Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Modelling 2 domains for voltage and field calculations using meridional electric currents mode
Posted May 22, 2010, 5:15 p.m. EDT 0 Replies
Please login with a confirmed email address before reporting spam
I have successfully meshed it. I tried solving it using a nonlinear solver as mine is a non-linear problem and with no success. As soon as the solver starts, there is an error no. 7248 that shows up as:
Exception:
com.femlab.jni.FlNativeException: Undefined value found Solvermodel
Messages:
Undefined value found Solvermodel
Stack trace:
at solvermodel.cpp, row 1837, (Undefined value found in the equation residual vector.
There are 1251 degrees of freedom giving NaN/Inf in the vector for the variable V1
at coordinates: (2.27815e-005,-1.48e-005), (2.28015e-005,-1.48e-005), (2.28215e-005,-1.48e-005), (2.33416e-005,-1.48e-005), (2.33015e-005,-1.48e-005), ...
There are 1251 degrees of freedom giving NaN/Inf in the vector for the variable V2
at coordinates: (2.27815e-005,-1.48e-005), (2.28015e-005,-1.48e-005), (2.28215e-005,-1.48e-005), (2.33416e-005,-1.48e-005), (2.33015e-005,-1.48e-005), ...
)
at com.femlab.solver.FlSolver.femStatic(Native Method)
at com.femlab.solver.FemStatic.run(Unknown Source)
at com.femlab.server.FlRunner.run(Unknown Source)
at com.femlab.util.i.run(Unknown Source)
at com.femlab.util.aa.run(Unknown Source)
Could you please suggest me a solution as quickly as possible to get this working.
Thanks in advance.
Hello Harsha KASI
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.