Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

the boudary condition at the wall : Slip velocity

Posted Aug 6, 2017, 4:41 a.m. EDT Low-Frequency Electromagnetics, Computational Fluid Dynamics (CFD), Modeling Tools & Definitions, Parameters, Variables, & Functions Version 5.2 1 Reply

Sab Bina
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi all,

please, I need to understand the system of equations of the slip velocity and the jump temperatre in the wall boundary condition.
I work with "High Mach Number Flow" module.
If you can give me any reference article that demonstrate the same equations used in comsol, I will be very thankfull.
in the attached figure, the assumptions equations used in COMSOL.

Thank you in advance.
Best ragards. with COMSOL.

Thank you in advance.
Best regards.
1 Reply Last Post Aug 6, 2017, 4:42 a.m. EDT
Sab Bina
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago Aug 6, 2017, 4:42 a.m. EDT
the attached figure.
the attached figure.

Attachments:

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content