COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - Solving, solving\

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Damien de Courten Damien de Courten parametric sweep study depending on a parametric sweep study
4.4 , Fluid Flow , Geometry , Chemical Reaction Engineering , Microfluidics , Solving
573 1 2 hours ago
Robert Ehlers Robert Ehlers Modeling the air temperature inside an enclosure
5.2a , Physics , Solving , Heat Transfer
19 0 5 hours ago
Ehsan Farno Ehsan Farno Take the surface average on the outlet and inlet boundaries
5.2a , LiveLink products , Solving
44 2 10 hours ago
Evgeny Petrov Evgeny Petrov Coefficient Form PDE: Solving boundary problem with Bessel differential equation
5.2a , Solving
44 0 2 days ago
Ehsan Farno Ehsan Farno Distributed ode with convection and diffusion equation
5.2a , Definitions and operators , Solving
31 0 2 days ago
子懋 王 子懋 王 level set without body forece
5.2a , Fluid Flow , CFD , Microfluidics , Solving , Physics , Materials and functions , Definitions and operators , Geometry
47 0 2 days ago
跃强 胡 跃强 胡 How to define a Dependent variable as zero in specific area?
5.2 , Solving , Definitions and operators , Materials and functions
29 0 2 days ago
Manuel Ayala Manuel Ayala Time Dependent of intake manifold
Fluid Flow , CFD , Solving , 5.2 , 5.2a , 5.1
44 0 2 days ago
Anas Asif Anas Asif Error while solving (Disk Brake heat generation)
Solving , 5.0
26 0 4 days ago
Antoni Artinov Antoni Artinov Segregated Solver
5.0 , Solving , Mesh , Results and visualization , CFD
65 0 5 days ago
Sumit Mohanty Sumit Mohanty Longer simulation study
5.1 , Solving , Results and visualization , Application Builder
91 2 5 days ago
Jorge Diaz Burgos Jorge Diaz Burgos How to resolve warnings about relative error in comsol?
contact pair , relative error , 5.0 , Solving , Structural Mechanics
52 0 6 days ago
Dimitrios Nikas Dimitrios Nikas Sheet metal bending - spring back effect
5.2 , Materials and functions , Solving , Structural Mechanics
110 2 6 days ago
Hernan Vignolo Hernan Vignolo Acoustics - Large models convergence
Acoustics Module , Solving , Mesh , Physics , Geometry , 5.1
610 4 6 days ago
Shantanu Datta Shantanu Datta Analysis of mixed convection flows within a square cavity
Heat Transfer , Solving , 4.4
58 0 7 days ago
Stefan Eidelloth Stefan Eidelloth Undefined value found
Mesh , Solving , Chemical Reaction Engineering , 4.3b
37,084 15 1 week ago
Saleha Quadssia Saleha Quadssia Damped Eigen frequency Analysis
5.0 , MEMS , Structural Mechanics , Solving
1,003 1 1 week ago
Joo-Youp Lee Joo-Youp Lee Parameter estimation
Solving , 5.2
2,160 5 1 week ago
Chang Liu Chang Liu Out of memory during out-of-core LU factorization
5.2 , Solving
59 1 1 week ago
Sijie Liao Sijie Liao The compression simulation, and the material "exploded" during simulation, why?
compressing , material setting , 5.2 , Solving , Materials and functions , Results and visualization
100 0 2 weeks ago
Rokas Petriukas Rokas Petriukas How to choose right conditions
Structural Mechanics , Definitions and operators , Solving , dynamics
110 0 2 weeks ago
Ben Leser Ben Leser Eddy current simulation not converging when velocity increases
5.2a , Physics , Mesh , Solving , AC/DC Module , Eddy currents
114 2 2 weeks ago
Richard Storm Richard Storm What is "Maximum Element growth rate" and "curvature factor" in the Mesh section?
5.2 , Structural Mechanics , Mesh , Solving , Physics
699 5 2 weeks ago
Aditya Sridhar Aditya Sridhar COMSOL Design of Membrane Deformation using FSI
5.2a , Fluid Flow , FSI , Geometry , Microfluidics , Results and visualization , Solving
92 0 2 weeks ago
Sarra Zid Sarra Zid modifyin mesh didn't modify my results
5.2a , Mesh , Solving , Results and visualization
207 2 2 weeks ago

Rules and guidelines