Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Which module i'm suppose to use for my simulation?
Posted Dec 9, 2009, 3:54 p.m. EST 0 Replies
Please login with a confirmed email address before reporting spam
I'm newbie of comsol,now have to doing simulation for my assignment.
Here is the pic that describe what i gonna to do,
img.photobucket.com/albums/v504/lynzax/prototype.jpg
A solid iron box(T:273.15K) center upper there have a aluminium hollow beam connected,
and have hot water(T:500K) flow thru the hollow beam with flow speed 1m/s,
after that the heat of hot water will spread to the iron box(heat transfer).
I have tested Fluid-thermal interaction>non-isothermal flow,
but i cant find the flow speed with temperature section(mean can key in the inlet water flow speed with temperature:500K together).
Hope anyone that know can kindly give me a suggestion or advise.
Thanks a lot!
Ches
Hello Ches Lai
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.