COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - Fluid Flow

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Announcement Announcement Now available: COMSOL 5.2a Update 3 605 0 2 months ago
Author Subject Views Replies Last Post
Riya Gangopadhyay Riya Gangopadhyay Failed to find a solution. Maximum number of Newton iterations reached. Returned solution is not converged.''
Physics , Solving , CFD , Fluid Flow , Installation
82 2 48 minutes ago
qiang  Li qiang Li solving is not a convergence
5.0 , Solving , Fluid Flow , Heat Transfer
41 0 1 day ago
Seyed Mohammad Javid Mahmoudzadeh Akherat Seyed Mohammad Javid Mahmoudzadeh Akherat FSI with solid contact in the fluid domain
5.2a , Mesh , Fluid Flow , FSI , MEMS , Structural Mechanics , Microfluidics , Physics
55 0 1 day ago
Brian Schwartz Brian Schwartz Laminar Flow Entrance Region/Issues
5.2a , Fluid Flow
595 4 3 days ago
Sumedh Mool Sumedh Mool Changing the default equation in level set model
5.2a , Definitions and operators , Physics , Mesh , Solving , Fluid Flow
45 1 4 days ago
Samir Hilfi Samir Hilfi Gas velocity in a tube under isothermal heating
Fluid Flow , Heat Transfer , 5.2a
61 0 6 days ago
Akanksha Nawale Akanksha Nawale how to access pressure value at boundary of membrane ?:PEM fuel cell modelling
PEM Fuel Cell modelling , 5.2 , Fluid Flow , Fuel Cells , Chemical Reaction Engineering , CFD , Porous Media
70 0 6 days ago
Haydn Wadsworth Haydn Wadsworth Elasticity Matrix for Silicon
MEMS , Materials and functions , Structural Mechanics , piezoresistivity , matrix , 5.2a , Fluid Flow , Microfluidics
10,330 15 6 days ago
Hwajung Yoo Hwajung Yoo assign pressure to line geometry in 3D
5.2a , 4.4 , Porous Media , Fluid Flow , Earth Science Module
68 0 7 days ago
Jan Kolbe Jan Kolbe Convection in a hollow cylinder between solid domains
Heat Transfer Module , Convection , hollow cylinder , Geometry , 5.1 , Materials and functions , Physics , Solving , Fluid Flow , Heat Transfer
81 0 7 days ago
Joy Au Joy Au Imported Geometry Shows up as a Hollow Block??
5.2a , Geometry , Fluid Flow , CFD
68 0 1 week ago
Abhishek Rai Abhishek Rai mems based capacitive type humidity sensor
capacitve , mesm , senosr , 4.3b , 4.3a , Humidity , 4.3 , Porous Media , Chemical Reaction Engineering , Microfluidics , Fluid Flow , MEMS , Diffusion , 5.2a , Structural Mechanics
2,400 1 1 week ago
Muhammad Salman Khan Muhammad Salman Khan Modelling Room Air Environment in COMSOL
5.2 , Physics , Materials and functions , Solving , Fluid Flow , CFD , Definitions and operators , Microfluidics , MEMS
100 0 1 week ago
刚 王 刚 王 turbulence model
Heat Transfer , Fluid Flow , 5.1
113 2 2 weeks ago
Christoph Hieronymus Christoph Hieronymus Advection and rotation of tensor property in fluid flow
Fluid Flow
113 4 2 weeks ago
Riya Gangopadhyay Riya Gangopadhyay Importing 3D geometry into COMSOL
Fluid Flow , Geometry
159 5 2 weeks ago
Kristina B Kristina B Coupling Lam. Flow and Transport of diluted species in both directions
5.2 , Fluid Flow , Transportof diluted species , Coupling
36 0 2 weeks ago
Alexandre Fête Alexandre Fête SPF.rho and mat1.def.rho(P,T)
Fluid Flow , 5.2a
106 5 3 weeks ago
Thunder Liu Thunder Liu Problem in 1D EHD simulation
Fluid Flow , 5.2 , Weak Form Boundary PDE
368 6 3 weeks ago
Ishtiak Mokut Ishtiak Mokut Combining FSI and Piezoelectric device
5.2 , Physics , Fluid Flow , FSI , MEMS , Microfluidics
74 0 3 weeks ago
潮 唐 潮 唐 Ask help for Infinite Conductivity Fracture
5.2 , Fluid Flow , Porous Media
77 0 3 weeks ago
Ben M Ben M weird air flow
5.2 , Fluid Flow , Geometry , Solving , Physics
103 0 4 weeks ago
Shoaib Anwar Shoaib Anwar how to calculate lift and drag coefficient in k-epsilon model
5.2 , CFD , Fluid Flow , Results and visualization
122 1 4 weeks ago
How-Ming Lee How-Ming Lee Temperature not continuous at solid/fluid interface
CFD , Fluid Flow , Heat Transfer
313 2 4 weeks ago
TKint TKint Modeling of diffusion
5.2 , 5.0 , CFD , FSI , Fluid Flow
666 5 4 weeks ago

Rules and guidelines