COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - Porous Media

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Daniel Onwude Daniel Onwude Couple heat and mass transfer of porous media
5.2 , Heat Transfer , Porous Media
50 0 6 days ago
Dennis Joshy Dennis Joshy Transmission Loss in a Porous Medium actuated by a PZT
Acoustics Module , Structural Mechanics , 5.0 , Porous Media
42 0 2 weeks ago
Vittorio Villani Vittorio Villani [Porous Media] Brinkman and Heat Transfer in porous media: how can I create a coupling?
Heat Transfer , Porous Media , CFD
585 3 3 weeks ago
Shreya Sahasrabudhe Shreya Sahasrabudhe Imposing pressure and velocity continue boundary conditions
Porous Media , Fluid Flow , CFD , 5.2a
124 0 3 weeks ago
Nurlan Shaimerdenov Nurlan Shaimerdenov Failed to find consistent initial values
5.2 , Geometry , Mesh , Solving , Physics , Fluid Flow , Porous Media , Chemical Reaction Engineering
551 1 3 weeks ago
Tommaso Santagata Tommaso Santagata Unsaturated flow with dry initial condition
Porous Media , Earth Science Module , Solving
125 2 4 weeks ago
Muhammad Shahid Manzoor Muhammad Shahid Manzoor Flux over time Graph /Plot
4.4 , Fluid Flow , Microfluidics , Porous Media , Physics , Results and visualization , Earth Science Module , Definitions and operators
258 2 4 weeks ago
Federico Giai Pron Federico Giai Pron Two Phase Transport PEMFC
Solving , CFD , Fluid Flow , Chemical Reaction Engineering , Fuel Cells , Batteries , Porous Media
148 0 4 weeks ago
Guanlong Guo Guanlong Guo Boundary condition is a PDE, rather than a constant!
boundary condition , Porous Media , partial differential equation , Fluid Flow
75 0 1 month ago
Mahvash Afzal Mahvash Afzal Grid independence
5.2 , Heat Transfer , Porous Media , Fluid Flow , Mesh
194 0 1 month ago
Naser Nasrollahzadeh Naser Nasrollahzadeh Time dependent Poroviscoelastic model
Porous Media , Structural Mechanics
110 0 1 month ago
Vikrant Vishal Vikrant Vishal Subsurface flow in heterogeneous reservoir......
4.3b , Earth Science Module , Definitions and operators , Porous Media , 5.2
2,343 14 1 month ago
Shikhar Nilabh Shikhar Nilabh How to deal with discontinuous heterogeneous data in 2D geometry
5.2 , 5.1 , Earth Science Module , Porous Media , CFD , Fluid Flow , Geometry , Definitions and operators , Materials and functions , Physics , Solving , Mesh
352 0 2 months ago
Mranal Jain Mranal Jain One way multiphysics coupling within a transient simulation
Solving , 5.0 , Heat Transfer , Porous Media
3,659 17 2 months ago
Murat Murat Modelling cavitation
5.1 , 5.0 , 4.4 , Fluid Flow , CFD , Porous Media , Microfluidics , Acoustics Module
718 1 2 months ago
Liam Hartley Liam Hartley Diffusion Coefficient calculation in material properties
5.2a , Porous Media , Definitions and operators , Materials and functions , Chemical Reaction Engineering
212 0 2 months ago
Mohammadreza Jafari Mohammadreza Jafari Poroelasticity equation definition
5.2 , Porous Media , poroelasticity , Earth Science Module , CFD , Physics , Definitions and operators
222 0 2 months ago
Akanksha Nawale Akanksha Nawale how to access pressure value at boundary of membrane ?:PEM fuel cell modelling
PEM Fuel Cell modelling , 5.2 , Fluid Flow , Fuel Cells , Chemical Reaction Engineering , CFD , Porous Media
159 0 2 months ago
Hwajung Yoo Hwajung Yoo assign pressure to line geometry in 3D
5.2a , 4.4 , Porous Media , Fluid Flow , Earth Science Module
169 0 2 months ago
Abhishek Rai Abhishek Rai mems based capacitive type humidity sensor
capacitve , mesm , senosr , 4.3b , 4.3a , Humidity , 4.3 , Porous Media , Chemical Reaction Engineering , Microfluidics , Fluid Flow , MEMS , Diffusion , 5.2a , Structural Mechanics
2,622 1 3 months ago
Elizabeth Walker Elizabeth Walker Question about Permeability Units
4.2a , Microfluidics , Porous Media , Permeability , literature values
545 2 3 months ago
潮 唐 潮 唐 Ask help for Infinite Conductivity Fracture
5.2 , Fluid Flow , Porous Media
103 0 3 months ago
José Leôncio Fonseca  Souza José Leôncio Fonseca Souza ERROR: FAILED TO EVALUATE VARIABLE JACOBIAN, Variable: K_corn
4.4 , Porous Media
86 0 3 months ago
Jia Liu Jia Liu The integration for flux in internal boundary in comsol
4.3b , Results and visualization , Porous Media
200 0 4 months ago
Giovanni Giansiracusa Giovanni Giansiracusa Geomechanics module: what model is better for lightweight expanded clay aggregate material?
5.0 , Materials and functions , Structural Mechanics , Porous Media , Geomechanics Module , Rocks , Hoek-Brown model , Cam-clay model , Lightweight expanded clay aggregate
251 0 4 months ago

Rules and guidelines