COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - Geometry

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Saeed Younis Saeed Younis defining a no-flux 2D surface on top of a 3D box
5.2 , MEMS , Application Builder , Geometry
55 8 2 days ago
Marius Lorvik Marius Lorvik Is there an easy way to create a high number of geometric components with a random roughness component?
photonic crystal , LiveLink for MATLAB , RF Module , Geometry
2,744 7 2 days ago
Ashish Ashish Integral over a arbitrary path
5.2a , AC/DC Module , Definitions and operators , Geometry
761 3 2 days ago
Nicholas Goldring Nicholas Goldring Plotting Displacement Slope Error Along a Cut Edge
5.2 , Definitions and operators , Results and visualization , Geometry
28 0 3 days ago
Nick Verhoeven Nick Verhoeven non-uniform initial temperature distribution
5.2 , Heat Transfer , Geometry , Materials and functions
44 1 4 days ago
Dilan Tharindu  Sandaruwan Dilan Tharindu Sandaruwan Take large time to create a Geometry
4.4 , Geometry
54 0 1 week ago
Chris Nadovich Chris Nadovich Simple Geometry Question
4.2a , Geometry , 5.0 , 5.2a
7,394 14 1 week ago
Mohamed Adelkhalik Mohamed Adelkhalik Contact Pairs in Electromechanical Model
MEMS , MEMS Module , 5.2 , Physics , Geometry
87 0 1 week ago
gemma gemma Extruding a hexagon polygon
5.2a , Acoustics Module , Structural Mechanics , Geometry
2,560 6 2 weeks ago
Paul Burton Paul Burton Optimization Stops Even When "Stop if error" Checkbox is Cleared.
5.2a , Geometry , Optimization Module
38 0 2 weeks ago
Sebastien Murphy Sebastien Murphy move an entire array without having to select each sub-component
Geometry
1,322 5 2 weeks ago
D-G-C D-G-C How do I use Layers in Geometry definition?
Geometry
94 2 2 weeks ago
Andrey Zhdanov Andrey Zhdanov Assigning materials to domains from MATLAB
Materials and functions , LiveLink products , Geometry , 5.2a
3,347 3 2 weeks ago
Jayse Langdon Jayse Langdon Add a part to the part library
5.2a , Geometry
46 1 2 weeks ago
Ali Fate Ali Fate 2D corona Discharge
5.2 , Geometry , Physics , Mesh , Solving , AC/DC Module , Plasma Module
133 1 3 weeks ago
Peter Ibrahim Peter Ibrahim how to apply base excitation to a mechanical cantilever
Geometry , Materials and functions , Physics , Solving
60 0 3 weeks ago
Salman Ullah Salman Ullah Help about the geometory of 3d organic solar cell in comsol
Geometry , 5.2
121 1 3 weeks ago
Shikhar Nilabh Shikhar Nilabh How to deal with discontinuous heterogeneous data in 2D geometry
5.2 , 5.1 , Earth Science Module , Porous Media , CFD , Fluid Flow , Geometry , Definitions and operators , Materials and functions , Physics , Solving , Mesh
217 0 3 weeks ago
Jeet Banerjee Jeet Banerjee Matching of geometry units and physics units
4.4 , Geometry , Physics , Results and visualization
108 1 3 weeks ago
Waseem Aldeek Waseem Aldeek Exporting COMSOL data into MATLAB
LiveLink products , 5.2 , Geometry , Structural Mechanics
437 3 3 weeks ago
Roberto Morelli Roberto Morelli Nanotubes of random height
Geometry , 5.2
251 4 3 weeks ago
Gert Persson Gert Persson Super simple geometry- self intersection when meshing 5.2.a
Geometry , Mesh , 5.2a , AC/DC Module
111 2 3 weeks ago
Juan Muñoz Juan Muñoz Symmetry in Electrostatics Module
5.2a , Geometry , Definitions and operators
61 1 3 weeks ago
Aaron Cunningham Aaron Cunningham Torque on Anti-Roll Bar
5.2a , Structural Mechanics , Geometry , Physics , Results and visualization , Materials and functions
129 1 3 weeks ago
Nicholas Goldring Nicholas Goldring Inducing torque at the ends of a deformed, imported 3D beam geometry
5.2 , Mesh , Geometry , Structural Mechanics , Heat Transfer
191 11 4 weeks ago

Rules and guidelines