Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Convergence issue

Posted Sep 13, 2017, 9:02 a.m. EDT Version 5.3 0 Replies

Sahana
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am working on a 3D simulation for an h shaped fluidic channel. There are two different concentration of solution flowing through the two channels at different flowrates. I would like to look at the ocncnetration profile at the interconnect between the two channels. This works well at 2D, however, on 3D, it gives me convergence error. I have checked for various values of torences, but I cannot seem to solve the proble. Please let me know if you have an explnation or solution to this problem.

Thanks in Advance.

Sahana

0 Replies Last Post Sep 13, 2017, 9:02 a.m. EDT
COMSOL Moderator

Hello Sahana

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content