This model demonstrates the Lithium-Ion Battery interface for studying the discharge and charge of a lithium-ion battery for a given set of material properties. The geometry is in one dimension and the model is isothermal. Battery...
In this model, a point source generates a pressure wave in the Sound Brick, a testbench car interior. The sound level is measured at another point and at a range of frequencies high enough that a good mesh resolution is required to...
When cooking food, such as a patty, in convection ovens there is a trade off in the heating method. If the patty is heated at a low oven temperature the cooking is slow and the patty dries out, resulting in a poor taste. If the patty is...
The inductor is a common component in a variety of electrical devices. Its applications include power transformation and measurements, and it can also be used together with capacitors to create oscillators. In small devices with many...
This model demonstrates the use of moving meshes in the application of copper electrodeposition on circuit boards. In these environments, the presence of cavities or 'trenches' are apparent. The model makes use of the Tertiary,...
The elastic cantilever beam is one of the elementary structures used in MEMS designs. This model shows the bending of a cantilever beam under an applied electrostatic load. The model solves the deformation of the beam under an applied...
This model refers to a portion of the vascular system of a young child - the upper part of the aorta artery. The blood vessels are embedded in a biological tissue (the cardiac muscle) and, during the flow of blood, pressure is applied to...
Lasers are commonly used to achieve precision heating or welding. The beam often moves over the surface of the substrate. One difficulty with modeling a laser heat source is the fact that the beam is very narrow (nm-mm). Another is...
Inkjet printers are attractive tools for printing text and images because they combine low cost and high resolution with acceptable speed. Designers can vary several parameters to modify a printer’s performance. Simulations can be...
The dipole antenna is one of the most straightforward antenna configurations. It can be realized with two thin metallic rods that have a sinusoidal voltage difference applied between them. The length of the rods is chosen such that they...
