COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - 5.2

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Announcement Announcement Now available: COMSOL 5.2a Update 3 696 0 2 months ago
Author Subject Views Replies Last Post
Bouhlal  Abdelkader Bouhlal Abdelkader coil impedance
5.2 , AC/DC Module
34 1 2 hours ago
Michael Potter Michael Potter not converged in spite of the low error value
5.2a , 5.2 , Solving
51 1 11 hours ago
Nithya Ramesh Nithya Ramesh Movement of a particle due to dielectrophoresis
5.2 , Dielectrophoresis , Microfluidics , particle , Particle Tracing Module
30 1 22 hours ago
Erick Alaimo Erick Alaimo Cable model with point mass
solid mechanics , Truss , 5.2 , Solving , Structural Mechanics
30 0 1 day ago
阿署 王 阿署 王 Simulation of semiconductor electric potential
4.0 , 5.2 , Materials and functions
1,990 1 3 days ago
Roberto Morelli Roberto Morelli Particles release inlet setting
5.2 , Physics , AC/DC Module , inlet , Time-dependent , field emission
33 0 4 days ago
Imdone Imdone Evaluate on a set of points
5.2 , Geometry , Results and visualization
53 2 4 days ago
Roberto Morelli Roberto Morelli Number of particles in the space charge limited emission
5.2 , AC/DC Module
17 0 4 days ago
茂林 王 茂林 王 So comsol can not be used to carry on the simulation of RTM (Resin transfer Molding) process?
5.2a , 5.2 , CFD
24 0 5 days ago
卡卡 李 卡卡 李 Error message
5.2 , Installation
44 0 6 days ago
Imdone Imdone Export single domain scalar field to a text file
5.2 , Results and visualization
71 2 6 days ago
Mohammadreza Samieegohar Mohammadreza Samieegohar Particle induced charge on the surface
Particle Tracing Module , 5.2
24 0 6 days ago
Hai Lin Hai Lin using comsol simulate graphene plasmonic waveguide
5.2 , RF Module
698 2 6 days ago
Arsha Shiri Arsha Shiri Averaging multiple cut line 3D
5.2 , Heat Transfer
37 0 6 days ago
Ananda Das Ananda Das Normalizing eigenmode
5.2 , Results and visualization , AC/DC Module , RF Module
68 0 1 week ago
Mouna Brahmi Mouna Brahmi Laplacian of The displacement field
Laplace Operator , the divergence of a gradient , 5.1 , 5.2 , Structural Mechanics
229 2 1 week ago
Nick Verhoeven Nick Verhoeven solar radiation in a 2d axisymmetric model
5.2 , Heat Transfer
39 0 1 week ago
umshan umshan Creating Geometry with Loop in COMSOL with MATLAB
Geometry , LiveLink products , 5.2
87 4 1 week ago
Michael Stein Michael Stein Simulation Nozzle and Spray
Microfluidics , CFD , 5.2
6,415 6 1 week ago
Mohammadreza Jafari Mohammadreza Jafari Poroelasticity equation definition
5.2 , Porous Media , poroelasticity , Earth Science Module , CFD , Physics , Definitions and operators
69 0 1 week ago
Josh Lipton-Duffin Josh Lipton-Duffin Parametric sweep of geometry with particle tracing study
5.2 , Physics , Solving , Particle Tracing Module , parameter sweep , electrostatics
43 0 1 week ago
Irene Elliot Irene Elliot Acoustic transmission
5.2 , Acoustics Module , sound transmission , solid-acoustic interaction
157 1 2 weeks ago
Itamar Dabush Itamar Dabush accoustic lens
Acoustics Module , 5.2
64 2 2 weeks ago
Akanksha Nawale Akanksha Nawale how to access pressure value at boundary of membrane ?:PEM fuel cell modelling
PEM Fuel Cell modelling , 5.2 , Fluid Flow , Fuel Cells , Chemical Reaction Engineering , CFD , Porous Media
98 0 2 weeks ago
Flanell Flanell Lagrange multiplier in axial symmetry
5.2 , Heat Transfer , Deformed Geometry , lagrange multiplier
74 0 2 weeks ago

Rules and guidelines