Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

solver error, COMCOL 4.0

Please login with a confirmed email address before reporting spam

Hello,

I have allways the same error, so I did a very simple example :

I do a 2D, solid Mechanics, Time Dependent modelisation.
A 1x1m Aluminium square.
A simple Free Triangular mesh, Prescribed Displacement for one side, Edge Load for an other side with load = fx
If fx=sin(t), it's ok, I have the solving
If fx is a waveform (sine, with freq=1, phase=0, ampl=1)... a have the error :

The following feature has encountered a problem:
- Feature Time 1 (sol1/t1)
- Error: Failed to evalutble Jacobian.

Why ? Do somebody have a solution ? please

1 Reply Last Post Oct 11, 2010, 12:27 PM EDT
Ivar Kjelberg CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 11, 2010, 12:27 PM EDT
Hi

are you sure you fix all free DoF like that ?

--
Good luck
Ivar
Hi are you sure you fix all free DoF like that ? -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.