Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

simulation electric field distribution of high voltage on a rotating machine with high voltage supply

Please login with a confirmed email address before reporting spam

Hi, Currently, I have project in build a machine consists of motor , high voltage supply and metal syringe. The process of machine is metal syringe will be attached to the motor using insulator coupling and high voltage will be connected to the needle syringe. the schematic diagram as an attached file. The problem I had is when motor is rotate and positive high voltage supply connected the metal syringe while negative to the aluminium plate during the process, motor and high voltage will stop.

I already done simulation electric field potential high voltage supply but without motor.

My question is

  1. How to do simulation on high voltage electrostatic breakdown voltage?
  2. How should I input the rotating motor to the simulation?
  3. Is it using rotating machine 3D tutorial application?


0 Replies Last Post Jul 11, 2019, 1:56 a.m. EDT
COMSOL Moderator

Hello Norul Norzain

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.