Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

coil winding direction

How do I determine the direction of the magnetic induction in multi turn coils.

Thank.

1 Reply Last Post Feb 13, 2013, 1:32 PM EST
Posted: 5 years ago Feb 13, 2013, 1:32 PM EST
Hi

in 2D via the sign, in 3D via the loop sub node (right click multiturn/signle turn coil node and add corresponding sub-node "Edge reference")

it's described in the 4.3a ACDC user manual, under "Coil Domains" section probably in earleier versions too

--
Good luck
Ivar
Hi in 2D via the sign, in 3D via the loop sub node (right click multiturn/signle turn coil node and add corresponding sub-node "Edge reference") it's described in the 4.3a ACDC user manual, under "Coil Domains" section probably in earleier versions too -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.