department, Kurukshetra University, Kurukshetra, India |
|
AO@SW with Vrala: Simulations and Tests
C. Del Vecchio1 G. Agapito1 L. Carbonaro1 F. Marignetti2 E. De Santis2 Y. Coia2 1National Institute for Astrophysics, Arcetri Astrophysical Observatory, Firenze, Italy 2University of Cassino and Southern Latium, Cassino, Italy |
|
Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations
J. van Schijndel1 C. van Dronkelaar1 1Eindhoven University of Technology, Eindhoven, The Netherlands |
|
Calculations of the FMR Spectrum in 1D Magnonic Crystals
M. Mruczkiewicz1 M. Krawczyk1 V.K. Sakharov2 Yu. V. Khivintsev2 Yu. A. Filimonov2 S. A. Nikitov3 1Nanomaterials Physics Division, Faculty of Physics, Adam Mickiewicz University, Poznań, Poland 2Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences (Saratov Branch), Saratov, Russia; Laboratory “Metamaterials”, Chernyshevsky Saratov State University, Saratov, Russia 3Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences, Moscow, Russia; Laboratory “Metamaterials”, Chernyshevsky Saratov State University, Saratov, Russia |
|
Comparison of Heat and Mass Transport at the Micro-Scale
E. Holzbecher1 S. Oehlmann1 1Georg-August Universität Göttingen, Göttingen, Germany |
|
Computation of Capacitance, Inductance, and Potential Distribution of Integrated-Circuit Interconnects for Unshielded Four Conductors with Three Levels Systems
S.M. Musa1 M.N.O. Sadiku1 J.D. Oliver1 1Prairie View A&M University, Prairie View, TX, USA |
|
Computational Modeling and Simulation of the Human Duodenum
B. Hari1 S. Bakalis1 P. Fryer1 1The University of Birmingham, School of Chemical Engineering, Edgbaston, Birmingham, United Kingdom |
|
COMSOL Simulations for Steady State Thermal Hydraulics Analyses of ORNL’s High Flux Isotope Reactor
P.K. Jain1 V.B. Khane2 J.D. Freels1 1Oak Ridge National Laboratory, Oak Ridge, TN, USA 2Missouri University of Science and Technology, Rolla, MO, USA |
|
COMSOL-based Simulations of Criticality Excursion Transients in Fissile Solution
C. Hurt1 P. Angelo2 R. Pevey1 1Department of Nuclear Engineering, University of Tennessee, Knoxville, TN, USA 2Y-12 National Security Complex, Safety Analysis Engineering, Oak Ridge, TN, USA |
|
Conjugate Heat Transfer
J. Crompton1 L. Gritter1 S. Yushanov1 K. Koppenhoefer1 1AltaSim Technologies, Columbus, OH, USA |
|
Constructing COMSOL Models of a Bacteriological Fuel Cell
R. Coker1 J. Mansell1 1NASA - Marshall Space Flight Center, Huntsville, AL, USA |
|
Coupled Heat and Moisture Transfer in Building Components - Implementing WUFI® Approaches in COMSOL Multiphysics
B. Nusser1 M. Teibinger1 1Holzforschung Austria, Vienna, Austria |
|
Coupled Hydrochemical Modeling for the Optimal Design of an In-situ Redox Experiment
P. Trinchero1 J. Molinero1 G. Román-Ross1 A. Nardi1 L.M. De Vries1 T. Karvonen2 P. Pitkänen3 1Amphos 21, Barcelona, Spain 2WaterHope, Helsinki, Finland 3Posiva, Eurajoki, Finland |
|
Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions
M. Bianchi Janetti1 F. Ochs1 1University of Innsbruck, Innsbruck, Austria |
|
Coupling Multiphysics with Geochemistry: The COMSOL-PhreeqC Interface
A. Nardi1 L. M. de Vries1 P. Trinchero1 A. Enrique Idiart 1 J. Molinero1 1Amphos 21, Barcelona, Spain |
|
Deposition of Submicron Charged Spherical Particles in the Trachea of the Human Airways
H.O. Åkerstedt1 1Luleå University of Technology, Luleå, Sweden |
|
Design and Nuclear-Safety Related Simulations of Bare-Pellet Test Irradiations for the Production of Pu-238 in the High Flux Isotope Reactor Using COMSOL
J.D. Freels1 P.K. Jain1 R.W. Hobbs1 1Oak Ridge National Laboratory, Oak Ridge, TN, USA |
|
Design and Simulation of MEMS based Thermally Actuated Positioning Systems
D. Mallick1 P. K. Podder1 A. Bhattacharyya1 1Institute of Radio Physics & Electronics, University of Calcutta, Kolkata, India |
|
Design and Simulation of Piezoelectric Micropump and Microvalve based Drug Delivery System
D. Samajdar1 P. Podder1 A. Bhattacharyya1 S. Sen1 1Institute of Radio Physics and Electronics, University of Calcutta, Kolkata, WB, India |
|
Design Geometry Optimization of Vertical Cracks in Thermal Barrier Coatings from Simulated Thermal and Mechanical Behavior
C. Heveran1 J. Xu1 D. Cole2 S. Basu1 V. Sarin1 1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA 2Department of Mechanical Engineering, Boston University, Brookline, MA, USA |
|
Design Variability of a MEMS Resonator
H. van Halewijn1 J. Beek2 1Physixfactor, Nijmegen, The Netherlands 2NXP, Eindhoven, The Netherlands |
|
Dynamic Simulation of Electrochemical Etching of Silicon with COMSOL
A. Ivanov1 U. Mescheder1 1Furtwangen University, Furtwangen, Germany |
|
Dynamics of a Sessile Droplet Evaporation
G. Marinaro1 A. Accardo1 E. Di Fabrizio1 1Istituto Italiano di Tecnologia, Nanostructures Department, Genova, Italy |
|
Elastoplastic Deformation in a Wedge-Shaped Plate Caused by a Subducting Seamount
M. Ding1 J. Lin2 1MIT/WHOI Joint Program in Oceanography, Cambridge, MA, USA 2Woods Hole Oceanographic Institution, Woods Hole, MA, USA |
|
Electric Field Analysis of a Green Rust Surface Treatment Tank for High/Super Alloys
H.K. Yang1 S.C. Tseng1 1Institute of Mechanical Engineering, National Yunlin University of Science Technology, Taiwan |
|
Electrical and Thermal Analysis of an OLED Module
J. Kundrata1 A. Baric1 1Faculty of Electrical Engineering and Computing, University of Zagreb, Zagreb, Croatia |
|
Electromagnetic Parameters Extraction for Integrated-Circuit Interconnects for Open Three Conductors with Two Levels Systems
S.M. Musa1 M.N.O. Sadiku1 J.D. Oliver1 1Prairie View A&M University, Prairie View, TX, USA |
|
Energetics of Half-Quantum Vortices
K. Roberts1 1University of Illinois at Urbana-Champaign, Urbana, IL, USA |
|
FEM Modeling of Electric Field and Potential Distributions of MV XLPE Cables Containing Void Defect
M. Alsharif1 P. Wallace2 D. Hepburn2 C. Zhou2 1Department of Physics, Faculty of Arts, Sebha University, Sebha, Libya 2School of Engineering & Computing, Glasgow Caledonian University, Glasgow, United Kingdom |
|
FEM-Simulation of a Printed Acceleration Sensor with RF Readout Circuit
H. Schweiger1 T. Göstenkors1 R. Bau1 D. Zielke1 1Dept. Engineering Sciences and Mathematics, University of Applied Sciences Bielefeld, Bielefeld, Germany |
|
Finite Element Analysis of Induced Electroosmotic Flow in Brain Tissue and Application to ex vivo Determination of Enzyme Activity
Y. Ou1 A. Rupert1 M. Sandberg2 S. Weber1 1University of Pittsburgh, Pittsburgh, PA, USA 2University of Gothenburg, Gothenburg, Sweden |
|
Fracture-Matrix Flow Partitioning and Cross Flow: Numerical Modeling of Laboratory Fractured Core Flood
R. Sanaee1 G.F. Oluyemi1 M. Hossain1 B.M. Oyeneyin1 1Robert Gordon University, Aberdeen, United Kingdom |
|
Heat and Mass Transfer in Reactive Multilayer Systems (RMS)
M. Rühl1 G. Dietrich2 E. Pflug1 S. Braun2 A. Leson2 1TU Dresden, Laser and Surface Technology, Dresden, Germany 2IWS Dresden, Fraunhofer Institute for Material and Beam Technology, Dresden, Germany |
|
Heat and Mass Transfer Modeling During Freezing of Foodstuffs
O. Rouaud1 T. Pham2 1LUNAM Université, ONIRIS, CNRS, GEPEA, UMR, Nantes, France 2University of New South Wales, Sydney, Australia |
|
Heat Transfer Modeling of Steam Methane Reforming
E. Carcadea1 M. Varlam1 I. Stefanescu1 1National Research Institute for Isotopic & Cryogenic Technologies, Rm.Vâlcea, Romania |
|
Heat, Air, and Moisture (HAM) Modeling of Historic Windows
H.L. Schellen1 1Eindhoven University Of Technology, Eindhoven, The Netherlands |
|
Humidity Mass Transfer Analysis in Packed Powder Detergents
F. Zonfrilli1 V. Guida1 L. Scelsi1 1Procter & Gamble Italia, Pomezia, Roma, Italy |
|
Hybrid Design Electrothermal Polymeric Microgripper with Integrated Force Sensor
V. Vidyaa1 1Jawahar Engineering College, Affliated to Anna University, Chennai, Tamil Nadu, India |
|
Implementation of an Isotropic Elastic-Viscoplastic Model for Soft Soils Using COMSOL Multiphysics
M. Olsson1 T. Wood1 C. Alén1 1Division of GeoEngineering, Chalmers University of Technology, Gothenburg, Sweden |
|
Innovating New Products using Multiphysics Modeling
|
|
Irrotational Motion of an Incompressible Fluid Past a Wing Section in an Unbounded Region
J. Russell1 1Florida Institute of Technology, Melbourne, FL, USA |
|
Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration
M. Courtois1 M. Carin2 P. LeMasson2 S. Gaied 1 1ArcelorMittal, Global R&D, Montataire, France 2LIMATB Laboratory, Université de Bretagne Sud, Lorient, France |
|
Kinetic Investigation of a Mechanism for Generating Microstructures on Polycrystalline Substrates Using an Electroplating Process
T. Soares1 H. Mozaffari2 H. Reinecke1 1Universität Freiburg, Freiburg im Breisgau, BW, Germany 2Hochschule Furtwangen, Tuttlingen, BW, Germany |
|
Laser Activated Gold Nanorods for the Photothermal Treatment of Cancer
F. Rossi1 F. Ratto1 1CNR - Institute of Applied Physics "Nello Carrara", Sesto Fiorentino, Italy |
|
Launcher Design for Chemical Looping Combustion
F. Gao1 D.W. Greve1 1Carnegie Mellon University, Pittsburgh, PA, USA |
|
Low Pt Cathodes for High Performance PEMFCs: Modeling and Experiments
F. Daouda1 J. Hamelin1 P. Benard1 S. Kumar Natarajan 1 1Insitut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada |
|
Mathematical Modeling of Plastic Deformation Process with an Eulerian Approach
O. Toscanelli1 1Scuola Superiore S. Anna, Pisa, Italy |
|
Microscale Simulation of Nanoparticles Transport in Porous Media for Groundwater Remediation
F. Messina1 M. Icardi1 D. Machisio2 R. Sethi1 1Politecnico di Torino - DIATI, Torino, Italy 2Politecnico di Torino - DISAT, Torino, Italy |
|
Miscible Viscous Fingering: Application in Chromatographic Columns and Aquifers
S. Pramanik1 G. L. Kulukuru1 M. Mishra1 1Indian Institute of Technology Ropar, Rupnagar, Punjab, India |
|
Modeling a Combined Photovoltaic-Thermal Panel
E. Gutierrez-Miravete1 B. Fontenault2 1Rensselaer Polytechnic Institute, Hartford, CT, USA 2General Dynamics-Electric Boat, Groton, CT, USA |
|
Modeling and Optimization of a Mg-Metal Hydride Rectangular Tank in the Hydriding Process
E.I. Gkanas1 S.S. Makridis1 A.K. Stubos2 A. Lopez3 J. Folch4 G. Noriega4 1Materials for Energy Applications Group, Department of Mechanical Engineering, University of Western Macedonia, Greece 2Environmental Technology Laboratory, Institute of Nuclear Technology and Radiation Protection, NCSR “Demokritos”, Greece 3Universidad Politécnica De Cataluña, Barcelona, Spain 4Cidete INGENIEROS, Barcelona, Spain |
|
Modeling Magnetic Configurations for Improved Separations of Magnetic and Non-Magnetic Materials
S. Khushrushahi1 T.A. Hatton1 M. Zahn1 1Massachusetts Institute of Technology, Cambridge, MA, USA |
|
Modeling of Atmosphere Revitalization
R. Coker1 J. Knox1 K. Kittredge1 1NASA - Marshall Space Flight Center, Huntsville, AL, USA |
|
Modeling of Chloride Transport in Cracked Concrete: a 3-D Image–Based Microstructure Simulation
Y. Lu1 E. Garboczi1 D. Bentz1 1National Institute of Standards and Technology, Gaithersburg, MD, USA |
|
Modeling of DC Discharges in Argon at Low Pressures
V. Gorokhovsky1 1Vapor Technologies, Inc., Longmont, CO, USA |
|
Modeling of Supercapacitor
G. Madabattula1 S. K. Gupta1 1Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India |
|
Modeling of the Photo-Mechanical Response of Liquid-Crystal Elastomers
G. Cerretti1 J.-C. Gomez-Lavocat12 K. Vynck1 D.S. Wiersma13 1European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, Sesto Fiorentino, Italy 2The Institute of Photonic Sciences (ICFO), Mediterranean Technology Park, Castelldefels, Spain 3Istituto Nazionale di Ottica (INO), National Research Council (CNR), Florence, Italy |
|
Modeling of the Reduction Stage during the Continuous Refining of Copper in a Packed Bed Reactor
F. Mansilla1 L. Voisin 2 1Advanced Mining Technology Center, Chile University, Santiago, Chile 2Department of Mining Engineering, Advanced Mining Technology Center, Chile University, Santiago, Chile |
|
Modeling Pit Lake Flooding After Mine Closure
S. Jordana1 A. Nardi1 1Amphos 21, Barcelona, Spain |
|
Modeling the Squeeze Flow of a Thermoplastic Composite Tape during Forming
A. Levy1 G.P. Picher Martel1 P. Hubert1 1McGill University, Montreal, QC, Canada |
|
Modeling, Simulation, and Control of Dual Electromagnet Active Magnetic Levitation
A.K. Piłat1 1AGH University of Science and Technology, Kraków, Poland |
|
Modelization of Photoacoustic Trace Gases Sensors
B. Parvitte1 C. Risser1 R. Vallon1 V. Zéninari1 1GSMA - Université de Reims, Reims, France |
|
Multiphase Transport with Large Deformations Undergoing Rubbery-Glassy Phase Transition: Applications to Drying
T. Gulati1 A. Datta1 1Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY, USA |
|
Multiphysics Between Deep Geothermal Water Cycle, Surface Heat Exchanger Cycle and Geothermal Power Plant Cycle
L.W. Wong1 1International Centre for Geothermal Research, Helmholtz Centre Potsdam, GFZ German Research Centre For Geosciences, Telegrafenberg, Potsdam, Germany |
|
Multiphysics FEM Simulations Approach for Development of a MEMS Heat Generator
G. S. Masi1 S. V. De Guido1 G. Montagna2 C. Martucci2 P. M. Congedo1 L. Vasanelli 1 M. G. Manera2 R. Rella2 1Department of Innovation Engineering, University of Salento, Lecce, Italy 2CNR-IMM, Lecce, Italy |
|
Multiphysics Modeling and Simulation of MEMS based Variometer for Detecting the Vertical Speed of Aircraft in Avionics Applications
K. Umapathi1 K. Sukirtha2 C. Sujitha2 K. A. Noushad2 Venkateswaran1 R. Poornima1 R. Yogeswari1 1United Institute of Technology, Coimbatore, Tamil Nadu, India 2Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India |
|
Multiphysics Modeling of a Metal Foam
B. Chinè 13 M. Monno2 1Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy 2Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy 3Instituto Tecnologico de Costa Rica, Cartago, Costa Rica |
|
Multiphysics Modeling of Spring-Supported Thrust Bearings for Hydropower Applications
F.X. Borràs1 J. Ukonsaari2 A. Almqvist1 1Luleå University of Technology, Luleå, Sweden 2Vattenfall Research and Development, Luleå, Sweden |
|
Multiphysics Modeling of Swelling Gels
A. Lucantonio1 P. Nardinocchi1 L. Teresi2 1Università degli Studi La Sapienza, Roma, Italy 2LaMS - Modelling & Simulation Lab, Università degli Studi Roma Tre, Roma, Italy |
|
Multiphysics Modeling of Warm-Air Drying of Potatoes Slices
S. Sandoval Torres1 A. de Lourdes Allier González1 L.L. Méndez Lagunas1 1Instituto Politécnico Nacional, CIIDIR, Oaxaca, Mexico |
|
Multiphysics Modelling of Standing Column Well and Implementation of Heat Pumps Off-Loading Sequence
A. Nguyen1 P. Pasquier1 D. Marcotte1 1 Department of Civil, Geological and Mining Engineering, École Polytechnique de Montréal, Montréal, QC, Canada |
|
Multiphysics Process Simulation of Static Magnetic Fields in High Power Laser Beam Welding of Aluminum
M. Bachmann1 V. Avilov1 A. Gumenyuk1 M. Rethmeier1 1BAM Federal Institute for Materials Research and Testing, Berlin, Germany |
|
Multiphysics Simulation of a Circular-Planar Anode-Supported Solid Oxide Fuel Cell
K. Daneshvar1 A. Fantino1 C. Cristiani1 G. Dotelli1 R. Pelosato1 M. Santarelli2 1Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Milano, Italy 2Politecnico di Torino, Dipartimento di Energetica, Torino, Italy |
|
Multiphysics Simulation of the Electrochemical Finishing of Micro Bores
M. Hackert-Oschätzchen1 M. Kowalick1 G. Meichsner2 A. Schubert12 1Chemnitz University of Technology, Chemnitz, Germany 2Fraunhofer Institute for Machine Tools and Forming Technology IWU, Chemnitz, Germany |
|
Multiphysics Simulations for the Design of Probe-Heads Micro-Needles
A. Corigliano1 A. Courard1 G. Cocchetti1 P. Gagliardi1 L. Magagnin1 R. Vallauri2 D. Acconcia2 1Politecnico di Milano, Milano, Italy 2Technoprobe, Cernusco Lombardone, Italy |
|
Multiphysics Simulations in Automotive Product Development: Concept and Beyond
|
|
Multiphysics Simulations in the Ultrasonic Industry
P.A. Colombo1 1DepQuest, Dalmine, Italy |
|
Multiphysics Software Applications in Reverse Engineering
W. Wang1 K. Genc2 1University of Massachusetts, Lowell, MA, USA 2Simpleware, Exeter, United Kingdom |
|
Nondestructive Testing of Composites Using Model Based Design
E. Nesvijski1 1ACOUSTICS@MBD CONSULTANTS, LLC, Westborough, MA, USA |
|
Numerical Analysis of Conjugate Heat Transfer in Foams
N. Bianco1 R. Capuano1 W.K.S. Chiu2 S. Cunsolo1 V. Naso1 M. Oliviero1 1DETEC, Università degli Studi Federico II, Napoli, Italy 2Department of Mechanical Engineering, University of Connecticut, Storrs, CT, USA |
|
Numerical and Experimental Investigation of Natural Convection Flow of (Sub-) and (Super-) Critical CO2 in Aqueous Phase
R. Khosrokhavar1 G. Elsinga1 R. Farajzadeh2 H. Bruining1 1Delft University of Technology, Delft, The Netherland 2Shell International Global Solutions, Amsterdam, The Netherland |
|
Numerical Calculation of the Dynamic Behavior of Asynchronous Motors with COMSOL Multiphysics
J. Güdelhöfer1 R. Gottkehaskamp1 A. Hartmann1 1Department of Electrical Machines and Electromagnetic Field Theory, University of Applied Sciences Düsseldorf, Düsseldorf, Germany |
|
Numerical Modeling and Performance Optimization Study of a Diaphragm Pump for Medical Application
I. Lupelli1 P. Gaudio1 A. Malizia1 R. Quaranta1 1Department of Industrial Engineering, University of Rome “Tor Vergata”, Roma, Italy |
|
Numerical Modeling of Powder Flow During Coaxial Laser Direct Metal Deposition: Comparison Between Ti-6Al-4V Alloy and 316L Stainless Steel
S. Morville1 M. Carin1 D. Carron1 P. Le Masson1 M. Gharbi2 P. Peyre2 R. Fabbro2 1Université de Bretagne-Sud/UEB-LIMATB, Lorient, France 2PIMM, Arts et Métiers ParisTech, Paris, France |
|
Numerical Simulation of Flow Electrolysers: Effect of Various Geometric Parameters
P. Shukla1 K. K. Singh1 P. K. Gupta 1 S. K. Ghosh1 1Bhabha Atomic Research Centre, Trombay, Mumbai, India |
|
Numerical Simulation of Oil Recovery by Polymer Injection using COMSOL
J. Wegner1 L. Ganzer1 1Clausthal University of Technology, Clausthal, Germany |
|
Numerical Simulation of pH-sensitive Hydrogel Response in Different Conditions
M.K. Ghantasala1 B.O. Asimba1 A. Khaminwa1 K.J. Suthar2 D.C. Mancini3 1Department of Mechanical and Aeronautical Engineering, Western Michigan University, Kalamazoo, MI, USA 2Advanced Photon Source, Argonne National Laboratory, Argonne, IL, USA 3Physical Sciences and Engineering, Argonne National Laboratory, Argonne, IL, USA |
|
Numerical Simulation of Recovery of Light Oil by Medium Temperature Oxidation in Porous Media
N. Khoshenvis Gargar1 A. Mailybaev2 D. Marchesin2 H. Bruining1 1Delft University of Technology, Delft, The Netherlands 2Instituto Nacional de Matematica Pura e Aplicada, Rio de Janeiro, Brazil |
|
Numerical Simulation Study on the Heat and Mass Transfer Through Multi-Layer Textile Assemblies
S.F. Neves1 J.J.B.L.M. Campos1 T.S. Mayor2 1CEFT – Transport Phenomena Research Center, Chemical Engineering Department, Porto University, Porto, Portugal 2CeNTI - Centre for Nanotechology and Smart Materials, Rua Fernando Mesquita, Vila Nova de Famalicão, Portugal |
|
Numerical Simulations of Methane Aromatization with and without a Ceramic Hydrogen Separation Membrane
Z. Li1 C. Kjølseth2 S. Hernandez Morejudo3 R. Haugsrud1 1University of Oslo, Department of Chemistry, FERMiO, Oslo, Norway 2Protia, Oslo, Norway 3University of Oslo, Department of Chemistry, InGAP, Oslo, Norway |
|
Numerical Simulations of Radionuclide Transport through Clay and Confining Units in a Geological Repository using COMSOL
J. Hansmann1 M. L. Sentis1 B. J. Graupner1 A.-K. Leuz1 C. Belardinelli2 1Swiss Federal Nuclear Safety Inspectorate (ENSI), Brugg, Switzerland 2Kantonsschule Solothurn, Solothurn, Switzerland |
|
Numerical Study of a DC Electromagnetic Liquid Metal Pump: Limits of the Model
N. Kandev1 1Institut de recherche d'Hydro-Québec, Shawinigan, QC, Canada |
|
Optimization of Artificial Diffusion Stabilization Techniques and Corresponding Mesh Density Distribution in Drift Dominated Transport of Diluted Species
J. Jadidian1 M. Zahn1 N. Lavesson2 O. Widlund2 K. Borg2 1Massachusetts Institute of Technology, Cambridge, MA, USA 2ABB Corporate Research, Västerås, Sweden |
|
Optimization of Thermal Properties Identification of Complex Thin Films Using MATLAB® and COMSOL Multiphysics
N. Semmar1 B. Wane1 1GREMI, UMR7344, CNRS-University of Orleans, Orléans Cedex 2, France |
|
Optimizing the Performance of MEMS Electrostatic Comb-Drive Actuator with different Flexure Springs
S. Gupta1 T. Pahwa1 R. Bansal1 V. Bansal1 B. Prasad1 D. Kumar1 1Electronic Science Department Kurukshetra University, Kurukshetra, Haryana |
|
Parametric Study of Heavy Oil Recovery by Electromagnetic Heating on a Horizontal Well
M. Liu1 G. Zhao1 1University of Regina, Regina, SK, Canada |
|
Perforation Effect on a Rectangular Metal Hydride Tank for Hydriding and Dehydriding Process
E. Gkanas12 S. Makridis12 E. Kikkinides1 A. Stubos2 1Department of Mechanical Engineering, University of Western Macedonia, Kozani, Greece 2Environmental Laboratory, Institute of Nuclear Technology and Radiation Protection, NCSR 'Demokritos', Agia Paraskevi, Athens, Greece |
|
Pore-Scale Simulation of Two-Phase Flow with Heat Transfer Through Dual-Permeability Porous Medium
H.A. Akhlaghi Amiri1 A.A. Hamouda1 1University of Stavanger, Stavanger, Rogaland, Norway |
|
Pseudo-3D Multiphysics Simulation of a Hydride Vapor Phase Epitaxy Reactor
M. Hackert-Oschätzchen1 M. Penzel1 P. Plänitz2 A. Schubert13 1Chemnitz University of Technology, Chemnitz, Germany 2GWT-TUD, Dresden, Germany 3Fraunhofer Institute for Machine Tools and Forming Technology IWU, Chemnitz, Germany |
|
Reactive Transport Processes in Compacted Bentonite
A.E. Idiart1 M. Pekala1 A. Nardi1 D. Arcos1 1Amphos 21, Barcelona, Spain |
|
Reliability Enhancement of Bio MEMS based Cantilever Array Sensors for Antigen Detection System using Heterogeneous Modular Redundancy
L. S. Sundharam1 1Kumaraguru college of Technology, Coimbatore, Tamil nadu, India |
|
Simulation and Design of an Oven for PET Blow Molding Machines
M. Mor1 C. Seneci1 V. Zacché1 C. Remino1 G. Petrogalli1 D. Fausti1 1Polibrixia, Brescia, Italy |
|
Simulation and Fabrication of Wireless Passive MEMS Pressure Sensor
E.A. Unigarro Calpa1 D.A. Sanz Becerra1 A. Arciniegas2 F. Ramirez1 F. Segura-Quijano1 1Universidad de los Andes, Bogotá, Colombia 2Instituto Barraquer de América, Bogotá, Colombia |
|
Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator
B. Li1 J.H. You1 1Southern Methodist University, Dallas, TX, USA |
|
Simulation of Differential Ion Mobility (DMS) Principle Coupled with Mass Spectrometry in Atmospheric Pressure
F. Sinatra1 T. Wu2 A. Avila2 E. Nazarov1 T. Evans-Nguyen1 J. Wang2 1Draper Laboratory, Tampa, FL, USA 2University of South Florida, Tampa, FL, USA |
|
Simulation Organogenesis in COMSOL: Deforming and Interacting Domains
D. Iber1 D. Menshykau1 1D-BSSE, ETH Zurich, Basel, Switzerland |
|
Solar Cell Cooling and Heat Recovery in a Concentrated Photovoltaic System
M. Cozzini1 1Fondazione Bruno Kessler (FBK), Renewable Energies and Environmental Technologies (REET) Unit, Trento, Italy |
|
Solving a Two-Scale Model for Vacuum Drying by Using COMSOL Multiphysics
S. Sandoval Torres1 1Instituto Politécnico Nacional, CIIDIR, Oaxaca, Mexico |
|
The Spiral RF MEMS Switch in COMSOL Multiphysics
K. M. V. Swamy1 B. G. Sheeparamatti1 G. R. Prakash1 1Basaveshwara Engineering Collage, Bagalkot, Karnataka, India |
|
Theoretical Investigation of CMH Lamps Ignition Properties in Ar/Hg Penning Gas Mixtures
Sz. Beleznai1 I. Maros2 1Budapest University of Technology and Economics, Budapest, Hungary 2General Electric Lighting, GE Hungary KFT, Budapest, Hungary |
|
Theoretical Simulations of Silicon-On-Nothing (SON) Structures
C. Grau Turuelo1 B. Bergmann1 C. Breitkopf1 F. Hoffmann2 L. Brencher2 1Technische Universität Dresden, Dresden, Saxony, Germany 2Infineon Technologies GmbH, Dresden, Dresden, Saxony, Germany |
|
Thermal Analysis of a Piezo-Disk Ultrasound Probe
L. Spicci1 M. Cati1 1Esaote, Firenze, Italy |
|
Thermal Analysis of Packaged Deep Ultraviolet LEDs
A. Dobrinsky1 M. Shatalov1 M. Shur1 R. Gaska1 1Sensor Electronic Technology, Columbia, SC, USA |
|
Thermo-Elastic Response of Cutaneous and Subcutaneous Tissues to Noninvasive Radiofrequency Heating
J. Jimenez-Lozano1 P. Vacas-Jacques1 W. Franco1 1Massachusetts General Hospital and Harvard Medical School, Boston, MA, USA |
|
Thermo-Fluid Dynamics of Flue Gas in Heat Accumulation Stoves: Study Cases
D. Rossi1 P. Scotton1 1University of Padova, Department of Geosciences, Padova, Italy |
|
Thermo-Mechanical Analysis of Composite Material Exposed to Fire
A. Davidy1 1IMI, Ramat Hasharon, Israel |
|
Time-Dependent Thermal Stress and Distortion Analysis During Additive Layer Manufacturing, by Powder Consolidation by Laser Heating
M.S. Yeoman1 J. Sidhu2 11. Continuum Blue Ltd., Tredomen Innovation & Technology Park, Tredomen, Ystrad Mynach, United Kingdom 2BAE Systems, Advanced Technology Centre, Bristol, United Kingdom |
|
Toward an Evaluation of the Tonal Colouring of the Japanese koto using COMSOL Multiphysics and Acoustics Module
K. Coaldrake1 1The University of Adelaide, Adelaide City, South Australia, Australia |
|
Towards Rotordynamic Analysis with COMSOL Multiphysics
M. Karlsson1 1ÅF, Stockholm, Sweden |
|
Two-Phase Flow and Multiphysics Simulations in COMSOL
|
|
Using COMSOL for Optimal Design of Engineering Barriers of Nuclear Waste Repositories
L.M. de Vries1 A. Nardi1 A.E. Idiart1 P. Trinchero1 J. Molinero1 F. Vahlund2 H. von Schenck2 1Amphos 21, Barcelona, Spain 2Swedish Nuclear Fuel and Waste Management, Stockholm, Sweden |
|
Using Temperature Signals to Estimate Geometry Parameters in Fractured Geothermal Reservoirs
F. Maier1 P. Oberdorfer1 I. Kocabas2 I. Ghergut1 M. Sauter1 1Dpt. Applied Geology, Center of Geosciences, Georg-August-University, Göttingen, Germany 2Petroleum and Natural Gas Engineering Department Batman, Batman University, Batman, Turkey |
|
Viscoelastic Mechanical Analysis for High Temperature Process of a Soda-Lime Glass Using COMSOL Multiphysics
R. Carbone1 1Material and Production Engineering Department, University of Naples “Federico II”, Naples, Italy |
|
Wind Flow Modeling of Area Surrounding the Case Western Reserve University Wind Turbine
M. Fernandes1 D. Matthiesen1 1Case Western Reserve University, Cleveland, OH, USA |
Share it on Social Media:
