Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to select a study for a harmonic input signal in multiphysic
Posted Aug 25, 2017, 10:30 a.m. EDT Low-Frequency Electromagnetics, Heat Transfer & Phase Change, Modeling Tools & Definitions, Parameters, Variables, & Functions Version 5.3 0 Replies
Please login with a confirmed email address before reporting spam
I have some problems to select my study in COMSOL. I want to apply a voltage and current in so that the amplitudes of voltage/current in various frequencies are different. I know one way is that to choose time domain study but the problem is that as I want to use Thermal physic at the same time in a multiphysic state and response times of magnetic/electric physics and Thermal physics are very different, it take very long time for running the simulation (may hours). As COMSOL introduces frequency domain study in these cases, if my signal has different frequencies in range of 0 to 10 kHz with different voltage amplitudes, How can apply my signal or which study can I choose?
Hello Amir Parastar
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.