C. Gavrila and I. Lancranjan
Technical University of Civil Engineering Bucharest, Bucharest, Romania
Advanced Study Centre, National Institute for Aerospace Research “Elie Carafoli”, Bucharest, Romania
Fiber optic sensors can measure a large range of physical, chemical and environmental variables such as temperature, pressure, shape, position, chemical concentration, moisture, etc. Fiber optic sensors provide measurements in applications where the conventional electrical based sensors cannot be used, due to measurement requirements such as extreme temperature, small size, high sensor count, or ...
P.A. Wallace, M. Alsharif, D.M. Hepburn, and C. Zhou
Department of Energy Systems Engineering, Glasgow Caledonian University, Glasgow, United Kingdom
Two simulations of the performance of a Paper Insulated Lead Covered (PILC) Medium Voltage (MV) underground cable are presented. The first presents the thermal response of a cable, over seven days, to a realistic load with a diurnal variation. The second concentrates on the variation of the electric field stress within the cable over a single AC cycle. The effects of a void defect within the ...
N. Fillot, T. Doki-Thonon, and W. Habchi
CNRS, INSA, Université de Lyon, Lyon, France
Department of Industrial and Mechanical Engineering, Lebanese American University, Byblos, Lebanon
A ball is in contact with a plane, and a lubricant separates the two surfaces to decrease friction during their relative motion. To avoid wear, the lubricant film thickness should be higher than the surface roughness. The goal of this paper is to show how it is possible to solve efficiently the problem of elastohydrodynamics lubrication with COMSOL Multiphysics®, using a PDE (Partial ...
A. Montisci and R. Pintus
Department of Electrical and Electronic Engineering, University of Cagliari, Cagliari, Italy
The aim of the proposed device is to overcome the typical drawbacks of MHD generators, such as the needed of a very high external magnetic field, the strong dependency of the efficiency by the temperature of the fluid, and the deterioration of the electrodes that are in contact with the high temperature plasma. In fact the proposed device does not need an external magnetic fluid to work, but it ...
C. Caruso, P. Lonetti, and A. Manna
Department of Structural Engineering, University of Calabria, Arcavacata di Rende, CS, Italy
A generalized model to predict dynamic crack propagation in fiber composite structures is proposed. The proposed approach is based on a generalized formulation based on the Fracture Mechanics approach and Moving mesh methodology. Consistently to the Fracture Mechanics, the crack propagation depends from the energy release rate and its mode components, which are calculated by means of the ...
Georg-August University, Göttingen, Germany
Viscous fingering is a topic of interest since the beginning of computational fluid dynamics. Here we focus on the classical constellation of miscible displacement, as it has been investigated in Hele-Shaw cells. A temperature or salinity front is entering with a fluid that has a different viscosity. The pure 1D flow is destabilized by the Saffman-Taylor instability. Using COMSOL Multiphysics® ...
L. Armellin, F. Gatelli, and G. Tanghetti
R&D Department, Metelli S.p.A., Cologne, BS, Italy
Ball joints are widely used in many applications. This paper describes the contact and kinematic analysis of an Rzeppa type constant-velocity joint (CV-joint). Starting from a conveniently simplified 3D model, at fixed joint angle of 45°, a CV-joint made of all “generic steel” components has been studied. Considering only a “perfect” geometry (i.e. not affected by ...
U. Bardi, C. Borri, A. Fossati, A. Lavacchi, and I. Perissi
Dipartimento di Chimica, Università degli Studi di Firenze, Sesto Fiorentino, FI, Italy
A Finite element model of plasma sprayed TBC’s was developed to estimate the stress induced by thermal cycling experiments. A heat transfer analysis was performed to evaluate the temperature distribution on the specimen during the cooling under an impinging air jet; temperature measurements performed with an infrared pyrometer on the cooled samples show good agreement with the evaluated ...
Screening Effects in Probing the Electric Double Layer by Scanning Electrochemical Potential Microscopy
R.F. Hamou, P.U. Biedermann, A. Erbe, and M. Rohwerder
Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf, Germany
A computational method is developed to study probing the electric double layer by Scanning Electrochemical Potential Microscopy. The model is based on a modified Poisson- Boltzmann equation, which takes into account steric effects. We investigated the effect of metallic apex protrusion and the Open Circuit Potential (OCP) of the tip on the probed potential. A clear electrostatic screening effect ...
V.M. Rodriguez-Zermeno, M.P. Sørensen, N.F. Pedersen, N. Mijatovic, and A.B. Abrahamsen
DTU Mathematics, Lyngby, Denmark
DTU Electrical Engineering, Lyngby, Denmark
Materials Research Division, Risø, DTU, Roskilde, Denmark
This work presents a method to calculate AC losses in thin conductors such as the commercially available second generation superconducting wires through a multiscale meshing technique. The main idea is to use large aspect ratio elements to accurately simulate thin material layers. For a single thin superconductor, several standard test cases are simulated including transport current, externally ...