Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

The least pressure for calculating the plasma

Please login with a confirmed email address before reporting spam

Dear Specialists!

I would like to know what least pressure (vacuum) can be used in Plasma Modul.

Thanks and Regards


1 Reply Last Post Mar 20, 2018, 8:32 a.m. EDT
Daniel Smith COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 6 years ago Mar 20, 2018, 8:32 a.m. EDT

Hi Luigi, the exact answer also depends on what the characteristic geometry size is. For the fluid approximation (which is what COMSOL uses for the plasma) to be valid, the plasma must be collisional. Therefore the electron-neutral mean free path must be much smaller than the characteristic geometry size. So, for a reactor size on the order of centimeters, the pressure must be above around 20mtorr.

Hi Luigi, the exact answer also depends on what the characteristic geometry size is. For the fluid approximation (which is what COMSOL uses for the plasma) to be valid, the plasma must be collisional. Therefore the electron-neutral mean free path must be much smaller than the characteristic geometry size. So, for a reactor size on the order of centimeters, the pressure must be above around 20mtorr.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.