Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Rotational Friction
Posted May 21, 2020, 10:32 a.m. EDT Structural & Acoustics, Heat Transfer & Phase Change 2 Replies
Please login with a confirmed email address before reporting spam
Hi everybody, I have checked out your blogs but I have not been able to find how to do a 3D simulation that get the heat from the friction between two boundaries with only relative rotational speed. I want to use the node "contact" but I am not sure if a rotational movement is supported.
Hello Luis Gonzalez
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Hello Luis Gonzalez
I also want to build a frictional heat model, but I have encountered the same problem as you. How did you solve it?
Thank you
Please login with a confirmed email address before reporting spam
Hello Luis Gonzalez
I also want to build a frictional heat model, but I have encountered the same problem as you. How did you solve it?
Thank you
At the moment, I have suppossed the thermal behavior as a function of the radius and the thermal contact pressure. Then, I am working on the mecanical phenomenom.