Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat Transfer 4.4

Posted Feb 27, 2017, 2:54 a.m. EST 0 Replies

Sultan Mahmud
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to simulate microstructure modified surface where fluid will flow as well as heat transfer will applied at the bottom of the surface .In this case ,I used Conjugate heat transfer mechanism .but i am getting error :Failed to evaluate operator.
- Operator: mean
- Geometry: 1
- Boundary: 1
Mean operator requires an adjacent entity of higher dimension.
Failed to evaluate expression.
- Expression: mean(comp1.nitf.mu)
Failed to evaluate variable.
- Variable: comp1.nitf.mu
- Geometry: 1
- Boundary: 1
Failed to evaluate expression.
- Expression: d((((-2*comp1.nitf.mu*comp1.uTx+comp1.p)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nxmesh,x)-comp1.nitf.mu*(comp1.uTy+comp1.vTx)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nymesh,x)-comp1.nitf.mu*(comp1.uTz+comp1.wTx)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nzmesh,x)-comp1.nitf.mu*(comp1.uTy+comp1.vTx)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nxmesh,y)+(-2*comp1.nitf.mu*comp1.vTy+comp1.p)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nymesh,y)-comp1.nitf.mu*(comp1.vTz+comp1.wTy)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nzmesh,y)-comp1.nitf.mu*(comp1.uTz+comp1.wTx)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nxmesh,z)-comp1.nitf.mu*(comp1.vTz+comp1.wTy)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nymesh,z)+(-2*comp1.nitf.mu*comp1.wTz+comp1.p)*dtang((test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.nzmesh,z))*comp1.nitf.Lentr-(test(comp1.u)*comp1.nitf.nxmesh+test(comp1.v)*comp1.nitf.nymesh+test(comp1.w)*comp1.nitf.nzmesh)*comp1.nitf.Pinlinl1)*(dvol),{test@24})
0 Replies Last Post Feb 27, 2017, 2:54 a.m. EST
COMSOL Moderator

Hello Sultan Mahmud

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content