Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to get voltage ?
Posted Jan 17, 2020, 12:08 p.m. EST Electromagnetics, Electromagnetic Heating, Low-Frequency Electromagnetics Version 5.3a 0 Replies
Please login with a confirmed email address before reporting spam
I have developed a COMSOL program to find voltage from coils.
In this program, i have placed a big cylinder, in opposite sites of cylinder i have placed 3 turn coils, one in clockwise(Coil1) and other in anticlockwise direction(Coil2). Ends of each coils are shorted. In the center of cylinder i have placed a ring with current I=1A. My aim is to find voltage in each coils. I am getting voltage in coil1 only but I don't know how to get voltage in coil2. Coil1, coil2 and ring are made of copper.
Kindly help. I have attached files.
In this uploaded program, I have cleared meah and study as I could not upload as file size is greater than 5MB.
Mesh I was using if fine mesh.
Any suggestions is highly appreciated.
Attachments:
Hello Shilpa George
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.