Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

electromagnetic simulation model

Posted Nov 7, 2016, 7:55 a.m. EST Low-Frequency Electromagnetics, Geometry, Materials, Modeling Tools & Definitions, Parameters, Variables, & Functions, Results & Visualization, Studies & Solvers Version 5.1 0 Replies

Logeswaran Manivanan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

i need some guidance to create a model to study parameters of electromagnetic and the force it can produce.
my plan is to produce two electromagnetic solenoid one with south pole another with north pole.
so i want to manipulate its parameter such as coil winding, current, and diameter of coil then get results on the electromagnetic force and the air gap between both solenoid


0 Replies Last Post Nov 7, 2016, 7:55 a.m. EST
COMSOL Moderator

Hello Logeswaran Manivanan

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content