Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Natural Convection Heat Transfer

Posted Jul 21, 2009, 12:07 p.m. EDT 4 Replies

Nicolas Murer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I'm using the Conduction and Convection application mode to model the heat transfer resulting from a hot plate in an upward contact with water.
Does anyone know the expression of the velocity of the fluid for natural convection in these conditions ?
Thanks.

Nicolas
4 Replies Last Post Aug 19, 2009, 9:27 p.m. EDT
David Wenger Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 21, 2009, 12:46 p.m. EDT
The velocity depends on the heat transfer rate and the difference of density and temperature in your system. You need a heat transfer coefficient which is f(Re,Pr,Gr,...) and a temperature-dependent expression for the density or the Boussinesq-approximation.

Regards

David
www.comsol.de/company/consultants/wenger
The velocity depends on the heat transfer rate and the difference of density and temperature in your system. You need a heat transfer coefficient which is f(Re,Pr,Gr,...) and a temperature-dependent expression for the density or the Boussinesq-approximation. Regards David www.comsol.de/company/consultants/wenger
Nicolas Murer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 21, 2009, 2:31 p.m. EDT
There is a model in the model gallery which is very similar to my problem : free convection in a water glass
comsol.com/showroom/gallery/195/
Unfortunately, I don't find it in the Model Library. Is there another way to have access to this model ?

Thanks

Nicolas
There is a model in the model gallery which is very similar to my problem : free convection in a water glass http://comsol.com/showroom/gallery/195/ Unfortunately, I don't find it in the Model Library. Is there another way to have access to this model ? Thanks Nicolas
Nicolas Murer
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 21, 2009, 3:01 p.m. EDT

The velocity depends on the heat transfer rate and the difference of density and temperature in your system. You need a heat transfer coefficient which is f(Re,Pr,Gr,...) and a temperature-dependent expression for the density or the Boussinesq-approximation.

Regards

David
www.comsol.de/company/consultants/wenger


Thanks.
[QUOTE] The velocity depends on the heat transfer rate and the difference of density and temperature in your system. You need a heat transfer coefficient which is f(Re,Pr,Gr,...) and a temperature-dependent expression for the density or the Boussinesq-approximation. Regards David www.comsol.de/company/consultants/wenger [/QUOTE] Thanks.
rodrigo bassan
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 19, 2009, 9:27 p.m. EDT
hi, someone have or know where I can found the solution manual of book Convection Heat Transfer, third edition of author Adrian Bejan, because I need very much in my pos-graduate. thanks.

my e mail is augusto_bassan@yahoo.com.br

hi, someone have or know where I can found the solution manual of book Convection Heat Transfer, third edition of author Adrian Bejan, because I need very much in my pos-graduate. thanks. my e mail is augusto_bassan@yahoo.com.br

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content