Optimization and Inverse Methods
|
An Integrated Numerical-Experimental Approach for Heat Transfer Analysis of Industrial Furnaces
G. Petrone1 A. Adorisio2 S. Adorisio2 M. Calderisi3 A. Cecchi3 M. Scionti1 F. Turchi3 1BE CAE & Test, Catania, Italy 2Gadda Industrie, Ivrea, Italy 3Laboratori Archa, Pisa, Italy |
|
AO@SW with Vrala: Simulations and Tests
C. Del Vecchio1 G. Agapito1 L. Carbonaro1 F. Marignetti2 E. De Santis2 Y. Coia2 1National Institute for Astrophysics, Arcetri Astrophysical Observatory, Firenze, Italy 2University of Cassino and Southern Latium, Cassino, Italy |
|
Design Geometry Optimization of Vertical Cracks in Thermal Barrier Coatings from Simulated Thermal and Mechanical Behavior
C. Heveran1 J. Xu1 D. Cole2 S. Basu1 V. Sarin1 1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA 2Department of Mechanical Engineering, Boston University, Brookline, MA, USA |
|
Development towards Non-invasive Breast Cancer Imaging using Novel Estrogen Conjugates Fluorescent Dye
Francis .K. J.1 I. Jose1 1Christ University,Bangalore, Karnataka,India |
|
Electromagnetic Actuators Modeling, Simulation and Optimization
O. Craciun1 V. Biagini1 G. Mechler1 G. Stengel1 C. Reuber2 A. van der Linden3 1ABB Corporate Research, Ladenburg, Germany 2ABB Calor Emag, Hanau, Germany 3COMSOL, Göttingen, Germany |
|
Geometric Modeling and Numerical Simulation of Airfoil Shapes Using Integrated MATLAB® and COMSOL Multiphysics
A. Safari1 H. Lemu G.1 H. Severson1 1University of Stavanger, Stavanger, Norway |
|
Glass Windscreen Forming Optimization by Finite Element Analysis Using COMSOL Multiphysics
R. Carbone1 1Material and Production Engineering Department, University of Naples “Federico II”, Naples, Italy |
|
Highly Concentrated Solar Radiation Measurement by Means of an Inverse Method
L. Mongibello1 N. Bianco2 R. Fucci1 F. Moscariello2 1ENEA - Italian National Agency for New Technologies, Energy and Sustainable Economic Development, Portici, Italy 2DETEC - Università degli Studi di Napoli Federico II, Napoli, Italy |
|
Lithography-Patterning-Fidelity-Aware Electron-Optical System Design Optimization by Using COMSOL Multiphysics with MATLAB®
Sheng-Yung Chen 1 Kuen-Yu Tsai 1 1Dept. of Electrical Engineering, National Taiwan University, Taipei, Taiwan |
|
Modeling, Simulation, and Control of Dual Electromagnet Active Magnetic Levitation
A.K. Piłat1 1AGH University of Science and Technology, Kraków, Poland |
|
Nanoscale Structure Design in EM Fields Using COMSOL Multiphysics
J. Yoo1 H. Soh2 J. Choi3 S. Song4 1Department of Mechanical Engineering, Yonsei University, Korea 2Hyundai Motor Co., Korea 3Samsung Electronics Co., Ltd., Korea 4Mando Co., Korea |
|
Numerical Optimization Technique for the Optimal Design of the Surface Plasmon Grating Coupler
C. Caiseda1 V. Aksyuk2 I. Griva3 1Inter American University of Puerto Rico, Bayamon, PR, USA 2National Institute of Standards and Technology, Gaithersburg, MD, USA 3George Mason University, Fairfax, VA, USA |
|
Optimized Illumination Directions of Single-Photon Detectors Integrated with Different Plasmonic Structures
M. Csete1 Á. Sipos1 A. Szalai1 G. Szabó1 1Department of Optics and Quantum Electronics, University of Szeged, Szeged, Hungary |
Share it on Social Media:
