Structural Mechanics and Thermal Stresses
|
A Computational Approach for Optimizing the First Flyer Using COMSOL Multiphysics
A.H. Aziz1 H. Pourzand1 A.K. Singh1 1Pennsylvania State University, University Park, PA, USA |
|
A Multiphysics Approach to the Modeling of Biological Prosthetic Heart Valves
A. Avanzini1 D. Battini1 M. Berardi1 1Università degli Studi di Brescia, Brescia, Italy |
|
A Parametric Study on the Dynamic Behavior of Cable Supported Bridges Under Moving Loads Affected by Accidental Failure Mechanisms
P. Lonetti1 A. Pascuzzo1 R. Sarubbo1 1Department of Structural Engineering, University of Calabria, Rende, Cosenza, Italy |
|
A Study of Geometrical Shape of Central Plate in Electrostatic Actuation
K. M. V. Swamy1 B. G. Sheeparamatti1 G. R. Prakash 1 1Department of Electronics and Communication, Basaveshwara Engineering College, Bagalkot, Karnataka, India |
|
A Study of the Effects of Mounting Supports, and Dissipation on a Piezoelectric Quartz Double-Ended Tuning Fork Gyroscope
G. Choi1 Y. Yong1 1Rutgers University, New Brunswick, NJ, USA |
|
An Innovative Solution for Water Bottling Using PET
D. Scardigno1 A. Castellano1 P. Foti1 A. Fraddosio1 S. Marzano1 M.D. Piccioni1 1DICAR, Politecnico di Bari, Bari, Italy |
|
Analysis of Multiphysics Problems Related to Energy Piles
E. Evgin1 J.A.I. Sedano 1 Z. Fu1 1University of Ottawa, Ottawa, ON, Canada |
|
Assessment of Anterior Spinal Artery Blood Flow following Spinal Cord Injury
M. Alshareef1 A. Alshareef2 V. Krishna3 M. Kindy3 T. Shazly4 1College of Medicine, Medical University of South Carolina, Charleston, SC, USA 2Department of Biomedical Engineering, Duke University, Durham, NC, USA 3Department of Neurosurgery, Medical University of South Carolina, Charleston, SC, USA 4Department of Mechanical Engineering, University of South Carolina, Columbia, SC, USA |
|
Bone Remodeling Following Total Hip Replacement: Short Stem Versus Long Stem Implants
M.S. Yeoman1 A. Cizinauskas1 C. Lowry2 G. Vincent3 S. Collins3 D. Simpson3 1Continuum Blue, Tredomen, Ystrad Mynach, United Kingdom 2Corin Group, Cirencester, United Kingdom 3Imoprhics, Manchester, United Kingdom |
|
COMSOL Simulations for Steady State Thermal Hydraulics Analyses of ORNL’s High Flux Isotope Reactor
P.K. Jain1 V.B. Khane2 J.D. Freels1 1Oak Ridge National Laboratory, Oak Ridge, TN, USA 2Missouri University of Science and Technology, Rolla, MO, USA |
|
Design and Nuclear-Safety Related Simulations of Bare-Pellet Test Irradiations for the Production of Pu-238 in the High Flux Isotope Reactor Using COMSOL
J.D. Freels1 P.K. Jain1 R.W. Hobbs1 1Oak Ridge National Laboratory, Oak Ridge, TN, USA |
|
Design and Simulation of MEMS Based Gyroscope for Vestibular Prosthesis
R. Nithya1 K. Kavitha1 R. K. Shahana1 A. Gupta1 M. Alagappan1 1Department of Biomedical Engineering, PSG College of Technology, Coimbatore, Tamilnadu, India |
|
Design and Simulation of MEMS based Micro Pressure Sensor
P. Acharya1 1B.V.Bhoomaraddi College of Engineerring & Technology, Hubli, Karnataka, India |
|
Design Geometry Optimization of Vertical Cracks in Thermal Barrier Coatings from Simulated Thermal and Mechanical Behavior
C. Heveran1 J. Xu1 D. Cole2 S. Basu1 V. Sarin1 1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA 2Department of Mechanical Engineering, Boston University, Brookline, MA, USA |
|
Design of a Pressure Sensor to Monitor Teeth Grinding
I.M. Abdel-Motaleb1 K. Ravanasa1 K.J. Soderholm2 1Department of Electrical Engineering, Northern Illinois University, DeKalb, IL, USA 2Department of Restorative Dental Sciences, College of Dentistry, University of Florida, Gainesville, FL USA |
|
Design of MEMS based Polymer Microphone for Hearing Aid Application
V. S. Nagaraja1 Ramanuja H. S.1 Deepak K1 S. L. Pinjare1 1Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Bangalore, Karnataka, India |
|
Designing and Simulating the Performance Analysis of Piezoresistive Fluid Flow Pressure Sensor
K. PraveenKumar1 P. Suresh1 K. Subash1 M. Alagappan1 A. Gupta1 1PSG College of Technology, Coimbatore, Tamil Nadu, India. |
|
Designing Materials for Mechanical Invisibility Cloaks
P. Olsson1 F. Larsson1 A. Khlopotin1 S. Razanica1 1Chalmers University of Technology, Gothenburg, Sweden |
|
Development and Production of a Box for Storage and Shipping of HDIs in the Upgrade of the CMS Experiment
F. Noto1 S. Costa2 N. Giudice2 F. Librizzi3 A. Rapicavoli2 M.A. Saizu4 V. Sparti3 1Instituto Nazionale Fisica Nucleare, Sezione di Catania, Catania, Italy; Dipartimento di Fisica ed Astronomia, Università di Catania, Catania, Italy 2 Dipartimento di Fisica ed Astronomia, Instituto Nazionale Fisica Nucleare, Sezione di Catania, Catania, Italy; Università di Catania, Catania, Italy 3Instituto Nazionale Fisica Nucleare - Sezione di Catania, Catania, Italy 4Horia Hulubei National Institute of Physics and Nuclear Engineering, Bucharest-Magurele, Romania |
|
Earth Pressure as a Boundary Condition to Bridge Piers and Abutments
M. Quinn1 D. Whitlow1 O.D.S. Taylor1 M.H. McKenna1 1 Engineer Resource and Development Center, United States Army Corps of Engineers, Vicksburg, MS, USA |
|
Effects of Fluid and Structural Forces on the Dynamic Performance of High Speed Rotating Impellers.
C. Thiagarajan1 G. Shenoy2 B. S. Shenoy3 1ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, India. 2Department of Mechanical & Manufacturing Engineering, Manipal Institute of technology, Manipal, India 3Department of Aeronautical & Automobile Engineering, Manipal Institute of Technology, Manipal, India |
|
Elasto-Plastic FEM Models Explain the Emplacement of Shallow Magma Intrusions in Volcanic Complexes
A. Bistacchi1 1Università degli Studi di Milano Bicocca, Milano, Italy |
|
Elastoplastic Deformation in a Wedge-Shaped Plate Caused by a Subducting Seamount
M. Ding1 J. Lin2 1MIT/WHOI Joint Program in Oceanography, Cambridge, MA, USA 2Woods Hole Oceanographic Institution, Woods Hole, MA, USA |
|
Evaluation of Low-Cycle-Fatigue Life of Solder Joints in Surface Mounting Power Devices by Finite Element Modeling
N. Delmonte1 F. Giuliani1 M. Bernardoni2 P. Cova1 1Dipartimento di Ingegneria dell'Informazione, Università degli Studi di Parma, Parma, Italy 2CDTR - Centre for Device Thermography and Reliability, H. H. Wills Dept. of Physics, University of Bristol, Bristol, United Kingdom |
|
Finite Element Analysis of a Fiber Bragg Grating Accelerometer for Performance Optimization
N. Basumallick1 A. Ghosh1 P. Biswas1 K. Dasgupta1 S. Bandyopadhyay1 1Fiber Optics Laboratory, Central Glass and Ceramic Research Institute, Kolkata, West Bengal, India |
|
Finite Element Convergence and Speed-Up Studies Using COMSOL Multiphysics and LiveLink™ for MATLAB® with Large Assembly Models
H. Pourzand1 A.H. Aziz1 A. Singh1 1Pennsylvania State University, State College, PA, USA |
|
Finite Element Solution of Nonlinear Transient Rock Damage with Application in Geomechanics of Oil and Gas Reservoirs
S. Enayatpour1 T. Patzek1 1The University of Texas at Austin, Austin, TX, USA |
|
Fretting Wear and Fatigue Analysis of a Modular Implant for Total Hip Replacement
M.S. Yeoman1 A. Cizinauskas1 D. Rangaswamy1 1Continuum Blue, Tredomen, Ystrad Mynach, United Kingdom |
|
Glass Windscreen Forming Optimization by Finite Element Analysis Using COMSOL Multiphysics
R. Carbone1 1Material and Production Engineering Department, University of Naples “Federico II”, Naples, Italy |
|
Investigation of Hydraulic Fracture Re-Orientation Effects in Tight Gas Reservoirs
B. Hagemann1 J. Wegner1 L. Ganzer1 1Clausthal University of Technology, Clausthal-Zellerfeld, Germany |
|
Investigation of the Effect of Spinal Defects on Spondylolysis and Stress Fracture of Vertebral Bodies
M.S. Yeoman1 C. Quah2 A. Cizinauskas1 K. Cooper1 D. McNally5 B. Boszczyk2 1Continuum Blue, Tredomen, Ystrad Mynach, United Kingdom 2The Centre for Spinal Studies and Surgery, Queen’s Medical Centre, Nottingham, United Kingdom 5Bioengineering Research Group, Faculty of Engineering, The University of Nottingham, Nottingham, United Kingdom |
|
Load Cell Design Using COMSOL Multiphysics
A. Marchidan1 T. Sullivan1 J. Palladino1 1Trinity College, Hartford, CT, USA |
|
Material Selection and Computational Analysis on DOHC V16 Engine’s Mounting Bracket Using COMSOL Multiphysics
M. V. A. Nag1 1G.R.I.E.T., Hyderabad, AP, India |
|
Mathematical Modeling of Plastic Deformation Process with an Eulerian Approach
O. Toscanelli1 1Scuola Superiore S. Anna, Pisa, Italy |
|
Mechanical Model of RF MEMS Capacitor Structures
R. Chatim1 1University of Kassel, Kassel, Germany |
|
Modeling and Experimental Verification of the Power Transfer and Thermal Characteristics of Piezoelectric Transformers Subjected to Combined Mechanical and Electrical Loading
S. Tuncdemir1 W.M. Bradley2 1Solid State Ceramics, Williamsport, PA, USA 2QorTek, Williamsport, PA, USA |
|
Modeling Fluid-Induced Porous Scaffold Deformation
J. Podichetty Thribhuvan1 S.V. Madihally1 1Oklahoma State University, Stillwater, OK, USA |
|
Modeling of Silicon Piezoresistive Pressure Sensor: Application to Prevent Some Diabetes Complications
F. Kerrour1 A. Beddiaf1 M. Benabbas-Marir1 1MODerNa Laboratory, University Mentouri, Constantine, Algeria |
|
Modeling of the Photo-Mechanical Response of Liquid-Crystal Elastomers
G. Cerretti1 J.-C. Gomez-Lavocat12 K. Vynck1 D.S. Wiersma13 1European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, Sesto Fiorentino, Italy 2The Institute of Photonic Sciences (ICFO), Mediterranean Technology Park, Castelldefels, Spain 3Istituto Nazionale di Ottica (INO), National Research Council (CNR), Florence, Italy |
|
Modeling of Ultrasonic Fatigue-Life Testing Machine
D. Dimitrov1 V. Mihailov1 B. Kostov1 1Technical University of Varna, Varna, Bulgaria |
|
Modeling the Temperature-Dependent Dynamic Behavior of a Timber Bridge with Asphalt Pavement
B. Weber1 1Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland |
|
Modelling of Pressure Profiles in a High Pressure Chamber using COMSOL Multiphysics
P. S. Rao1 C. K. Chandra1 1Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, West Bengal, India |
|
Multiphase Transport with Large Deformations Undergoing Rubbery-Glassy Phase Transition: Applications to Drying
T. Gulati1 A. Datta1 1Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY, USA |
|
Multiphysics and Simulation of MEMS based Bolometer for Detecting the Radiations in Nuclear Power Plants
K. Umapathi1 S. Swetha2 K. Ranjitha2 K. Vinodh2 K. Deebiga1 R. Harisudarsan1 1United Institute of Technology, Coimbatore, TamilNadu, India 2Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India |
|
Multiphysics Modeling and Simulation of MEMS based Variometer for Detecting the Vertical Speed of Aircraft in Avionics Applications
K. Umapathi1 K. Sukirtha2 C. Sujitha2 K. A. Noushad2 Venkateswaran1 R. Poornima1 R. Yogeswari1 1United Institute of Technology, Coimbatore, Tamil Nadu, India 2Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India |
|
Multiphysics Modeling of Spring-Supported Thrust Bearings for Hydropower Applications
F.X. Borràs1 J. Ukonsaari2 A. Almqvist1 1Luleå University of Technology, Luleå, Sweden 2Vattenfall Research and Development, Luleå, Sweden |
|
Multiphysics Simulations for the Design of Probe-Heads Micro-Needles
A. Corigliano1 A. Courard1 G. Cocchetti1 P. Gagliardi1 L. Magagnin1 R. Vallauri2 D. Acconcia2 1Politecnico di Milano, Milano, Italy 2Technoprobe, Cernusco Lombardone, Italy |
|
Multiphysics Software Applications in Reverse Engineering
W. Wang1 K. Genc2 1University of Massachusetts, Lowell, MA, USA 2Simpleware, Exeter, United Kingdom |
|
Numerical Modeling and Performance Optimization Study of a Diaphragm Pump for Medical Application
I. Lupelli1 P. Gaudio1 A. Malizia1 R. Quaranta1 1Department of Industrial Engineering, University of Rome “Tor Vergata”, Roma, Italy |
|
Numerical Simulation of Temperature and Stress Fields in the Rock Heating Experiment
P. Rálek1 M. Hokr1 1Technical University in Liberec, Liberec, Czech Republic |
|
Optimal Placement of Piezoelectric Plates to Control Multimode Vibrations of Rotating Beam
F. Botta1 D. Dini2 S. Gentili1 G. Cerri1 1Dipartimento di Ingegneria Meccanica e Industriale, Università degli Studi di Roma Tre, Roma, Italy 2Department of Mechanical Engineering, Imperial College London, London, United Kingdom |
|
Optimized Cantilever-to-Anchor Configurations of Buckled Cantilever Plate Structures for Transducer Applications
A. Arpys Arevalo Carreno1 D. Conchouso Gonzalez1 I.G. Foulds1 1King Abdullah University of Science and Technology, Thuwal, Mecca, Kingdom of Saudi Arabia |
|
Reliability Enhancement of Bio MEMS based Cantilever Array Sensors for Antigen Detection System using Heterogeneous Modular Redundancy
L. S. Sundharam1 1Kumaraguru college of Technology, Coimbatore, Tamil nadu, India |
|
Ribbon Formation in Twist-Nematic Elastomers
L. Teresi1 V. Varano1 1LaMS - Modelling & Simulation Lab, Università degli Studi Roma Tre, Roma, Italy |
|
Simulation and Analysis of Two Fans Air Speed Match Design in Off-Road Mine Tract Generator Using COMSOL
Y. Shen1 D. Wu1 1Beijing University of Science & Technology, Beijing, China |
|
Simulation of a Seal
V. Viola1 1CARCO, Basiano, Milano, Italy |
|
Simulation of an Ultrasonic Immersion Test for the Characterization of Anisotropic Materials
A. Castellano1 P. Foti1 A. Fraddosio1 S. Marzano1 M.D. Piccioni1 D. Scardigno1 1DICAR, Politecnico di Bari, Bari, Italy |
|
Simulation of Impact Damage in a Composite Plate and Its Detection
V. Pavelko1 I. Pavelko1 M. Smolyaninovs1 H. Pffeifer2 M. Wevers2 1Riga Technical University, Riga, Latvia 2Catholic University Leuven, Leuven, Belgium |
|
Stress and Fatigue Analysis of Subsea Umbilical and Cable Systems
M.S. Yeoman1 V. Sivasailam1 T. Poole3 S. Ingham3 1Continuum Blue, Tredomen, Ystrad Mynach, United Kingdom 3JDR Cable Systems, Littleport, Cambridgeshire, United Kingdom |
|
Structural Analysis of a Pressure Sensor for High Temperature Environments
S.V. De Guido1 G.S. Masi1 P. Vladimirovich Miodushevsky1 L. Vasanelli1 1Department of Innovation Engineering, University of Salento, Lecce, Italy |
|
Study of Thermal Behavior of Thermoset Polymer Matrix Filled with Micro and Nanoparticles
B. Reine1 J. Di-Tomaso2 G. Dusserre1 P. Olivier1 1Université de Toulouse, UPS, INSA, Mines Albi, ISAE, ICA, IUT, Dept. GMP, Toulouse Cedex, France 2RESCOLL - Société de Recherche, Pessac Cedex, France |
|
The Non Linear Behavior of the Microplane Model in COMSOL
A. Frigerio1 1RSE, Milano, Italy |
|
The Refinement of the Contact Compression Ring Chamfer for Race Engine Conditions
M. Dickinson1 N. Renevier2 W. Ahmed3 1Racing to Research team, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, United Kingdom 2The Jost Institute, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, United Kingdom 3Institute of Nanotechnology and Bioengineering, School of Computing, Engineering and Physical Sciences, University of Central Lancashire, Preston, United Kingdom |
|
Thermal Model for Single Discharge EDM Process Using COMSOL Multiphysics
K. Gajjar1 U. Maradia2 K. Wegener2 1Indian Institute of Technology Bombay, Mumbai, Maharshtra, India 2Institute for Process Tools and Manufacturing (IWF), Zurich, Switzerland |
|
Time-Dependent Thermal Stress and Distortion Analysis During Additive Layer Manufacturing, by Powder Consolidation by Laser Heating
M.S. Yeoman1 J. Sidhu2 11. Continuum Blue Ltd., Tredomen Innovation & Technology Park, Tredomen, Ystrad Mynach, United Kingdom 2BAE Systems, Advanced Technology Centre, Bristol, United Kingdom |
|
Towards Rotordynamic Analysis with COMSOL Multiphysics
M. Karlsson1 1ÅF, Stockholm, Sweden |
|
Two- and Three-Dimensional Holey Phononic Crystals with Unit Cells of Resonators
Y.F. Wang12 Y.S. Wang1 L. Wang2 1Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing, China 2Department of Mechanical Engineering, Østfold University College, Halden, Norway |
|
Viscoelastic Mechanical Analysis for High Temperature Process of a Soda-Lime Glass Using COMSOL Multiphysics
R. Carbone1 1Material and Production Engineering Department, University of Naples “Federico II”, Naples, Italy |
|
VLSI Layout Based Design Optimization of a Piezoresistive MEMS Pressure Sensors using COMSOL Multiphysics
R. Komaragiri1 Sarath. S.1 N. Kattabomman1 1NIT Calicut, Kozhikode, Kerala |
|
µHeater on a Buckled Cantilever Plate for Gas Sensor Applications
A. Arpys Arevalo Carreno1 E. Byas1 I.G. Foulds1 1King Abdullah University of Science and Technology, Thuwal, Mecca, Kingdom of Saudi Arabia |
Share it on Social Media:
