Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Settings for simulating static or rf field between metallic contacts

Hi, I'm a new Comsol user and I'm interested to simulate the 2d field between two electrodes on a substrate. The electrodes can work at low but also at high frequencies. I've been able to draw the metallic contacts on top of the substrate but I don't know how to put a voltage between the two contacts in order to create an electric field between them. Can someone give me an hint?
Thanks

1 Reply Last Post Apr 4, 2013, 5:03 PM EDT
Posted: 5 years ago Apr 4, 2013, 5:03 PM EDT
Hi

check the lumped Terminal / Ports BC's (Boundary conditions). And take a look at some of the model library models, as well as the videos on the main web site, these are great to learn from

--
Good luck
Ivar
Hi check the lumped Terminal / Ports BC's (Boundary conditions). And take a look at some of the model library models, as well as the videos on the main web site, these are great to learn from -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.