COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - general

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
DoWon Heo DoWon Heo 2D approximation plane stress condition
5.0 , 2D approximation
7 0 36 minutes ago
Daniel Barna Daniel Barna How to 'continue' a parametric sweep in case of a problem?
parametric sweep , 5.2a
254 6 1 hour ago
Sultan Mahmud Sultan Mahmud Heat Transfer 4.4 4 0 1 hour ago
Sultan Mahmud Sultan Mahmud Heat Transfer
4.4
3 0 1 hour ago
Guanlong Guo Guanlong Guo Define an anisotropic permeability for a porous media
anisotropic permeability
16 1 2 hours ago
Onyeabo Ekwenmuo Onyeabo Ekwenmuo Error message
5.2a
25 1 2 hours ago
Guanlong Guo Guanlong Guo How to cite the principal stress and the principal direction in model?
principle stress
20 1 2 hours ago
Mohamad Ghulam Mohamad Ghulam Using Collapse faces & Collapse edges for 3D Model
3D model , Aeroacoustics
7 0 4 hours ago
Christian Wild Christian Wild Cumulative sum along an axis 6 0 10 hours ago
Craig Garvin Craig Garvin Decyphering 'Axis Vector' error 985 5 11 hours ago
Alejandro Piquero Alejandro Piquero Induction and Joule Heating coupling within a Conjugate Heat Transfer problem concerning a power transformer
5.2a , AC/DC Module , Fluid Flow , Heat Transfer
21 0 12 hours ago
Florian Tomiak Florian Tomiak modelling cristallization rate (alpha)
5.2a , Materials and functions , Physics , Heat Transfer
34 1 13 hours ago
Pierre CARNIATO Pierre CARNIATO Domain Probe Use
Definitions and operators , 4.0a , 4.0
4,593 2 16 hours ago
Brad Perfect Brad Perfect 3D fluid flow in a pipe
3d , Fluid Flow , Heat Transfer , 5.2
5,230 6 19 hours ago
Federico Giai Pron Federico Giai Pron Two Phase Transport PEMFC
Solving , CFD , Fluid Flow , Chemical Reaction Engineering , Fuel Cells , Batteries , Porous Media
27 0 1 day ago
tarun singh tarun singh how to add rock mass joint set in comsol
Slope Stability , 5.2a , 5.2 , 4.3 , Physics , Structural Mechanics
26 0 1 day ago
Houari Cobas Houari Cobas About general projection orlinear projection
Results and visualization
1,066 1 2 days ago
Xin Wu Xin Wu Moving boundary problem in the pitting corrosion of multigrain
Chemical Reaction Engineering , 5.2
39 2 2 days ago
JF Wa JF Wa particle deformation througn a contrained channel
4.2a , Structural Mechanics , Microfluidics , Fluid Flow , MEMS
1,486 5 2 days ago
Guanlong Guo Guanlong Guo How to simulate air compression by injecting water at constant rate in a closed container?
air compression , inject water
11 0 2 days ago
Tommaso Santagata Tommaso Santagata Unsaturated flow with dry initial condition
Porous Media , Earth Science Module , Solving
24 0 2 days ago
Thanasis Hous Thanasis Hous PN - Junction 1D (Application Gallery) - Problem with variables
5.1 , 5.2a , 5.2
18 0 2 days ago
Saeed Younis Saeed Younis defining a no-flux 2D surface on top of a 3D box
5.2 , MEMS , Application Builder , Geometry
58 8 2 days ago
Sajiree Vaidya Sajiree Vaidya Damping of the piezoelectric material
Physics , Materials and functions , FSI , Solving , MEMS , Structural Mechanics , 5.2
47 0 3 days ago
Thomas Wolowiec Thomas Wolowiec Setting up an internal port in RF Module
5.2a , RF Module
33 0 3 days ago

Rules and guidelines