COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - 5.2a

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Shreyansh Arora Shreyansh Arora Elasticity matrix of magnesium
5.2a , 5.2 , 4.4 , 4.2a
22 0 12 hours ago
Vivek Sangwan Vivek Sangwan Remove objects from import geometry
5.2a , Geometry
134 2 16 hours ago
Sarra Zid Sarra Zid Physics
5.2a , Geometry , Physics
18 0 1 day ago
Min Kyunghwan Min Kyunghwan set a maximum value as variables
E-field , Maximum value , 5.2a , Definitions and operators
29 0 1 day ago
Daniel Barna Daniel Barna How to 'continue' a parametric sweep in case of a problem?
parametric sweep , 5.2a
285 8 2 days ago
Onyeabo Ekwenmuo Onyeabo Ekwenmuo Error message
5.2a
41 2 2 days ago
Alejandro Piquero Alejandro Piquero Induction and Joule Heating coupling within a Conjugate Heat Transfer problem concerning a power transformer
5.2a , AC/DC Module , Fluid Flow , Heat Transfer
35 0 3 days ago
Florian Tomiak Florian Tomiak modelling cristallization rate (alpha)
5.2a , Materials and functions , Physics , Heat Transfer
48 1 3 days ago
Tarun Singh Tarun Singh how to add rock mass joint set in comsol
Slope Stability , 5.2a , 5.2 , 4.3 , Physics , Structural Mechanics
39 0 4 days ago
Thomas Wolowiec Thomas Wolowiec Setting up an internal port in RF Module
5.2a , RF Module
38 0 5 days ago
Evan Kallenberg Evan Kallenberg Laminar flow model with two inlets, one outlet, and a vacuum pump
5.2a , Fluid Flow , CFD , Microfluidics , Materials and functions , Physics
143 7 5 days ago
Mehdi Jokar Mehdi Jokar Incident Pressure field vs Pressure Boundary Condition
Acoustics Module , 5.2a , 5.2 , 5.1
33 0 5 days ago
Aj Aj Calculation of relative contribution of a layer of material to the overall model
5.2a , Results and visualization , AC/DC Module
28 0 5 days ago
Warapon Wichitpan Warapon Wichitpan Can i import this waveform to my current input ?
5.2a , 4.3b , Heat Transfer
64 1 5 days ago
Ashish Ashish Integral over a arbitrary path
5.2a , AC/DC Module , Definitions and operators , Geometry
772 3 5 days ago
Leyla Roohisefat Leyla Roohisefat how to define material pixel by pixel?
how to define material pixel by pixel? , 5.2a , Materials and functions , AC/DC Module
118 7 6 days ago
Tom Myers Tom Myers Conditional Statements within an Expression
5.2a
18,718 20 6 days ago
Zinar Bilek Zinar Bilek A beginner's question regarding flow simulation of perforated pipes
5.2a , Fluid Flow , CFD
45 0 6 days ago
Mekap Subhasish Pattanaik Mekap Subhasish Pattanaik Optimized meshing
5.1 , 5.2 , 5.2a , Mesh , Physics
63 0 6 days ago
Hamed Rahimi Hamed Rahimi Surface integral in 2D axisymmetric model
5.2a , Acoustics Module , Results and visualization
77 2 7 days ago
Shawn Gao Shawn Gao Cannot Compute Conjugate Heat Transfer
5.2a , Heat Transfer
43 0 7 days ago
Young Song Young Song Thermoacoustics using COMSOL Multiphysics
4.2 , Acoustics Module , Heat Transfer , 4.2a , 5.2a
6,249 3 1 week ago
Vasily Zarubin Vasily Zarubin Time-dependent thermoacoustics
4.4 , Heat Transfer , Acoustics Module , 5.2a
460 1 1 week ago
Bharath Kumar Narukullapati Bharath Kumar Narukullapati To find magnetic field intensity on a surface at particular points in 3D model
5.2a , AC/DC Module
41 0 1 week ago
Andy Trickey-Glassman Andy Trickey-Glassman Transmission Loss Simulation
Acoustics Module , 5.2a , Structural Mechanics
55 1 1 week ago

Rules and guidelines