Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency dependend amplitude of a monopole source

Please login with a confirmed email address before reporting spam

Hi,

I like to use a monopole acoustic source but with an amplitude that varies with frequency. Is this possible ? I could imagine to have an acoustic source with an amplitude vector and a frequency vector.

Best regards

Stefan Willems


1 Reply Last Post Nov 7, 2018, 2:09 p.m. EST
Sergei Yushanov Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 5 years ago Nov 7, 2018, 2:09 p.m. EST

Stefan,

Use expression or interpolation function to define source amplitude as a function of frequency. Then, multiply source by the defined expression. The last step is to add parametric sweep over the source frequency, as shown in the attached mph file.

Regards,

Sergei

Stefan, Use expression or interpolation function to define source amplitude as a function of frequency. Then, multiply source by the defined expression. The last step is to add parametric sweep over the source frequency, as shown in the attached mph file. Regards, Sergei

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.