COMSOL provides the Discussion Forum for the benefit of our user community to share ideas with each other, and for open discussion on topics that are of interest to the COMSOL Multiphysics user base.

While COMSOL employees may occasionally participate in Discussion Forum discussions, their contributions to a specific topic or technical question may not be as comprehensive as a response to a support request handled through COMSOL's support process.

All of COMSOL's on-subscription customers are welcome to submit their questions via: www.comsol.com/support to be addressed individually by the COMSOL Technical Support Team.

Active Discussions - Structural Mechanics

Active discussions  |  Recent messages  |  Start a new discussion

Author Subject Views Replies Last Post
Andy Trickey-Glassman Andy Trickey-Glassman Transmission Loss Simulation
Acoustics Module , 5.2a , Structural Mechanics
42 1 22 hours ago
Jason Maxwell Jason Maxwell Inconsistency in 2D and 2D axisymmetric
5.2a , Structural Mechanics , Physics
36 0 2 days ago
Siavash Shoja Siavash Shoja Connection between 2 shells
shell-shell contact , 5.1 , Structural Mechanics
161 1 4 days ago
gemma gemma Extruding a hexagon polygon
5.2a , Acoustics Module , Structural Mechanics , Geometry
2,537 6 7 days ago
Naser Nasrollahzadeh Naser Nasrollahzadeh Time dependent Poroviscoelastic model
Porous Media , Structural Mechanics
47 0 7 days ago
Nicholas Goldring Nicholas Goldring Exporting a regular data grid from a surface
Structural Mechanics , Heat Transfer , Results and visualization , Definitions and operators , 5.2
57 0 1 week ago
Daniel Berk Daniel Berk Exporting Comsol data to Matlab?
4.2 , Structural Mechanics , LiveLink products , Export , MATLAB , 5.2
43,134 14 1 week ago
Alexander Werth Alexander Werth Displacement of a point or node within global coordinate frame
FSI , Mesh , Structural Mechanics
84 2 1 week ago
Alexander Werth Alexander Werth Negative pressure values 2D laminar tube flow
5.0 , Fluid Flow , Structural Mechanics
55 0 1 week ago
Olivier Mesnil Olivier Mesnil Solid Mechanics - 2D - Stationary - Contact - Does not converge !
5.2a , contact , Structural Mechanics
1,773 8 1 week ago
Linus Linus "Include Geometric Nonlinearity" for Membrane
5.2a , Solving , Structural Mechanics , Acoustics Module
321 5 1 week ago
DK Boneco DK Boneco Contact is not working
5.2a , Structural Mechanics , Physics , Solving
95 0 2 weeks ago
Mohamed Ashour Mohamed Ashour Non-linear Polymer Plasticity
Structural Mechanics
46 0 2 weeks ago
Martijn Schouten Martijn Schouten ID of physics in Livelink for matlab
5.2 , LiveLink products , Structural Mechanics
89 2 2 weeks ago
Ranulfo Martins Neto Ranulfo Martins Neto Bonded joint
Structural Mechanics
45 1 2 weeks ago
Rahul Goyal Rahul Goyal Duplicate parameter/variable name.
5.2 , Structural Mechanics , electromechanics
75 2 2 weeks ago
Peter Ibrahim Peter Ibrahim how to add forced vibration and base excitation to a mechanical cantilever ?
5.0 , Physics , Solving , Application Builder , Structural Mechanics
96 0 2 weeks ago
Waseem Aldeek Waseem Aldeek Exporting COMSOL data into MATLAB
LiveLink products , 5.2 , Geometry , Structural Mechanics
430 3 2 weeks ago
David Lacombe David Lacombe Void Equations for my Truss Problem
5.1 , Structural Mechanics , Void Equation
70 1 2 weeks ago
Louis-Daniel Théroux Louis-Daniel Théroux I want the optimization solver to evaluate the objective at all time steps
4.3a , Structural Mechanics , Heat Transfer , Solving
1,045 2 2 weeks ago
Vasishta Kanthi Vasishta Kanthi Unable to add point load in a shell - says" not applicable"
point load , shell , Structural Mechanics
45 0 3 weeks ago
Shimaa Mohamed Shimaa Mohamed Model piezoelectric cantilever beam
MEMS , Structural Mechanics
205 1 3 weeks ago
Aaron Cunningham Aaron Cunningham Torque on Anti-Roll Bar
5.2a , Structural Mechanics , Geometry , Physics , Results and visualization , Materials and functions
121 1 3 weeks ago
uday uday About Fixed constraint
4.2a , 4.2 , 4.1 , Structural Mechanics , Materials and functions , 5.0
2,003 3 3 weeks ago
Rong Xu Rong Xu Couldn't find the buttion to change the frame of variable (shape function)
5.2a , Definitions and operators , Structural Mechanics
67 0 3 weeks ago

Rules and guidelines