Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
URGENT : Time dependent simulation
Posted Oct 1, 2012, 9:41 AM EDT Structural Mechanics & Thermal Stresses Version 4.2 0 Replies
I am trying to model an energy harvester in which discrete pressures must be applied one after the other. The pressure applied is not continuous but varying values of pressure is applied one after the other in short succession.
On the whole , a varying values of pressure are applied to the energy harvester and it must produce varying values of voltage continuously , as long as pressure is applied.
I found that even 'Time Dependent' study does not give a provision to model such a situation. It would be of great help if you can guide me through the steps involved.
Thanking you in advance,
Hello Vijay Ramakrishnan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.