Per page:

Electrical Blog Posts

Modeling a Surface Micromachined Accelerometer

December 23, 2014

Surface micromachining is a process used to manufacture MEMS devices, which includes accelerometers. In this blog post, we model the electric field and forces within an accelerometer as well as highlight a new geometry feature available in COMSOL Multiphysics version 5.0.

Fillet Away Your Electromagnetic Field Singularities

December 18, 2014

No matter how much you refine the mesh at that corner in your geometry, the electromagnetic field that you are computing never seems to settle on a converged value. Is this a problem? If so, what can you do about it? Read on to find out.

Modeling Beam Neutralization with a Charge Exchange Cell

December 16, 2014

Charge exchange cells are often used as a way to obtain neutralized beams of energetic particles. In this blog post, we introduce a model of a simple charge exchange cell and analyze its neutralization efficiency.

An Analysis of Caustic Surface Generation at the Vdara® Hotel

December 12, 2014

Among its neighboring buildings on the Las Vegas strip, the Vdara® hotel can be identified by its unique crescent-shaped design. While visually appealing, this architectural element became an area of concern as it contributed to the development of a caustic surface on the hotel’s pool deck. As a result, guests at particular locations experienced severe sunburns at certain days and times of the year. Here, we model the generation of a caustic surface in the case of the Vdara® hotel.

Automatic Meshing for Electromagnetic Simulations

December 9, 2014

Here’s a question for all you electromagnetics-focused simulation engineers out there: Have you ever looked in envy at your structural, fluid, and chemical counterparts as they mesh their models with the click of a button, while you struggle to mesh your infinite elements or perfectly matched layers? Well, now you too can enjoy automatic meshing with a click (or two). Let me show you how.

Modeling Ray Propagation in a Newtonian Telescope System

December 5, 2014

When the Newtonian telescope was first developed in 1668, it was recognized as the earliest operating reflecting telescope. With its low cost and simplistic design, this optical system became a favorable alternative to refracting telescopes, and the technology continues to be widely used today. Using the Ray Optics Module, we can analyze ray propagation within this type of telescope system.

Investigating LED Efficiency via Multiphysics Simulation

December 3, 2014

Bright light-emitting diodes (LEDs) are revolutionizing the lighting industry and blue LEDs in particular are ushering in a new age of widespread efficient LED lighting. The importance of blue LEDs was marked by this year’s Nobel Prize in physics, which went to the inventors. But, because bright LEDs are driven by larger currents, they suffer from reduced efficiency — a phenomenon known as LED droop. Using multiphysics simulations, we can investigate and understand the mechanisms behind LED efficiency.

New Accumulators Boost Particle and Ray Tracing Functionality

November 26, 2014

With the release of COMSOL Multiphysics version 5.0, the Particle Tracing Module now includes a series of features called Accumulators, which can be used to couple the results of a particle tracing simulation to other physics interfaces. The accumulated variables may represent any physical quantity and can be defined either within domains or on boundaries, making them extremely flexible. Here, I will explain the different types of accumulators and their applications in particle tracing and ray optics models.