Join us and fellow engineers from your region online for COMSOL Day South & Midwest. Listen to experts in the field of simulation, engage in product demonstrations, and ask questions to COMSOL technical staff. There will be interactive Tech Cafés run in parallel with the main sessions, covering high-frequency electromagnetics and structural mechanics.
View our preliminary schedule below, and note that some sessions are subject to change. Register for free today!
Please join us 10 minutes before the presentation starts to settle in and make sure that your audio and visual capabilities are working.
To start, we will briefly discuss the format of the day and go over the logistics for using GoToMeeting.
See how you can deploy the power of high-fidelity simulation to engineers, designers, operators, and scientists throughout your organization.
Learn the fundamental workflow of COMSOL Multiphysics®. This introductory demonstration will show you all of the key modeling steps, including geometry creation, setting up physics, meshing, solving, and postprocessing.
Learn about the Acoustics Module and how it can be used to model sounds waves, their propagation, and their interaction with solids at both small and large scales. Use cases include nondestructive testing, speakers, microphones, and sonar.
Antennas, waveguides, metamaterials, and filters are just some of the high-frequency and microwave devices that will be discussed in this Tech Café. COMSOL engineers will be available to take your questions and suggest modeling techniques for simulating these and other devices.
Industry and government organizations will showcase how they are using multiphysics simulation to improve products and solve problems.
- Henry Diaz-Alvarez, U.S. Army Corps of Engineers
- Prashant Jain, ORNL
- David Gross, MED Institute
- Kyle Koppenhoefer, AltaSim Technologies
Learn about the capabilities of the AC/DC Module for modeling Maxwell's equations in the low-frequency regime. Use cases include resistive and capacitive devices, inductors and coils, as well as motors and magnets.
Structural analysis is often an integral part to many multiphysics applications, such as FSI; acoustics-structure interaction; piezoelectric effects; and, of course, thermal stresses. Join this Tech Café to discuss the different varieties of structural analyses and material models supported by the COMSOL® software and how they pertain to your multiphysics-based applications.
Get an overview of using the CFD Module for laminar, turbulent, non-Newtonian, and multiphase flows as well as flow in microfluidic devices. We will discuss conjugate heat transfer with the combination of heat transfer in solids and heat transfer in fluids, including thermal radiation effects. These phenomena could also be coupled with structural mechanics, chemical reactions, and particle tracing.
Get an overview of the shape and topology optimization capabilities available in the COMSOL® software for producing lightweight and more efficient designs. Shape optimization involves the free-form deformation of a CAD part by means of the mesh and geometry deformation tools in COMSOL Multiphysics® and the Optimization Module. Using just a few control variables, you can quickly come up with improved designs. Topology optimization is used to come up with entirely novel designs by allowing the material distribution within the modeling domain to vary.