Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Connecting materials

Posted Apr 8, 2013, 12:38 a.m. EDT Version 4.3a 1 Reply

Myung Rae Cho
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to connect two separate domains, composed of different materials.

What kind of boundary conditions should I impose to achieve it?

Thank you.
1 Reply Last Post Apr 8, 2013, 12:52 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 8, 2013, 12:52 a.m. EDT
Hi

it depends what you want to do, but in 90% of the cases the standard default "continuity" that you get from a standard geometry "union" Finish mode is what is required

--
Good luck
Ivar
Hi it depends what you want to do, but in 90% of the cases the standard default "continuity" that you get from a standard geometry "union" Finish mode is what is required -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content