Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
simulating vapor flow in a chamber
Posted May 25, 2022, 12:03 p.m. EDT Fluid & Heat, Computational Fluid Dynamics (CFD) 0 Replies
Please login with a confirmed email address before reporting spam
Hi All,
I have used COMSOL in the past for simulated electrodynamic systems. I am currently venturing into the CFD module. I am building a chamber which will be fed by a fog machine and would like to simulate this system. The chamber is at atmospheric pressure and has an inlet and an outlet. I am assuming that I would want to simulate it with two phased turbulent flow since it is a mixed of the vapor and air. I'm not sure where to begin such as which studies I should use. Any examples to help me get the ball rolling could help.
Best, Daniel
Hello Daniel Heligman
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.