Copper Layer on Silica Glass
Model ID: 452
In this time-dependent model, a silica block of glass, coated with a thin copper layer is subjected to a heat flux. Copper is a highly conductive material, while the silica glass is of poor thermal conductivity, which sets up an highly-varied temperature differential. The model must therefore account for a highly conductive layer. This is done, using a the Highly Conductive Layer feature in the Heat Transfer interface from the Heat Transfer Module. For comparison, we’ve included the same model with a copper layer as a 2D domain. In this case, the copper domain requires a very dense mesh.
|Surface plot of the temperature after ten seconds.|