Bell Laboratories, Lucent Technologies
The flexibility of COMSOL Multiphysics enables a variety of computational approaches to be applied towards solving electromagnetic problems across the whole spectrum. I will describe techniques for studying resonant electromagnetic interactions in a range of structures, including materials with negative electric permittivity (metals at optical frequencies), and small microwave resonators and ...
MEDRAD Innovations, One MEDRAD Drive, Indianola
This talk will highlight, through several case studies, COMSOL Multiphysics' utility as a design tool, system analysis tool, and an aid in applied research throughout MEDRAD's product development cycle (the integrated-Product Development Process™), from applied research to product validation. Specific examples shall include the analysis of a shielding design to prevent spurious interference ...
Bentz, D.N., Zhang, J., Bloomfield, M., Lu, J-Q., Gutmann, R.J., Cale, T.S.
Rensselaer Polytechnic Institute
One of the key issues in developing higher density microelectronics devices is the impact of the stresses induced by thermal expansion mismatches of the materials used. We have examined, using FEMLAB, the stresses due to interwafer copper interconnects embedded in multilayer structures created by bonding two wafers using an organic low-k dielectric glue, benzocylcobutene (BCB). This work ...
Zampolli, M., Tesei, A., Jensen, F.B.
NATO Undersea Research Centre, 19138 La Spezia, Italy
Acoustic waves are used in SONAR systems for the detection and classification of objects which may be swimming in the water column, proud on the seafloor, or buried below the sediment. In some applications, such as low frequency detection and classification of structurally complex objects immersed in a fluid, signal processing techniques must be aided by a-priori model based knowledge of the ...
Deibel, J.A., Wang, K., Escarra, M.D., Mittleman, D.M.
Department of Electrical and Computer Engineering, Rice University, Houston, TX, USA
The terahertz (THz) region of the electromagnetic spectrum (100 GHz to 10 THz) remained relatively unexplored until developments in ultrafast laser technology provided techniques for the generation and detection of THz radiation. Recently, simple metal wires were found to be effective terahertz waveguides that exhibited very low loss and dispersion. The THz radiation propagates along the surface ...
EPM-MADYLAM laboratory, CNRS, Saint Martin d’Hères, France
The cold crucible is a tool which is frequently used for induction heating applications for the elaboration of materials by middle or high frequency magnetic field. This crucible is made of copper sectors assembled together to form the container in which the electroconductive material is molten. Each sector is water cooled, which keeps the crucible cold when the material is heated and molten ...
Strauss, D.J., Trenado, C.
Institute of New Materials, Saarbrücken
Mathematical modeling at the Institute of New Materials has played a crucial role in supporting the manufacturing and design of new technologies of nanomaterials, whose applications range from transportation, electronics and optics engineering to environmental sciences. In this paper, we focus our attention to two mathematical models together with their corresponding FEMLAB simulations: The ...
Charles Stark Draper Laboratory
Micromechanical resonators are used in a wide variety of applications, including inertial sensing, chemical and biological sensing, acoustic sensing, and microwave transceivers. Despite the distinct design requirements for each of these applications, a ubiquitous resonator performance parameter emerges. This is the resonator’s Quality factor (Q), which describes the mechanical energy damping. ...
Castaings, M.1, Predoi, M.V.2, Hosten, B.1 1 Laboratoire Mécanique Physique, Univ. Bordeaux 1, UMR CNRS 5469, Talence, France
2 Catedra de Mecanica, Universitatea Politehnica Bucuresti, Bucuresti, Romania
Wave propagation in elastic waveguides is a problem of constant interest from the last decades. Several numerical approaches exist. The most intuitive uses time-marching routines that solve the equations of dynamic equilibrium and supply displacements of the structure nodes as time functions. This procedure is usually time and memory consuming due to huge number of temporal iterations required ...
Tijerino Monge, T., Carmona Infante, V.
This model studies a portion of the vascular system of a normal person, in particular the left ventricle and the mitral valve of the heart. The flowing blood applies pressure to the ventricle before, after and specially during the contraction process of the heart, thereby deforming the structure.