Per page:
Search

Mechanical Blog Posts

Introduction to Modeling Acoustic-Structure Interactions in COMSOL®

June 12, 2019

To model an ASI problem, you need to account for the behavior of elastic waves in solids, pressure waves in fluids, and their interaction. The COMSOL® software includes interfaces for doing so.

Frequency Response of Mechanical Systems

June 5, 2019

Read this blog post for a detailed look at damped mechanical systems, a guide to setting up frequency-response analyses in COMSOL®, and a discussion of how to interpret your results.

How to Use Lumped Elements to Model a Mechanical System

May 29, 2019

Modeling a large, complex system? You may want to simplify configurations in the model setup to better understand it, but how? Enter the Lumped Mechanical System interface in COMSOL Multiphysics.

Analyzing Slope Stability Through the Shear Strength Reduction Method

May 28, 2019

Dams that are poorly designed or constructed are likely to fail. However, geotechnical engineers can account for the stability and reliability of a dam long before the structure is even built.

Analyzing Topology Optimization of a Photoacoustic Spectroscopy Cell

May 24, 2019

Signals generated via photoacoustic spectroscopy are often weak and difficult to detect. Acoustic cells can be used to amplify the signal, but they need to be designed with sensitivity in mind.

4 Methods to Account for Radiation in Participating Media

May 22, 2019

The discrete ordinates method, P1 approximation, Rosseland approximation, or the Beer–Lambert law: Which should you use to analyze heat transfer in participating media?

Evaluating the Impact of Bearing Misalignment on Rotor Vibration

May 14, 2019

Bearings are found in devices ranging from MEMS and turbines to electric motors and even ships. How we account for a bearing’s misalignment (and the resulting rotor vibration) depends on its use.

Introduction to Numerical Integration and Gauss Points

May 1, 2019

In this comprehensive blog post, we go over the theory behind numerical integration, Gaussian quadrature, Gauss points, weak contributions, and much more.


EXPLORE COMSOL BLOG