Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Vandium Redox Flow Battery Modeling without Porous Electrode

Posted Feb 8, 2020, 9:17 p.m. EST Battery Design 0 Replies

Swachwa Dey
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I've been trying to build a VRFB model based on built in model in Comsol library. I replaced the porous carbon electrode with a normal electrode and removed membrane section. While I replaced the porous carbon electrode with normal electrode at positive electrode section the boundary for inlet and outlet region selections are showing 'not applicable'.! Any body can help?

Attachments:

0 Replies Last Post Feb 8, 2020, 9:17 p.m. EST
COMSOL Moderator

Hello Swachwa Dey

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content